{"product_id":"volvo-penta-v-belt-9415","title":"Volvo Penta V-Belt 9415","description":"\u003cp\u003eThe Volvo Penta 9415 is an OEM-specification V-belt for the accessory drive system on Volvo Penta AQ and BB series gasoline marine engines. It is commonly used alongside the \u003ca href=\"\/products\/volvo-penta-v-belt-9319\"\u003eVolvo Penta V-Belt 9319\u003c\/a\u003e on dual-belt drive configurations, where each belt serves a separate accessory position — such as the alternator and the raw-water pump. Cross-reference: Volvo Penta part number 3851079.\u003c\/p\u003e\n\n\u003ch2\u003eApplication Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for Volvo Penta AQ and BB series gasoline marine engines that use a V-belt accessory drive. Engine model, serial-number range, and accessory package determine which belt positions are required and whether both the 9319 and 9415 are needed. Confirm the original part number against your engine's service documentation before ordering to ensure the correct cross-section and length for your specific drive configuration.\u003c\/p\u003e\n\n\u003ch2\u003eFitment Notice\u003c\/h2\u003e\n\u003cp\u003eDo not substitute by approximate length alone. Confirm the OEM part number, belt cross-section, and pulley groove profile before installation. Volvo Penta engine builds can vary by model year, horsepower rating, and accessory package. Using an incorrect belt width or length can result in slipping, premature wear, or accessory failure.\u003c\/p\u003e\n\n\u003ch2\u003eWhen This Part Needs Replacement\u003c\/h2\u003e\n\u003cp\u003eReplace the belt when it shows cracking, glazing, fraying, missing material, oil saturation, or persistent squealing under load. A belt that rides low in the pulley groove or requires repeated tension adjustment is likely worn and should be replaced before it causes charging or cooling problems on the water. On dual-belt drives, it is good practice to replace both belts at the same service interval even if only one shows visible wear.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eInspect all pulleys for wear, corrosion, misalignment, and contamination before fitting the replacement belt. Route the belt without forcing it over pulley flanges, then tension to the specification in your Volvo Penta engine service manual. Rotate the drive by hand to confirm correct seating and recheck tension after the initial run-in period. If the idler pulley shows wear or play, consider replacing the \u003ca href=\"\/products\/volvo-penta-idler-pulley-3860201\"\u003eVolvo Penta Idler Pulley 3860201\u003c\/a\u003e or \u003ca href=\"\/products\/volvo-penta-idler-pulley-3847482\"\u003eVolvo Penta Idler Pulley 3847482\u003c\/a\u003e at the same service interval.\u003c\/p\u003e\n\n\u003ch2\u003eAlternate Part Numbers\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolvo Penta OEM part number: \u003cstrong\u003e9415\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCross-reference: \u003cstrong\u003e3851079\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eParts Desk Insights\u003c\/h2\u003e\n\u003cp\u003eThe 9415 is best suited for Volvo Penta AQ and BB series engines running the original dual V-belt accessory drive. On these configurations, the 9415 and the \u003ca href=\"\/products\/volvo-penta-v-belt-9319\"\u003eVolvo Penta V-Belt 9319\u003c\/a\u003e work together — replacing both at the same time avoids a second service visit if the other belt fails shortly after. If you are unsure which belt your engine requires, cross-check the part number in your engine’s service manual or compare against the full range in our \u003ca href=\"\/collections\/volvo-penta-belts\"\u003eVolvo Penta Belts\u003c\/a\u003e collection. When servicing the drive, inspect the idler pulleys at the same time — a worn pulley accelerates belt wear and can cause misalignment. For the full range of Volvo Penta drive components, browse our \u003ca href=\"\/collections\/belts-hoses-clamps\"\u003eBelts, Hoses \u0026amp; Clamps\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"FVW","offers":[{"title":"Default Title","offer_id":43563794792484,"sku":"9415","price":42.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/images_362ba3d4-8fc0-4da9-b6e6-98d18cab8b13.jpg?v=1785443229","url":"https:\/\/marisolmarine.com\/products\/volvo-penta-v-belt-9415","provider":"Marisol Marine Company","version":"1.0","type":"link"}