{"product_id":"pss-1-3-4-shft-3-1-4tube-shft-seal-02-134-314","title":"PSS Shaft Seal - 1-3\/4\"SHFT 3-1\/4TUBE Shft Seal | 02-134-314","description":"\u003cp\u003e\u003cstrong\u003ePSS 02-134-314\u003c\/strong\u003e is a Type A mechanical shaft seal for a 1-3\/4\" shaft and a 3-1\/4\" to 3-3\/8\" stern tube. A rotating stainless-steel rotor runs against a stationary carbon stator, with the compressed bellows maintaining contact between the sealing faces. Two O-rings seal the rotor to the shaft.\u003c\/p\u003e\u003ch3\u003eSpecifications and Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShaft diameter: 1-3\/4\".\u003c\/li\u003e\n\u003cli\u003eStern-tube outside diameter: 3-1\/4\" to 3-3\/8\".\u003c\/li\u003e\n\u003cli\u003eUncompressed length: 9.2175\"; approximate bellows compression: 1\".\u003c\/li\u003e\n\u003cli\u003eRotor outside diameter: 3.75\"; bellows cuff length: 2\".\u003c\/li\u003e\n\u003cli\u003eBellows material: molded nitrile-PVC.\u003c\/li\u003e\n\u003cli\u003eOperating limits: 5°F to 225°F (-15°C to 107°C), 10 psi (0.68 bar), and 10,000 shaft rpm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and Service Notes\u003c\/h3\u003e\u003cp\u003eFor Type A PSS installations with the dimensions above. Water-feed or vent requirements depend on vessel speed and shaft-log configuration. Inspect the bellows regularly; PSS recommends replacement every six years. Use new set screws whenever the rotor is removed or repositioned.\u003c\/p\u003e\u003cp\u003eHave a qualified installer fit the seal with the boat out of the water. Use soap and water on the rotor O-rings, not oil, grease or silicone. At 12 knots or faster, provide the positive cooling-water feed required by PSS; otherwise follow the specified vent or feed arrangement. \u003ca href=\"https:\/\/www.shaftseal.com\/marine\/pss-installation-instructions.html\"\u003eReference\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eParts Desk Insight\u003c\/h3\u003e\u003cp\u003eMeasure the shaft and the outside of the stern tube separately, then check the available installation length. A matching shaft size alone does not identify the correct seal. Set bellows compression and arrange the vent or water supply according to the PSS instructions for the vessel.\u003c\/p\u003e\u003cp\u003eBrand: PSS\u003cbr\u003eManufacturer part number: 02-134-314\u003cbr\u003eSold as: Each\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.shaftseal.com\/marine\/pss-type-a-seal.html\"\u003eManufacturer Product Information\u003c\/a\u003e \u003ca href=\"https:\/\/www.shaftseal.com\/marine\/pss-installation-instructions.html\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"WEST","offers":[{"title":"Default Title","offer_id":68055824597028,"sku":"PSS-02-134-314","price":941.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/PSSSHAFTSEAL_49b28c7e-180a-4e70-84bb-6ca033240377.jpg?v=1794080490","url":"https:\/\/marisolmarine.com\/products\/pss-1-3-4-shft-3-1-4tube-shft-seal-02-134-314","provider":"Marisol Marine Company","version":"1.0","type":"link"}