{"product_id":"hansen-stainless-steel-clevis-pin-1-4-x-1-1-4-han-370271","title":"HANDIMAN Stainless Steel Clevis Pin 1\/4\" x 1-1\/4\" (HAN-370271)","description":"\u003ch2\u003eHansen Stainless Steel Clevis Pin — 1\/4\" x 1-1\/4\"\u003c\/h2\u003e\n\u003cp\u003eConnect rigging, control cables, and steering linkages with precision using this marine-grade stainless steel clevis pin. At 1\/4\" diameter and 1-1\/4\" length, the HAN-370271 is a versatile, corrosion-resistant pin suited to a wide range of marine hardware connections — from throttle and shift cable ends to standing rigging toggles, turnbuckles, and deck hardware pivot points.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e316 Stainless Steel Construction\u003c\/strong\u003e — Corrosion-resistant alloy withstands continuous exposure to salt water, UV, and the mechanical stress of control and rigging applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Dimensions\u003c\/strong\u003e — 1\/4\" (6.35mm) diameter x 1-1\/4\" (31.75mm) length; verify clevis jaw width and pin hole diameter before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Shank\u003c\/strong\u003e — Precision-ground shank ensures a clean, low-friction fit through clevis jaws, toggles, and cable end fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCotter Pin \/ Ring Compatible\u003c\/strong\u003e — Standard clevis pin geometry accepts cotter pins, ring pins, or hairpin clips for positive retention in the installed position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHansen Quality\u003c\/strong\u003e — Hansen is a trusted supplier of marine-grade stainless hardware components used in rigging and control system applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e HANDIMAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 316 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1\/4\" (6.35mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1-1\/4\" (31.75mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Style:\u003c\/strong\u003e Standard clevis pin head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetention:\u003c\/strong\u003e Cotter pin \/ ring pin \/ hairpin clip (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rigging toggles, turnbuckles, steering linkage, throttle\/shift cable ends, deck hardware pivots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e HAN-370271\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Marine Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStanding rigging:\u003c\/strong\u003e Toggle and turnbuckle pin connections on sailboat shrouds and stays\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering systems:\u003c\/strong\u003e Tiller arm, rudder linkage, and steering cable end connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl cables:\u003c\/strong\u003e Throttle, shift, and choke cable end clevis connections on outboard and inboard engines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeck hardware:\u003c\/strong\u003e Pivot pins for blocks, travellers, cam cleats, and other deck-mounted hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor \u0026amp; mooring:\u003c\/strong\u003e Shackle and chain connector pivot applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the clevis jaw inside width and pin hole diameter match the 1\/4\" pin before installation. Insert the pin fully through the clevis jaws and fitting, then secure with a cotter pin, ring pin, or hairpin clip through the cotter hole at the pin tip. Spread cotter pin legs fully to prevent backing out. Inspect pins annually for wear, bending, or corrosion and replace if any deformation is found. Never reuse a bent or deformed clevis pin.\u003c\/p\u003e\n\u003cp\u003eKeep a selection of stainless clevis pins aboard — the HAN-370271 is one of the most common sizes in marine control and rigging systems, and having a spare on hand prevents unnecessary downtime.\u003c\/p\u003e","brand":"WEST","offers":[{"title":"Default Title","offer_id":43564162908196,"sku":"HAN-370271","price":17.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/4916802577.jpg?v=1776453587","url":"https:\/\/marisolmarine.com\/products\/hansen-stainless-steel-clevis-pin-1-4-x-1-1-4-han-370271","provider":"Marisol Marine Company","version":"1.0","type":"link"}