{"product_id":"3-8-rope-splicer-fid-tool-frv-129-6","title":"FAIRVIEW 3\/8\" Rope Splicer Fid Tool (FRV-129-6)","description":"\u003ch2\u003e3\/8\" Rope Splicer Fid Tool\u003c\/h2\u003e\u003cp\u003eSplice 3\/8\" braided and double-braid marine line cleanly and efficiently with this purpose-made splicer fid. Sized specifically for 3\/8\" rope, the FRV-129-6 is the right tool for performing eye splices, end-to-end splices, and bury splices in the braided line used for dock lines, halyards, sheets, and mooring pendants — producing strong, professional-quality splices without the need for knots.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/8\" Rope Specific\u003c\/strong\u003e — Sized and tapered for 3\/8\" diameter braided and double-braid line; using the correct fid size is critical for clean, tight splices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHollow \/ Tubular Design\u003c\/strong\u003e — Hollow fid allows the working strand to be threaded through the tool and pulled through the rope core in a single smooth motion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Tapered Tip\u003c\/strong\u003e — Tapered nose opens the rope braid cleanly without snagging or damaging fibres, making strand insertion easier and reducing splice time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e — Rigid construction withstands the tension required to pull strands through tight braided rope without bending or deforming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEssential Splicing Tool\u003c\/strong\u003e — A correctly sized fid is the single most important tool for producing strong, reliable splices in braided line\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope Diameter:\u003c\/strong\u003e 3\/8\" (9.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Hollow splicer fid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Rope:\u003c\/strong\u003e Braided, double-braid, and single-braid marine line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Eye splices, end-to-end splices, bury splices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e FRV-129-6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Splice Instead of Knot?\u003c\/h3\u003e\u003cp\u003eA properly executed splice retains 90–100% of the rope's rated breaking strength, compared to 50–75% for most knots. Spliced eyes and terminations are also more compact, snag-free, and longer-lasting than knotted connections — making them the preferred choice for permanent dock lines, mooring pendants, halyard terminations, and any application where maximum strength and a clean finish matter.\u003c\/p\u003e\u003ch3\u003eCommon Splicing Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye splice\u003c\/strong\u003e — Permanent loop at the end of a dock line, mooring pendant, or anchor rode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-to-end splice\u003c\/strong\u003e — Joining two lines of the same diameter for extended length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBury splice\u003c\/strong\u003e — Terminating a halyard or sheet tail inside the standing part for a clean, low-profile finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThimble eye splice\u003c\/strong\u003e — Splicing a thimble into a dock line or mooring pendant for shackle attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUsage Notes\u003c\/h3\u003e\u003cp\u003eAlways use a fid sized to match your rope diameter — a fid that is too large will damage the braid; one that is too small will not open the rope sufficiently for clean strand insertion. Follow the rope manufacturer's splicing instructions for your specific rope construction (8-braid, 12-braid, double-braid). Tape the working end of the strand before threading to prevent fraying. Practice on a short scrap of rope before splicing your working line.\u003c\/p\u003e\u003cp\u003eThe FRV-129-6 is a simple, essential tool — if you work with 3\/8\" braided line, a correctly sized fid belongs in your toolkit.\u003c\/p\u003e","brand":"WEST","offers":[{"title":"Default Title","offer_id":43564150161444,"sku":"FRV-129-6","price":3.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/3_8_Rope_Splicer_Fid_Tool.jpg?v=1776460128","url":"https:\/\/marisolmarine.com\/products\/3-8-rope-splicer-fid-tool-frv-129-6","provider":"Marisol Marine Company","version":"1.0","type":"link"}