{"product_id":"jabsco-1210-0001-p-neoprene-impeller-kit","title":"Jabsco 1210-0001-P Neoprene Impeller Kit","description":"\u003ch2\u003e\u003cstrong\u003eJabsco Profile K Neoprene Impeller Kit – 1210-0001-P \/ 6-12100001P\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jabsco 1210-0001-P is a 12-blade neoprene flexible impeller kit for compatible marine engine-cooling, fresh-water transfer, salt-water transfer and general-purpose bronze pumps. It features a brass spline-drive hub and measures approximately 2-1\/4 inches in diameter by 1-1\/4 inches wide. Neoprene is the standard compound for raw-water cooling and water-transfer applications where exposure to oil or diesel fuel is minimal.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJabsco part number: \u003cstrong\u003e1210-0001-P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLand 'N' Sea SKU: \u003cstrong\u003e6-12100001P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpeller profile: \u003cstrong\u003eK\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwelve flexible blades\u003c\/li\u003e\n\u003cli\u003eNeoprene construction\u003c\/li\u003e\n\u003cli\u003eBrass hub insert\u003c\/li\u003e\n\u003cli\u003eSpline-drive connection\u003c\/li\u003e\n\u003cli\u003eDrive size: \u003cstrong\u003e7\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutside diameter: \u003cstrong\u003e2-1\/4 in \/ 57 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth: \u003cstrong\u003e1-1\/4 in \/ approximately 31.5–32 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eShaft diameter: \u003cstrong\u003e5\/8 in \/ approximately 16 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: \u003cstrong\u003e671880570718\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eService-kit references include the impeller, spline seal or plug and applicable sealing components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePump Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 1210-0001-P is used across a broad range of compatible Jabsco flexible-impeller pumps, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1673-series\u003c\/li\u003e\n\u003cli\u003e3270-series\u003c\/li\u003e\n\u003cli\u003e3370-series\u003c\/li\u003e\n\u003cli\u003e3380-series\u003c\/li\u003e\n\u003cli\u003e5850-series\u003c\/li\u003e\n\u003cli\u003e6490-series\u003c\/li\u003e\n\u003cli\u003e9970-series\u003c\/li\u003e\n\u003cli\u003e9990-series\u003c\/li\u003e\n\u003cli\u003e10550-series\u003c\/li\u003e\n\u003cli\u003e10950 and 10970-series\u003c\/li\u003e\n\u003cli\u003e11410 and 11850-series\u003c\/li\u003e\n\u003cli\u003e21690 and 21820-series\u003c\/li\u003e\n\u003cli\u003e29500, 29520, 29530 and 29540-series\u003c\/li\u003e\n\u003cli\u003e50280-series\u003c\/li\u003e\n\u003cli\u003e52040-series\u003c\/li\u003e\n\u003cli\u003eJohnson Pump \u003ca href=\"\/products\/8131455090724\"\u003e\u003cstrong\u003e09-1027B-10 Impeller Kit\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe complete pump model should always be checked because some pump families were offered with different impeller compounds or internal configurations.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eEngine and Generator Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSupported OEM cross-references place this impeller in compatible raw-water pumps used on selected:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo Penta marine engines\u003c\/li\u003e\n\u003cli\u003eYanmar marine engines\u003c\/li\u003e\n\u003cli\u003eOnan generators\u003c\/li\u003e\n\u003cli\u003ePerkins marine engines\u003c\/li\u003e\n\u003cli\u003eJohnson Pump installations\u003c\/li\u003e\n\u003cli\u003eVetus cooling systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatibility is determined by the installed pump and original impeller number rather than engine brand alone.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFitment Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBefore ordering, confirm that the original impeller requires:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwelve blades\u003c\/li\u003e\n\u003cli\u003e57 mm outside diameter\u003c\/li\u003e\n\u003cli\u003eApproximately 32 mm width\u003c\/li\u003e\n\u003cli\u003e16 mm spline-drive shaft\u003c\/li\u003e\n\u003cli\u003eBrass insert\u003c\/li\u003e\n\u003cli\u003eProfile K configuration\u003c\/li\u003e\n\u003cli\u003eNeoprene construction\u003c\/li\u003e\n\u003cli\u003eJabsco 1210-0001 or 1210-0001-P specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not confuse this impeller with the \u003ca href=\"\/products\/11110181077028\"\u003e\u003cstrong\u003e1210-0003-P nitrile impeller kit\u003c\/strong\u003e\u003c\/a\u003e. Both versions share the same dimensions and spline-drive configuration, but the 1210-0001-P is neoprene for engine cooling and water transfer, while the 1210-0003-P is nitrile for bilge or transfer applications involving heavier oil and diesel contamination.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhen This Part Needs Replacement\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eReplace the impeller when:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaw-water or exhaust-water flow becomes weak\u003c\/li\u003e\n\u003cli\u003eEngine or generator temperature begins rising\u003c\/li\u003e\n\u003cli\u003eThe pump becomes difficult to prime\u003c\/li\u003e\n\u003cli\u003eThe blades are cracked, hardened or permanently curved\u003c\/li\u003e\n\u003cli\u003eBlade tips are torn or missing\u003c\/li\u003e\n\u003cli\u003eThe brass spline hub becomes loose or damaged\u003c\/li\u003e\n\u003cli\u003eThe pump has operated dry\u003c\/li\u003e\n\u003cli\u003eAnnual preventive cooling-system service is due\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA flexible impeller should be replaced preventively rather than being operated until the blades fail and enter the cooling system.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStop the engine and isolate the starting circuit.\u003c\/li\u003e\n\u003cli\u003eClose the raw-water intake seacock.\u003c\/li\u003e\n\u003cli\u003eRemove the pump end cover and old gasket or O-ring.\u003c\/li\u003e\n\u003cli\u003ePull the old impeller by gripping the hub with a suitable removal tool or pliers.\u003c\/li\u003e\n\u003cli\u003eDo not pry against the pump face with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eRecover missing blade fragments from hoses, oil coolers and heat exchangers.\u003c\/li\u003e\n\u003cli\u003eInspect the pump bore, cam, cover plate, shaft and splines.\u003c\/li\u003e\n\u003cli\u003eApply a light coating of suitable lubricant to the impeller bore and blades.\u003c\/li\u003e\n\u003cli\u003eAlign the brass spline hub carefully with the pump shaft.\u003c\/li\u003e\n\u003cli\u003eInstall the correct spline seal and cover sealing component.\u003c\/li\u003e\n\u003cli\u003eReopen the seacock and verify strong water flow immediately after startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA light coating of lubricant assists installation and helps protect the impeller during initial dry priming.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAlternate \/ Cross-Reference Part Numbers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJabsco: \u003cstrong\u003e1210-0001-P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEarlier Jabsco number: \u003cstrong\u003e1210-0001\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLand 'N' Sea SKU: \u003cstrong\u003e6-12100001P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact format: \u003cstrong\u003e12100001P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVolvo Penta: \u003cstrong\u003e860203\u003c\/strong\u003e, \u003cstrong\u003e3856039-7\u003c\/strong\u003e, \u003cstrong\u003e875811-2\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eYanmar: \u003cstrong\u003e129470-42530\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eJohnson Pump: \u003cstrong\u003e09-1027B\u003c\/strong\u003e, \u003cstrong\u003e09-1027B-1\u003c\/strong\u003e, \u003cstrong\u003e09-1028B-9\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVetus: \u003cstrong\u003eIMP00201\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAncor: \u003cstrong\u003eJ050007\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCEF: \u003cstrong\u003e500107\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnan: \u003cstrong\u003e132-0162\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePerkins: \u003cstrong\u003e0460038\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: \u003cstrong\u003e671880570718\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eParts Desk Insight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 1210-0001-P and \u003ca href=\"\/products\/11110181077028\"\u003e1210-0003-P\u003c\/a\u003e are physically similar, so the fluid being pumped is the critical distinction. Choose this \u003cstrong\u003eneoprene 0001 version\u003c\/strong\u003e for raw-water cooling and normal fresh- or salt-water transfer. Confirm the 12-blade, 57 × 32 mm configuration and 5\/8-inch spline hub before ordering.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51156140916772,"sku":"6-12100001P","price":91.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/534e5b5e-7175-4358-a0e7-edb2eee88df1.png?v=1785195402","url":"https:\/\/marisolmarine.com\/products\/jabsco-1210-0001-p-neoprene-impeller-kit","provider":"Marisol Marine Company","version":"1.0","type":"link"}