{"product_id":"volvo-366","title":"Volvo Penta IPS10-A Lower Gear Intermediate Housing Plate | 23366374","description":"\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 23366374\u003cbr\u003e\u003cstrong\u003eSuperseded By:\u003c\/strong\u003e 24456956 (current active OEM replacement)\u003cbr\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Volvo Penta\u003cbr\u003e\u003cstrong\u003eOfficial Product Type:\u003c\/strong\u003e Lower Gear Plate — IPS Intermediate Housing\u003c\/p\u003e\n\n\u003cp\u003eThe Volvo Penta 23366374 is a genuine OEM plate used in the IPS10-A lower gear intermediate housing assembly. It sits at diagram position 9 within the lower gear, alongside the intermediate housing, bearings, seals, gear segment, and water-inlet components. This plate is a precision-fit component — several similar plates are used in the same assembly, so matching the exact part number and diagram position is essential before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This part has been superseded by \u003cstrong\u003e24456956\u003c\/strong\u003e. Verify current availability and the applicable supersession with Volvo Penta parts before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo Penta IPS10-A — Lower Gear \/ Intermediate Housing assembly (confirmed, diagram position 9)\u003c\/li\u003e\n\u003cli\u003eConfirm against your exact drive serial number and the applicable Volvo Penta IPS10-A lower-gear diagram before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSerial Number \u0026amp; Fitment Notice\u003c\/h2\u003e\n\u003cp\u003eSeveral similar plates are used in the IPS10-A lower gear — including 22063724 at position 7 and 23683952 at position 16. Always match the part number and diagram position to your specific drive serial number before ordering. Do not substitute by appearance alone.\u003c\/p\u003e\n\n\u003ch2\u003eSystem \u0026amp; Diagram Position\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e IPS Lower Gear — Intermediate Housing\u003cbr\u003e\u003cstrong\u003eDiagram Position:\u003c\/strong\u003e Object 9 (IPS10-A Lower Gear schematic)\u003c\/p\u003e\n\n\u003ch2\u003eEngine \u0026amp; Drive Family\u003c\/h2\u003e\n\u003cp\u003eVolvo Penta IPS10-A pod drive. This plate is part of the lower gear intermediate housing assembly rather than the engine itself.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Replace\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCracking, distortion, or warping of the plate\u003c\/li\u003e\n\u003cli\u003eCorrosion or pitting on sealing or mating surfaces\u003c\/li\u003e\n\u003cli\u003eDamaged fastener locations or stripped threads\u003c\/li\u003e\n\u003cli\u003eWear at adjoining seal or housing surfaces discovered during inspection\u003c\/li\u003e\n\u003cli\u003eAny time the intermediate housing or lower gear is being fully disassembled for service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eService Interval\u003c\/h2\u003e\n\u003cp\u003eInspect during every lower gear or intermediate housing service. Replace immediately if damage or distortion is found. Proactive replacement during a full lower-gear overhaul is recommended — the labour cost to revisit this assembly far exceeds the cost of the plate.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm diagram position 9 against your drive serial number before installation\u003c\/li\u003e\n\u003cli\u003eDo not confuse with companion plates 22063724 (position 7) or 23683952 (position 16) — they are in the same assembly but are not interchangeable\u003c\/li\u003e\n\u003cli\u003eInspect all adjoining O-rings, gaskets, bearings, and sealing surfaces during installation and replace as needed\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to Volvo Penta specification for the IPS10-A lower gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePart Number \u0026amp; Supersession\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal OEM Part Number:\u003c\/strong\u003e 23366374\u003cbr\u003e\u003cstrong\u003eSuperseded By:\u003c\/strong\u003e 24456956 — verify current supersession status with Volvo Penta parts before ordering\u003c\/p\u003e\n\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cp\u003eSingle lower gear plate (23366374). No additional hardware included. O-rings, gasket, and fasteners are separate line items in the IPS10-A lower gear assembly.\u003c\/p\u003e\n\n\u003ch2\u003eRelated Parts — IPS10-A Lower Gear Assembly\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e23411046 — Intermediate housing\u003c\/li\u003e\n\u003cli\u003e184093 — Needle roller bushing\u003c\/li\u003e\n\u003cli\u003e3862569 — Guide sleeve\u003c\/li\u003e\n\u003cli\u003e955975 — O-ring\u003c\/li\u003e\n\u003cli\u003e184863 — Needle roller bearing\u003c\/li\u003e\n\u003cli\u003e21535352 — Lip seal\u003c\/li\u003e\n\u003cli\u003e22063724 — Companion plate (diagram position 7)\u003c\/li\u003e\n\u003cli\u003e984497 — Six-point socket screw\u003c\/li\u003e\n\u003cli\u003e925258 — O-ring\u003c\/li\u003e\n\u003cli\u003e23129533 — Gasket\u003c\/li\u003e\n\u003cli\u003e23411049 — Gear segment\u003c\/li\u003e\n\u003cli\u003e23683957 — Water inlet kit\u003c\/li\u003e\n\u003cli\u003e23683952 — Related plate (diagram position 16)\u003c\/li\u003e\n\u003cli\u003e24456956 — Current superseding plate (replaces 23366374)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDimensions \u0026amp; Weight\u003c\/h2\u003e\n\u003cp\u003eApproximate weight: 1.0 kg (2.2 lb) — best estimate based on available data. Confirm exact dimensions via the Volvo Penta IPS10-A lower gear schematic.\u003c\/p\u003e\n\n\u003ch2\u003eParts Desk Insights\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBest use case:\u003c\/strong\u003e Full lower gear or intermediate housing overhaul on the IPS10-A. This is the right time to replace the plate — once the housing is apart, the incremental cost of a new plate is minimal compared to the labour of a return visit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon customer issue:\u003c\/strong\u003e The IPS10-A lower gear uses multiple plates that look very similar. Customers occasionally order the wrong one by appearance. Always cross-reference diagram position 9 and part number 23366374 (or its supersession 24456956) against your drive serial number. If you are unsure which plate you need, pull the schematic for your specific serial-number range before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical FAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is 23366374 still available, or do I need to order 24456956?\u003c\/strong\u003e\u003cbr\u003eA: 23366374 has been superseded by 24456956. Confirm current availability and the correct ordering number with Volvo Penta parts for your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between 23366374, 22063724, and 23683952?\u003c\/strong\u003e\u003cbr\u003eA: All three are plates in the IPS10-A lower gear intermediate housing, but they occupy different diagram positions (9, 7, and 16 respectively) and are not interchangeable. Match the diagram position to your serial number to confirm which plate you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to replace the O-rings and gasket when I replace this plate?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Volvo Penta recommends replacing all adjoining seals, O-rings, and gaskets any time the intermediate housing is opened. Reusing old seals on a reassembled lower gear is a common cause of repeat service calls.\u003c\/p\u003e","brand":"VOL","offers":[{"title":"Default Title","offer_id":43563994447908,"sku":"23366374","price":549.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/images_bcaf8468-40d8-43d5-90d7-2baf059fed5f.jpg?v=1787535256","url":"https:\/\/marisolmarine.com\/products\/volvo-366","provider":"Marisol Marine Company","version":"1.0","type":"link"}