{"product_id":"lenco-15182107-pro-control-auto-12v-trim-tab-system-9x12-standard-kit","title":"Lenco Pro Control Auto 12V Trim Tab System – 9\" x 12\" Standard Kit (15182-107)","description":"\u003ch2\u003eLenco Pro Control Auto 12V Trim Tab System – 9\" × 12\" Standard Kit\u003c\/h2\u003e\u003cp\u003eExperience hands-free trim tab control with the Lenco Pro Control Auto system. This complete 9\" × 12\" standard mount kit includes everything needed to install a fully automatic trim tab system — blades, actuators, controller keypad, IMU sensor, and all required cabling.\u003c\/p\u003e\u003cp\u003eThe Pro Control Auto uses an integrated IMU (Inertial Measurement Unit) to continuously measure the vessel’s pitch and roll, automatically adjusting the trim tabs to keep the boat level without any operator input. When conditions change — shifting weight, varying speeds, or choppy water — the system responds in real time. The flush-mount keypad also supports manual override and Day and Night display modes for full operator control when you want it.\u003c\/p\u003e\u003cp\u003eThe 9\" × 12\" standard blade size is well suited to center console fishing boats, cuddy cabin cruisers, and similar mid-size hulls in the 17–22 ft range. Blades are fabricated from 12-gauge 304 stainless steel with a 5\/8\" flared trailing edge for long-term corrosion resistance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete system — blades, actuators, keypad, IMU, and all cabling included\u003c\/li\u003e\n\u003cli\u003eAuto-levelling via IMU — continuously adjusts trim tabs based on real-time pitch and roll\u003c\/li\u003e\n\u003cli\u003eManual override available at any time via the flush-mount keypad\u003c\/li\u003e\n\u003cli\u003eDay and Night display modes for all-condition readability\u003c\/li\u003e\n\u003cli\u003eCAN bus architecture — clean, expandable wiring with simple daisy-chain connections\u003c\/li\u003e\n\u003cli\u003e12-gauge 304 stainless steel blades with 5\/8\" flared trailing edge\u003c\/li\u003e\n\u003cli\u003e2.25\" stroke SD Pro actuators, 10\" pin-to-pin (15187-001)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Pro Control Auto Helm Keypad (15174-107)\u003c\/li\u003e\n\u003cli\u003e(1) Pro Control Auto IMU (15180-001)\u003c\/li\u003e\n\u003cli\u003e(2) 12-gauge 304 stainless steel standard mount blades, 9\" × 12\" with 1\/8\" hinge pin\u003c\/li\u003e\n\u003cli\u003e(2) 2.25\" Stroke SD Pro Actuators, 10\" pin-to-pin (15187-001)\u003c\/li\u003e\n\u003cli\u003e(6) Micro C Tee Connectors (30267-001)\u003c\/li\u003e\n\u003cli\u003e(1) Micro C Power Cable with fuse and ground (30281-001)\u003c\/li\u003e\n\u003cli\u003e(2) Micro C Drop Cables, 6 ft (30269-002)\u003c\/li\u003e\n\u003cli\u003e(1) Micro C Drop Cable, 15 ft (30269-001)\u003c\/li\u003e\n\u003cli\u003e(1) Micro C Drop Cable, 25 ft (30269-004)\u003c\/li\u003e\n\u003cli\u003e(2) 6-Pin Deutsch to Micro C Actuator Network Adapter Cables (30377-001)\u003c\/li\u003e\n\u003cli\u003e(2) Pro Control Actuator Power Pigtails, 3 ft (30378-001)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBlade Size Guide\u003c\/h3\u003e\u003cp\u003eThe 9\" × 12\" blade is the entry size in the Pro Control Auto lineup, best suited to hulls in the 17–22 ft range. For larger or heavier vessels, consider stepping up:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15184107-pro-control-auto-12v-trim-tab-system-12-x-12-standard-trim-tab-kit-complete\"\u003eLenco Pro Control Auto 12V Trim Tab System – 12\" × 12\" Standard Kit (15184-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lenco-15186107-pro-control-auto-12v-trim-tab-system-12-x-12-edge-mount-trim-tab-kit-complete\"\u003eLenco Pro Control Auto 12V Trim Tab System – 12\" × 12\" Edge Mount Kit (15186-107)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePrefer Manual Memory-Position Control?\u003c\/h3\u003e\u003cp\u003eIf you’d prefer to set and recall trim positions manually without auto-levelling, see the Assist series:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/lenco-15181106-pro-control-assist-12v-trim-tab-system-9x12-standard-kit\"\u003eLenco Pro Control Assist 12V Trim Tab System – 9\" × 12\" Standard Kit (15181-106)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAdd a Flybridge Station\u003c\/h3\u003e\u003cp\u003eExtend control to a second helm with the \u003ca href=\"\/products\/lenco-15176107-pro-control-auto-flybridge-keypad-kit\"\u003eLenco Pro Control Auto Flybridge Keypad Kit (15176-107)\u003c\/a\u003e, which includes the additional IMU required for a flybridge station.\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eParts Desk Insights\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBest Use Case:\u003c\/strong\u003e This is the right kit for a customer doing a full trim tab installation on a mid-size center console, cuddy cabin, or similar hull in the 17–22 ft range who wants fully automatic levelling without manual input. Everything needed for a complete single-station helm installation is included. This is the Auto-series equivalent of the \u003ca href=\"\/products\/lenco-15181106-pro-control-assist-12v-trim-tab-system-9x12-standard-kit\"\u003ePro Control Assist 9\" × 12\" Kit (15181-106)\u003c\/a\u003e — recommend the Auto when the customer prioritizes hands-free operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAuto vs. Assist:\u003c\/strong\u003e The Pro Control Auto uses an IMU to automatically level the boat in real time. The Pro Control Assist uses manual memory-position control. The Auto kit is priced higher but eliminates the need for the operator to monitor and adjust trim. For customers who prefer active control or are on a tighter budget, the \u003ca href=\"\/products\/lenco-15181106-pro-control-assist-12v-trim-tab-system-9x12-standard-kit\"\u003eAssist 9\" × 12\" Kit (15181-106)\u003c\/a\u003e is the alternative.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWake Signal Adapter:\u003c\/strong\u003e Unlike the Assist kit, this Auto kit does not include Wake Signal Adapters in the listed contents. Confirm with the customer whether their engine is Mercury or non-Mercury. If non-Mercury, a Wake Signal Adapter will be required for proper system operation and should be added to the order separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBlade Size Selection:\u003c\/strong\u003e The 9\" × 12\" blade is the entry size. For heavier or longer hulls (typically 22 ft and up), recommend the 12\" × 12\" standard or edge mount kits. Edge mount is preferred when transom space is limited or a lower actuator profile is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlybridge Upsell:\u003c\/strong\u003e If the customer has a dual-station vessel, the \u003ca href=\"\/products\/lenco-15176107-pro-control-auto-flybridge-keypad-kit\"\u003ePro Control Auto Flybridge Keypad Kit (15176-107)\u003c\/a\u003e adds a second keypad and the additional IMU needed for the flybridge station. It connects directly to the CAN bus network included in this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIMU Replacement:\u003c\/strong\u003e If the auto-levelling function fails after installation, the most common cause is a failed IMU. The replacement part is the \u003ca href=\"\/products\/lenco-pro-control-auto-replacement-imu-15180-001\"\u003eLenco Pro Control Auto Replacement IMU (15180-001)\u003c\/a\u003e.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51233043382308,"sku":"622-15182107","price":4156.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/622-15182107.jpg?v=1786152480","url":"https:\/\/marisolmarine.com\/products\/lenco-15182107-pro-control-auto-12v-trim-tab-system-9x12-standard-kit","provider":"Marisol Marine Company","version":"1.0","type":"link"}