{"product_id":"lenco-15180001-pro-control-auto-replacement-imu","title":"Lenco Pro Control Auto Replacement IMU (15180-001)","description":"\u003ch2\u003eLenco Pro Control Auto Replacement IMU\u003c\/h2\u003e\u003cp\u003eThe IMU (Inertial Measurement Unit) is the sensor at the heart of the Lenco Pro Control Auto trim tab system. It continuously measures the vessel’s pitch and roll, feeding real-time data to the controller so the trim tabs adjust automatically to keep the boat level — without any input from the operator.\u003c\/p\u003e\u003cp\u003eIf your Pro Control Auto system has lost its auto-levelling function while the keypads and actuators are still working, a failed IMU is the most common cause. This direct OEM replacement restores full automatic trim tab operation and connects to your existing CAN bus network using a standard Micro C drop cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM replacement for the Lenco Pro Control Auto IMU (15180-001)\u003c\/li\u003e\n\u003cli\u003eMeasures vessel pitch and roll in real time for automatic trim tab adjustment\u003c\/li\u003e\n\u003cli\u003eCAN bus communication — integrates with existing Pro Control Auto controllers and keypads\u003c\/li\u003e\n\u003cli\u003eCompact, marine-rated housing designed for permanent onboard installation\u003c\/li\u003e\n\u003cli\u003eCompatible with all Pro Control Auto trim tab system configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e(1) Pro Control Auto IMU (15180-001)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eNote: A Micro C drop cable is required for installation and is not included. See the \u003ca href=\"\/products\/lenco-6-micro-c-drop-cable-pro-control-15199101\"\u003eLenco 6’ Micro C Drop Cable (15199101)\u003c\/a\u003e if needed.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eCompatible Systems\u003c\/h3\u003e\u003cp\u003eThis IMU is compatible with all Lenco Pro Control Auto trim tab systems. It is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Pro Control Assist series, which does not use an IMU. For complete Pro Control Auto system kits, see:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15182107-pro-control-auto-12v-trim-tab-system-9-x-12-standard-trim-tab-kit-complete\"\u003eLenco Pro Control Auto 12V Trim Tab System – 9\" × 12\" Complete Kit (15182-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15184107-pro-control-auto-12v-trim-tab-system-12-x-12-standard-trim-tab-kit-complete\"\u003eLenco Pro Control Auto 12V Trim Tab System – 12\" × 12\" Complete Kit (15184-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15186107-pro-control-auto-12v-trim-tab-system-12-x-12-edge-mount-trim-tab-kit-complete\"\u003eLenco Pro Control Auto 12V Trim Tab System – 12\" × 12\" Edge Mount Complete Kit (15186-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Products\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15172107-pro-control-auto-controller-kit\"\u003eLenco Pro Control Auto Controller Kit (15172-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15174107-pro-control-auto-replacement-keypad-kit\"\u003eLenco Pro Control Auto Replacement Helm Keypad Kit (15174-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15176107-pro-control-auto-flybridge-keypad-kit\"\u003eLenco Pro Control Auto Flybridge Keypad Kit (15176-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch3\u003eParts Desk Insights\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBest Use Case:\u003c\/strong\u003e This is the correct part when a customer’s Pro Control Auto system has stopped auto-levelling but the keypads and actuators are still responding. The IMU is the most common point of failure when auto-levelling is lost. Before ordering, confirm the controller and keypads are still communicating — if the entire system is unresponsive, the issue may be with the controller instead (see the \u003ca href=\"\/products\/lenco-15172107-pro-control-auto-controller-kit\"\u003ePro Control Auto Controller Kit (15172-107)\u003c\/a\u003e).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto Series Only:\u003c\/strong\u003e The IMU is exclusive to the Pro Control \u003cem\u003eAuto\u003c\/em\u003e series. The Pro Control Assist series does not use an IMU and has no equivalent part. If a customer with an Assist system asks about auto-levelling, they would need to upgrade to a full Auto system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCable Required:\u003c\/strong\u003e The IMU connects via a Micro C drop cable, which is not included. Confirm the customer has a spare port and cable available, or add the \u003ca href=\"\/products\/lenco-6-micro-c-drop-cable-pro-control-15199101\"\u003eLenco 6’ Micro C Drop Cable (15199101)\u003c\/a\u003e to the order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMounting Location:\u003c\/strong\u003e The IMU must be mounted on a flat, level surface aligned with the vessel’s centerline for accurate readings. Advise customers to follow the installation guide carefully for correct orientation.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51233043218468,"sku":"622-15180001","price":548.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/622-15180001.jpg?v=1786152477","url":"https:\/\/marisolmarine.com\/products\/lenco-15180001-pro-control-auto-replacement-imu","provider":"Marisol Marine Company","version":"1.0","type":"link"}