{"product_id":"turning-point-express-mach3-propeller-14-25x23-3-blade-stainless-steel-rh","title":"Turning Point Express Mach3 Propeller 14.25x23 – 3-Blade Stainless Steel, RH Rotation","description":"\u003ch2\u003eHigh-Performance Stainless Steel Propeller – High-Pitch Option for 90–300+ hp Outboards \u0026amp; Sterndrives\u003c\/h2\u003e\n\u003cp\u003eThe Express Mach3 14.25x23 is a 3-blade stainless steel propeller engineered for boats running 90–300+ hp engines with 4.75\" gearcases. At 23\" pitch, it is the high-pitch option in the 14.25\" diameter Mach3 range — suited to boats that can carry the extra load and still reach the upper end of the engine’s WOT RPM range, delivering maximum top-end speed where conditions allow.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from proprietary TP17™ stainless steel — featuring 20% higher chromium content than standard alloys — it delivers exceptional corrosion resistance, a high-gloss finish, and nearly 250% greater strength than conventional stainless steel. Performance-tuned pitch angles, aggressive rake geometry, and large free-flowing exhaust ports (40% more exhaust area than typical competitors) work together to reduce backpressure, improve throttle response, and maximize top-end speed.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary TP17™ stainless steel — 20% more chromium, ~250% stronger, 5× more durable than standard stainless\u003c\/li\u003e\n\u003cli\u003ePerformance-tuned pitch, rake angles, and exhaust vents for all-around improvement\u003c\/li\u003e\n\u003cli\u003eLarge free-flowing exhaust ports — 40% more exhaust area for reduced backpressure and more power\u003c\/li\u003e\n\u003cli\u003eState-of-the-art casting technology with race-proven finish and tuning\u003c\/li\u003e\n\u003cli\u003eRight-hand (standard) rotation\u003c\/li\u003e\n\u003cli\u003e14.25\" diameter × 23\" pitch, 3-blade configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine Compatibility\u003c\/h3\u003e\n\u003cp\u003eFits a wide range of outboard and sterndrive applications including Cox®, Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, OXE®, Parsun®, Suzuki®, Tohatsu®, Volvo Penta®, and Yamaha® engines. Always verify fitment using the manufacturer’s application chart.\u003c\/p\u003e\n\n\u003ch3\u003eRequired Hub Kit\u003c\/h3\u003e\n\u003cp\u003eA hub\/installation kit is required and sold separately. Use a \u003ca href=\"\/products\/masterguard-hub-kit-500-500-series-4-25-4-75-gearcase-outboards-sterndrives\"\u003e500 Series Hub Kit\u003c\/a\u003e for engines under 200 hp, or the \u003ca href=\"\/products\/turning-point-propellers-masterguard-11701700-700-series-installation-hub-kit\"\u003e700 Series Hub Kit\u003c\/a\u003e for engines 200 hp and above. Refer to the application chart for the correct part number for your engine.\u003c\/p\u003e\n\n\u003ch3\u003eOther Pitches Available\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/turning-point-express-mach3-propeller-14-25x21-3-blade-stainless-steel-rh\"\u003eExpress Mach3 14.25x21 – RH Rotation\u003c\/a\u003e (one pitch step down)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turning-point-express-mach3-propeller-14-25x21-3-blade-stainless-steel-lh\"\u003eExpress Mach3 14.25x21 – LH Rotation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\u003ch3\u003eParts Desk Insights\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest Use Case:\u003c\/strong\u003e The 23\" pitch is the right recommendation for high-horsepower performance boats, bass boats, and offshore center consoles where the engine is under-propped on the 21\" pitch — meaning WOT RPM is consistently above the manufacturer’s recommended range. The extra 2\" of pitch will pull RPM down into the correct range and add top-end speed. Confirm WOT RPM with the customer before recommending this pitch — over-propping (RPM too low) causes premature engine wear and reduced performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePitch Selection Rule of Thumb:\u003c\/strong\u003e Each inch of pitch change moves WOT RPM by approximately 150–200 RPM. If a customer is running 200–400 RPM above the top of their WOT range on the 21\", the 23\" is the correct step up. If they’re already at the top of their range on the 21\", stay there. If they’re below range, step down to the \u003ca href=\"\/products\/turning-point-express-mach3-propeller-14-25x21-3-blade-stainless-steel-rh\"\u003e14.25x21\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHub Kit Note:\u003c\/strong\u003e Always confirm the hub kit part number from the application chart — the wrong kit is the most common installation error. The \u003ca href=\"\/products\/turning-point-propellers-11501700-masterguard-installation-model-517-series-500\"\u003eMasterGuard Model 517\u003c\/a\u003e is a common fit for many 500 Series applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgrade Path:\u003c\/strong\u003e Customers upgrading from aluminum should expect a noticeable improvement in durability and handling. Speed gains over aluminum are modest (typically 0.5–1 mph) — set expectations accordingly and focus the conversation on longevity and performance consistency.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51215130656804,"sku":"708-31502311","price":785.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/708-31501710_d984e64b-9377-4fe2-baa6-566e635640dc.jpg?v=1786150388","url":"https:\/\/marisolmarine.com\/products\/turning-point-express-mach3-propeller-14-25x23-3-blade-stainless-steel-rh","provider":"Marisol Marine Company","version":"1.0","type":"link"}