{"product_id":"jabsco-22405-0001-p-profile-d-neoprene-impeller-kit","title":"Jabsco 22405-0001-P Profile D Neoprene Impeller Kit","description":"\u003ch2\u003e\u003cstrong\u003eJabsco Profile D Neoprene Impeller Kit – 22405-0001-P \/ 6-224050001P\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Jabsco 22405-0001-P is a six-blade neoprene flexible impeller kit for compatible marine engine-cooling, bilge, transfer and general-purpose bronze pumps. It uses a brass hub with a slotted pin-drive connection and is intended primarily for fresh water, salt water and raw-water cooling applications where only small amounts of oil or diesel contamination may be present.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJabsco part number: \u003cstrong\u003e22405-0001-P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLand 'N' Sea SKU: \u003cstrong\u003e6-224050001P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eImpeller profile: \u003cstrong\u003eD\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSix flexible blades\u003c\/li\u003e\n\u003cli\u003eNeoprene construction\u003c\/li\u003e\n\u003cli\u003eBrass hub insert\u003c\/li\u003e\n\u003cli\u003eSlotted shaft with pin drive\u003c\/li\u003e\n\u003cli\u003eOutside diameter: \u003cstrong\u003e1-9\/16 in \/ 40 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth: \u003cstrong\u003e3\/4 in \/ 19 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eShaft diameter: \u003cstrong\u003e15\/32 in \/ approximately 12 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackaged as an impeller service kit with sealing components and installation lubricant\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: \u003cstrong\u003e671880574747\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003ePump Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDocumented Jabsco pump applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJabsco \u003cstrong\u003e29300-2001C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eJabsco \u003cstrong\u003e29300-2201C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eJabsco \u003cstrong\u003e52010-2051\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOther compatible 29300- and 52010-series pumps requiring a 40 × 19 mm Profile D impeller with a 12 mm slotted pin-drive hub\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways verify the complete pump number, as similar Profile D impellers may use different shaft diameters.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eEngine Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eDocumented engine applications include compatible installations on:\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eVolvo Penta\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMB10A and MB11\u003c\/li\u003e\n\u003cli\u003eMB1KHD, MB1KHY and MB2\u003c\/li\u003e\n\u003cli\u003eMD2 and MD2B\u003c\/li\u003e\n\u003cli\u003eMD2BHY\u003c\/li\u003e\n\u003cli\u003eMD5A, MD5B and MD5C\u003c\/li\u003e\n\u003cli\u003eMD10 and MD10A\u003c\/li\u003e\n\u003cli\u003eMD11C and MD11D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eGenerator Applications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelected Westerbeke \u003cstrong\u003e8–10 kW\u003c\/strong\u003e generator raw-water pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment should be confirmed through the installed pump number or the engine’s cooling-system parts diagram.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFitment Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eBefore ordering, confirm that the original impeller requires:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSix blades\u003c\/li\u003e\n\u003cli\u003eApproximately 40 mm outside diameter\u003c\/li\u003e\n\u003cli\u003e19 mm width\u003c\/li\u003e\n\u003cli\u003eApproximately 12 mm shaft diameter\u003c\/li\u003e\n\u003cli\u003eSlotted pin-drive hub\u003c\/li\u003e\n\u003cli\u003eBrass insert\u003c\/li\u003e\n\u003cli\u003eNeoprene construction\u003c\/li\u003e\n\u003cli\u003eProfile D configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not confuse this impeller with the \u003ca href=\"\/products\/jabsco-4528-0001-p-profile-d-neoprene-impeller-kit\"\u003eJabsco 4528-0001-P\u003c\/a\u003e. Both are six-blade Profile D neoprene impellers measuring approximately 40 × 19 mm, but the 4528-0001-P uses a smaller \u003cstrong\u003e3\/8-inch shaft\u003c\/strong\u003e, while the 22405-0001-P uses a \u003cstrong\u003e15\/32-inch \/ 12 mm shaft\u003c\/strong\u003e. The two are not interchangeable.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatible \u0026amp; Related Products\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/johnson-pump-09-808b-1-mc97-impeller-for-f35-pumps-replaces-jabsco-22405-0001\"\u003eJohnson Pump 09-808B-1 MC97 Impeller – Replaces Jabsco 22405-0001\u003c\/a\u003e – direct OEM-equivalent for F35 pump applications\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/jabsco-4528-0001-p-profile-d-neoprene-impeller-kit\"\u003eJabsco 4528-0001-P Profile D Neoprene Impeller Kit\u003c\/a\u003e – same Profile D dimensions, smaller 3\/8-inch shaft — confirm shaft size before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eWhen This Part Needs Replacement\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eReplace the impeller when:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaw-water or transfer-pump output decreases\u003c\/li\u003e\n\u003cli\u003eExhaust-water discharge becomes weak\u003c\/li\u003e\n\u003cli\u003eEngine temperature starts rising\u003c\/li\u003e\n\u003cli\u003eThe pump becomes difficult to prime\u003c\/li\u003e\n\u003cli\u003eThe blades become cracked, hardened or permanently folded\u003c\/li\u003e\n\u003cli\u003eBlade tips are torn or missing\u003c\/li\u003e\n\u003cli\u003eThe brass hub becomes loose\u003c\/li\u003e\n\u003cli\u003eThe pump has operated dry\u003c\/li\u003e\n\u003cli\u003eAnnual preventive maintenance is due\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFlexible impellers should be inspected regularly and replaced preventively, especially when used in an engine-cooling system.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStop the engine and isolate the starting system.\u003c\/li\u003e\n\u003cli\u003eClose the raw-water seacock or applicable isolation valve.\u003c\/li\u003e\n\u003cli\u003eRemove the pump cover and existing gasket or O-ring.\u003c\/li\u003e\n\u003cli\u003ePull the old impeller using an impeller puller or suitable pliers gripping the hub.\u003c\/li\u003e\n\u003cli\u003eDo not pry against the pump body with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eRecover any missing blade fragments from hoses, coolers and heat exchangers.\u003c\/li\u003e\n\u003cli\u003eInspect the cover plate, cam, housing, shaft and drive pin for wear.\u003c\/li\u003e\n\u003cli\u003eLubricate the new impeller before installation.\u003c\/li\u003e\n\u003cli\u003eAlign the slot in the brass hub with the pump-shaft drive pin.\u003c\/li\u003e\n\u003cli\u003eInstall the supplied sealing component and refit the cover.\u003c\/li\u003e\n\u003cli\u003eReopen the seacock and verify strong water flow immediately after startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNever operate a neoprene flexible-impeller pump dry.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAlternate \/ Superseded Part Numbers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent packaged number: \u003cstrong\u003e22405-0001-P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEarlier Jabsco number: \u003cstrong\u003e22405-0001\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlternate packaging reference: \u003cstrong\u003e22405-0001B\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLand 'N' Sea SKU: \u003cstrong\u003e6-224050001P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact format: \u003cstrong\u003e224050001P\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eJohnson Pump: \u003cstrong\u003e09-808B \/ 09-808B-1\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVolvo Penta: \u003cstrong\u003e833995, 875583-7\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVetus: \u003cstrong\u003eIMP00601\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAncor: \u003cstrong\u003eJ050021\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCEF: \u003cstrong\u003e500121\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: \u003cstrong\u003e671880574747\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eParts Desk Insight – Best Use\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe 22405-0001-P is the correct service impeller for Volvo Penta MD2\/MD5\/MD10\/MD11-series diesel auxiliaries and Jabsco 29300\/52010-series pumps — a common combination in cruising sailboats and small commercial vessels.\u003c\/strong\u003e The defining identifier is the \u003cstrong\u003e15\/32-inch (12 mm) brass pin-drive hub\u003c\/strong\u003e: this is the larger of the two Profile D impellers in the Jabsco range, and it is frequently confused with the \u003ca href=\"\/products\/jabsco-4528-0001-p-profile-d-neoprene-impeller-kit\"\u003e4528-0001-P\u003c\/a\u003e, which shares the same 40 × 19 mm outer dimensions but uses a smaller 3\/8-inch shaft. Installing the wrong shaft size will result in a loose hub and immediate pump failure. The \u003ca href=\"\/products\/johnson-pump-09-808b-1-mc97-impeller-for-f35-pumps-replaces-jabsco-22405-0001\"\u003eJohnson Pump 09-808B-1\u003c\/a\u003e is the direct OEM-equivalent for F35 pump applications. Always recover all blade fragments from heat exchangers and oil coolers before restarting the engine.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51156141244452,"sku":"6-224050001P","price":70.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/131a16a5-5019-4b96-a8b0-37ceb6391aac.png?v=1785185550","url":"https:\/\/marisolmarine.com\/products\/jabsco-22405-0001-p-profile-d-neoprene-impeller-kit","provider":"Marisol Marine Company","version":"1.0","type":"link"}