{"product_id":"wix-oil-filter-51064-yanmar-baldwin-b227","title":"WIX Oil Filter 51064 – Yanmar Diesel (Replaces Baldwin B227)","description":"\u003ch2\u003eWIX Oil Filter 51064 – Yanmar Diesel (Replaces Baldwin B227)\u003c\/h2\u003e\u003cp\u003eThe WIX 51064 is a full-flow spin-on lubricating oil filter commonly used in Yanmar diesel engines and compatible industrial and marine applications. It provides reliable full-flow oil filtration to remove contaminants and protect internal engine components from wear. A well-regarded aftermarket alternative to Baldwin B227 and other OEM equivalents.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-flow spin-on engine oil filter\u003c\/li\u003e\n\u003cli\u003eEnhanced-cellulose filtration media\u003c\/li\u003e\n\u003cli\u003eNominal filtration rating: 21 microns\u003c\/li\u003e\n\u003cli\u003eThread size: M20 × 1.5\u003c\/li\u003e\n\u003cli\u003eHeight: approximately 2.99 in \/ 76 mm\u003c\/li\u003e\n\u003cli\u003eOutside diameter: approximately 3.23 in \/ 82 mm\u003c\/li\u003e\n\u003cli\u003eBypass-valve setting: 16 psi\u003c\/li\u003e\n\u003cli\u003eIntegrated anti-drainback valve\u003c\/li\u003e\n\u003cli\u003eAttached sealing gasket\u003c\/li\u003e\n\u003cli\u003eWIX Part Number: 51064\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEngine Compatibility\u003c\/h3\u003e\u003cp\u003eThe WIX 51064 is commonly associated with Yanmar compact diesel engines used in marine auxiliary systems, industrial equipment, generators, and compact machinery. Always confirm fitment against your engine model and serial number before ordering — Yanmar engines within the same series may use different filters depending on production year and equipment manufacturer configuration.\u003c\/p\u003e\u003ch3\u003eFitment Notice\u003c\/h3\u003e\u003cp\u003eConfirm the number printed on the existing filter or verify the engine model and serial number before ordering. Do not select this filter by thread size alone — the bypass-valve setting (16 psi on the 51064, higher than many common alternatives), gasket dimensions, and anti-drainback-valve configuration must also match your engine’s lubrication system.\u003c\/p\u003e\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\u003cp\u003eReplace the oil filter at every oil change or at the interval specified by Yanmar for your engine. Earlier replacement may be appropriate under heavy loads, extended low-speed operation, fuel or coolant contamination, long periods of seasonal storage, or following internal engine repairs. Replace immediately if the filter housing is dented, corroded, or leaking.\u003c\/p\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eRemove the old filter and confirm its sealing gasket has not remained on the mounting surface. Clean the filter head and lightly coat the new gasket with clean engine oil. Install by hand to the manufacturer’s tightening specification — do not overtighten. After installation: refill with the specified oil, start the engine and verify normal oil pressure, inspect for leakage, shut down and allow oil to settle, then recheck and correct the oil level.\u003c\/p\u003e\u003ch3\u003eCross-Reference Numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBaldwin B227\u003c\/li\u003e\n\u003cli\u003eNAPA Gold 1064\u003c\/li\u003e\n\u003cli\u003eFleetguard LF16050\u003c\/li\u003e\n\u003cli\u003eFRAM PH3593A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCross-reference numbers are comparison aids only. Confirm the original filter number and engine application before substituting brands.\u003c\/p\u003e\u003ch3\u003eOther WIX Filters\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wix-oil-filter-51358-yanmar\"\u003eWIX Oil Filter 51358 – Yanmar Marine Diesel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wix-oil-filter-51365-honda-tohatsu-yanmar\"\u003eWIX Oil Filter 51365 – Honda Marine, Tohatsu \u0026amp; Yanmar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wix-oil-filter-51083-mercury-mariner\"\u003eWIX Oil Filter 51083 – Mercury \u0026amp; Mariner Outboards\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wix-oil-filter-51515-ford\"\u003eWIX Oil Filter 51515 – Ford Marine\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wix-oil-filter-51806\"\u003eWIX Oil Filter 51806\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eParts Desk Insights\u003c\/h3\u003e\u003cp\u003eThe WIX 51064 is best used as a scheduled replacement filter during oil changes on compatible Yanmar diesel engines. Note that the bypass-valve setting on the 51064 is \u003cstrong\u003e16 psi\u003c\/strong\u003e — higher than the 8–11 psi setting found on many other common WIX filters. This matters: using a filter with the wrong bypass setting can affect lubrication during cold starts or when the filter media becomes loaded. Always match the existing filter number rather than substituting by thread size or appearance alone. The Baldwin B227 cross-reference is the most reliable confirmation of fitment for Yanmar applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e Ships same or next day for fast Canada-wide shipping. ⚓\u003c\/p\u003e","brand":"NSP","offers":[{"title":"Default Title","offer_id":43563952046116,"sku":"51064","price":22.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/7426463__15469.jpg?v=1773366726","url":"https:\/\/marisolmarine.com\/products\/wix-oil-filter-51064-yanmar-baldwin-b227","provider":"Marisol Marine Company","version":"1.0","type":"link"}