{"product_id":"lenco-15185106-pro-control-assist-12v-trim-tab-system-12x12-edge-mount-kit","title":"Lenco Pro Control Assist 12V Trim Tab System – 12\" x 12\" Edge Mount Kit (15185-106)","description":"\u003ch2\u003eLenco Pro Control Assist 12V Trim Tab System – 12\" × 12\" Edge Mount Kit\u003c\/h2\u003e\u003cp\u003eGet the full performance of the Lenco Pro Control Assist trim tab system in a low-profile edge mount configuration. This complete 12\" × 12\" kit includes everything needed for a full installation — edge mount blades, actuators, controller keypad, and all required cabling — designed for vessels where transom space is limited or a lower actuator mounting height is preferred.\u003c\/p\u003e\u003cp\u003eUnlike standard mount trim tabs, edge mount blades position the actuator at the trailing edge of the blade rather than the transom face, resulting in a 3\" lower mounting height. The blades feature 1\" turned-up edges on all sides and a 5° taper toward the trailing edge for added strength and a clean, finished appearance.\u003c\/p\u003e\u003cp\u003eThe Pro Control Assist keypad delivers programmable memory position recall — dial in your preferred running angle and return to it instantly at the push of a button. Day and Night display modes and CAN bus communication keep the system intuitive and the wiring clean.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete system — edge mount blades, actuators, keypad, and all cabling included\u003c\/li\u003e\n\u003cli\u003eEdge mount design: 3\" lower actuator mounting height vs. standard mount\u003c\/li\u003e\n\u003cli\u003e1\" turned-up blade edges and 5° trailing edge taper for strength and style\u003c\/li\u003e\n\u003cli\u003eProgrammable memory position recall for repeatable trim settings\u003c\/li\u003e\n\u003cli\u003eDay and Night display modes for all-condition readability\u003c\/li\u003e\n\u003cli\u003eCAN bus architecture — clean, expandable wiring with simple daisy-chain connections\u003c\/li\u003e\n\u003cli\u003e12-gauge 304 stainless steel blades, 12\" × 12\"\u003c\/li\u003e\n\u003cli\u003e2.25\" stroke SD Pro actuators, 10\" pin-to-pin (15187-001)\u003c\/li\u003e\n\u003cli\u003eCompatible with Mercury and non-Mercury engine systems (Wake Signal Adapters included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Pro Control Assist Helm Keypad (15175-106)\u003c\/li\u003e\n\u003cli\u003e(2) 12-gauge 304 stainless steel edge mount blades, 12\" × 12\" with 1\" turned-up edges, 5° taper, and 1\/8\" hinge pin\u003c\/li\u003e\n\u003cli\u003e(2) 2.25\" Stroke SD Pro Actuators, 10\" pin-to-pin (15187-001)\u003c\/li\u003e\n\u003cli\u003e(5) Micro C Tee Connectors (30267-001)\u003c\/li\u003e\n\u003cli\u003e(1) Micro C Power Cable with fuse and ground (30281-001)\u003c\/li\u003e\n\u003cli\u003e(2) Micro C Drop Cables, 6 ft (30269-002)\u003c\/li\u003e\n\u003cli\u003e(1) Micro C Drop Cable, 25 ft (30269-004)\u003c\/li\u003e\n\u003cli\u003e(2) 6-Pin Deutsch to Micro C Actuator Network Adapter Cables (30377-001)\u003c\/li\u003e\n\u003cli\u003e(2) Pro Control Actuator Power Pigtails, 3 ft (30378-001)\u003c\/li\u003e\n\u003cli\u003e(2) Wake Signal Adapters for Non-Mercury Systems (30376-001)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEdge Mount vs. Standard Mount\u003c\/h3\u003e\u003cp\u003eEdge mount is the right choice when transom height is limited, when a cleaner low-profile look is desired, or when the standard mount actuator position would interfere with other transom hardware. If standard mount works for your installation, see:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/lenco-15183106-pro-control-assist-12v-trim-tab-system-12x12-standard-kit\"\u003eLenco Pro Control Assist 12V Trim Tab System – 12\" × 12\" Standard Kit (15183-106)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOther Blade Sizes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/products\/lenco-15181106-pro-control-assist-12v-trim-tab-system-9x12-standard-kit\"\u003eLenco Pro Control Assist 12V Trim Tab System – 9\" × 12\" Standard Kit (15181-106)\u003c\/a\u003e — for smaller hulls (17–22 ft)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePrefer Auto-Levelling?\u003c\/h3\u003e\u003cp\u003eIf you’d like the system to automatically level the boat without manual input, see the Pro Control Auto edge mount equivalent:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/lenco-15186107-pro-control-auto-12v-trim-tab-system-12-x-12-edge-mount-trim-tab-kit-complete\"\u003eLenco Pro Control Auto 12V Trim Tab System – 12\" × 12\" Edge Mount Kit (15186-107)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAdd a Flybridge Station\u003c\/h3\u003e\u003cp\u003eExtend control to a second helm with the \u003ca href=\"\/products\/lenco-15177106-pro-control-assist-flybridge-keypad-kit\"\u003eLenco Pro Control Assist Flybridge Keypad Kit (15177-106)\u003c\/a\u003e.\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eParts Desk Insights\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBest Use Case:\u003c\/strong\u003e This kit is the right choice for a customer installing trim tabs on a larger hull (22–28 ft) where the transom has limited vertical clearance, where other hardware occupies the standard mount zone, or where the customer prefers the lower-profile look of edge mount blades. The edge mount actuator position sits 3\" lower than standard mount on a 12\" blade, which can be the deciding factor on some hull designs. For customers without transom clearance constraints, the \u003ca href=\"\/products\/lenco-15183106-pro-control-assist-12v-trim-tab-system-12x12-standard-kit\"\u003ePro Control Assist 12\" × 12\" Standard Kit (15183-106)\u003c\/a\u003e is the simpler installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEdge Mount vs. Standard Mount:\u003c\/strong\u003e The primary difference is actuator position — edge mount places the actuator at the trailing edge of the blade (lower profile, more complex installation), while standard mount places it on the transom face (simpler, more common). Both use the same 12\" × 12\" blade footprint and the same Pro Control Assist controller and keypad. Installation complexity is slightly higher for edge mount; confirm the customer or their installer is comfortable with the process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssist vs. Auto:\u003c\/strong\u003e The Pro Control Assist uses manual memory-position control. If the customer wants the system to automatically level the boat based on real-time pitch and roll, direct them to the \u003ca href=\"\/products\/lenco-15186107-pro-control-auto-12v-trim-tab-system-12-x-12-edge-mount-trim-tab-kit-complete\"\u003ePro Control Auto 12\" × 12\" Edge Mount Kit (15186-107)\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNon-Mercury Engines:\u003c\/strong\u003e Two Wake Signal Adapters are included, covering both actuators. No additional adapter purchase is needed for non-Mercury installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlybridge Upsell:\u003c\/strong\u003e If the customer has a dual-station vessel, add the \u003ca href=\"\/products\/lenco-15177106-pro-control-assist-flybridge-keypad-kit\"\u003ePro Control Assist Flybridge Keypad Kit (15177-106)\u003c\/a\u003e. It connects directly to the CAN bus network included in this kit.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51233043644452,"sku":"622-15185106","price":3528.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/622-15185106.jpg?v=1786152483","url":"https:\/\/marisolmarine.com\/products\/lenco-15185106-pro-control-assist-12v-trim-tab-system-12x12-edge-mount-kit","provider":"Marisol Marine Company","version":"1.0","type":"link"}