{"product_id":"xantrex-8061020-freedom-hf-inverter-charger-1000w-12v-20a","title":"Xantrex 8061020 Freedom HF Inverter\/Charger, 1000W, 12V, 20A","description":"\u003cp\u003eThe Xantrex Freedom HF 1000 combines a 1,000-watt modified sine wave inverter, a 20-amp three-stage battery charger and a 30-amp automatic AC transfer relay in one compact unit. Designed for nominal 12-volt electrical systems, it supplies 115-volt AC power from the battery bank and automatically switches to shore or generator power when an acceptable external AC source becomes available. Xantrex identifies the Freedom HF for boats, recreational vehicles, commercial trucks and specialty vehicles.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1,000 watts of continuous modified sine wave AC output\u003c\/li\u003e\n\u003cli\u003eUp to 2,000 watts of surge output for compatible startup loads\u003c\/li\u003e\n\u003cli\u003eIntegrated 20-amp battery charger\u003c\/li\u003e\n\u003cli\u003eBuilt-in 30-amp automatic transfer relay\u003c\/li\u003e\n\u003cli\u003eThree-stage battery charging\u003c\/li\u003e\n\u003cli\u003eSelectable flooded, AGM, gel and fixed 13.5-volt charging settings\u003c\/li\u003e\n\u003cli\u003eTemperature-sensitive charging control\u003c\/li\u003e\n\u003cli\u003eDual GFCI-protected AC receptacles\u003c\/li\u003e\n\u003cli\u003eSupports hardwired AC input and output installations\u003c\/li\u003e\n\u003cli\u003eQuick-connect AC terminals simplify installation\u003c\/li\u003e\n\u003cli\u003eIgnition-lockout capability helps prevent unwanted battery drain\u003c\/li\u003e\n\u003cli\u003eDetachable digital display can be mounted remotely\u003c\/li\u003e\n\u003cli\u003eAC and DC connections positioned on the same side of the enclosure\u003c\/li\u003e\n\u003cli\u003eBuilt-in overload, short-circuit, over-temperature and battery-voltage protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplication Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1000 is suitable for nominal 12-volt systems in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecreational and commercial boats\u003c\/li\u003e\n\u003cli\u003eMotorhomes and travel trailers\u003c\/li\u003e\n\u003cli\u003eHeavy-duty trucks\u003c\/li\u003e\n\u003cli\u003eCoaches and buses\u003c\/li\u003e\n\u003cli\u003eMobile service vehicles\u003c\/li\u003e\n\u003cli\u003eWork trucks\u003c\/li\u003e\n\u003cli\u003eSpecialty and emergency vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eXantrex lists compatible load examples including refrigerators, blenders, laptops and mobile-device chargers. Total continuous demand and appliance startup requirements must remain within the inverter’s ratings.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eElectrical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNominal DC input voltage: 12 volts\u003c\/li\u003e\n\u003cli\u003eDC operating range: 10.5–15.5 volts\u003c\/li\u003e\n\u003cli\u003eContinuous inverter output: 1,000 watts\u003c\/li\u003e\n\u003cli\u003eSurge output: 2,000 watts\u003c\/li\u003e\n\u003cli\u003eAC output voltage: 115 volts RMS, ±10 volts\u003c\/li\u003e\n\u003cli\u003eAC output frequency: 60 Hz\u003c\/li\u003e\n\u003cli\u003eOutput waveform: Modified sine wave\u003c\/li\u003e\n\u003cli\u003eFull-load efficiency: Greater than 80%\u003c\/li\u003e\n\u003cli\u003ePeak efficiency: Greater than 87%\u003c\/li\u003e\n\u003cli\u003eNo-load input power while producing AC: Less than 10 watts\u003c\/li\u003e\n\u003cli\u003eOff-mode current draw with display off: Less than 1 mA\u003c\/li\u003e\n\u003cli\u003eBattery-charger output: 20 amps\u003c\/li\u003e\n\u003cli\u003eSelectable charger-current settings: 2, 5, 10 or 20 amps\u003c\/li\u003e\n\u003cli\u003eAC charger input range: 90–130 volts\u003c\/li\u003e\n\u003cli\u003eMaximum AC input while charging: 5 amps\u003c\/li\u003e\n\u003cli\u003eAutomatic transfer-relay rating: 30 amps\u003c\/li\u003e\n\u003cli\u003eLow-battery cut-out range: 10.5–11.8 volts\u003c\/li\u003e\n\u003cli\u003eDefault bulk-charge voltage: 14.2 volts DC\u003c\/li\u003e\n\u003cli\u003eDefault float-charge voltage: 13.5 volts DC\u003c\/li\u003e\n\u003cli\u003eBattery-charge outputs: One\u003c\/li\u003e\n\u003cli\u003eCharge control: Three-stage\u003c\/li\u003e\n\u003cli\u003eEqualisation function: Not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBattery Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1000 includes selectable charging settings for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlooded lead-acid batteries\u003c\/li\u003e\n\u003cli\u003eAGM batteries\u003c\/li\u003e\n\u003cli\u003eGel batteries\u003c\/li\u003e\n\u003cli\u003eFixed 13.5-volt applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis model does not include a dedicated lithium charging profile. Battery voltage, charging requirements and battery-management-system compatibility must be confirmed before use with a lithium battery bank.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eDimensions and Weight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 4.2 inches \/ 106 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 9.5 inches \/ 241 mm\u003c\/li\u003e\n\u003cli\u003eLength: 15.5 inches \/ 393 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 10 lb \/ 4.5 kg\u003c\/li\u003e\n\u003cli\u003eRecommended operating-temperature range: 0°C to 40°C\u003c\/li\u003e\n\u003cli\u003eWarranty: Two years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eCertification and Marine Installation Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF is ETL certified to CSA C22.2 No. 107.1 and UL 458. Compliance with the UL 458 Marine Supplement requires Xantrex drip shield part number 808-1050.\u003c\/p\u003e\n\u003cp\u003eMarine installation must follow the Xantrex installation guide and applicable requirements for conductor sizing, battery overcurrent protection, grounding, AC wiring, ventilation and equipment location.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFitment Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1000 is designed for a nominal 12-volt battery bank and must not be connected to a 24-volt system.\u003c\/p\u003e\n\u003cp\u003eThis unit produces modified sine wave power rather than true sine wave power. Some variable-speed tools, electronically controlled appliances, small battery chargers, lighting equipment and sensitive electronics may not operate correctly and could be damaged. Confirm modified sine wave compatibility with the equipment manufacturer before connection.\u003c\/p\u003e\n\u003cp\u003eAt full output, the inverter can draw approximately 90 amps or more from the 12-volt battery bank after conversion losses are considered. Battery capacity, conductor size, cable length, terminal hardware, fuse rating and disconnect capacity must be selected for the actual installation.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhen This Product Needs Replacement\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInspect or replace the inverter\/charger if it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepeatedly shuts down under loads it previously supported\u003c\/li\u003e\n\u003cli\u003eFails to transfer correctly between external AC and inverter power\u003c\/li\u003e\n\u003cli\u003eNo longer charges a verified serviceable battery bank\u003c\/li\u003e\n\u003cli\u003eProduces recurring overload, low-voltage or over-temperature faults\u003c\/li\u003e\n\u003cli\u003eHas damaged AC receptacles, DC terminals or communication connections\u003c\/li\u003e\n\u003cli\u003eShows evidence of overheating, moisture intrusion or internal corrosion\u003c\/li\u003e\n\u003cli\u003eHas an unreadable or unresponsive display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore replacing the unit, test the battery bank, incoming AC supply, DC cable voltage drop, external fuses, circuit breakers and terminal connections. Weak batteries or undersized conductors can produce symptoms similar to inverter failure.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInstall the Freedom HF in a dry, ventilated location protected from water, battery gases, excessive heat and fuel vapours. Use correctly sized marine-grade DC conductors, properly rated overcurrent protection and an accessible battery disconnect.\u003c\/p\u003e\n\u003cp\u003eThe unit may supply loads through its dual GFCI receptacle or be integrated into a hardwired AC system. Follow the Xantrex installation guide for mounting orientation, AC input and output wiring, chassis grounding, battery protection and ventilation clearance.\u003c\/p\u003e\n\u003cp\u003eThe detachable display can be moved to a more accessible location using a compatible communication cable. Install marine drip shield 808-1050 when required for UL 458 Marine Supplement compliance.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatible Accessories\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXantrex Freedom HF Remote Control Panel – 808-1840\u003c\/li\u003e\n\u003cli\u003eXantrex 25-foot six-conductor remote cable – 31-6257-00\u003c\/li\u003e\n\u003cli\u003eXantrex 50-foot six-conductor remote cable – 31-6262-00\u003c\/li\u003e\n\u003cli\u003eXantrex Marine Drip Shield – 808-1050\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eAlternate Part Numbers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXantrex manufacturer part number: 806-1020\u003c\/li\u003e\n\u003cli\u003eUnhyphenated catalogue reference: 8061020\u003c\/li\u003e\n\u003cli\u003eDistributor catalogue reference: 262-8061020\u003c\/li\u003e\n\u003cli\u003eProduct model: Freedom HF 1000\u003c\/li\u003e\n\u003cli\u003eUPC: 715535890414\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eParts Desk Insight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1000 is a compact all-in-one choice for smaller 12-volt systems that need moderate AC power, automatic shore-power transfer and basic battery charging. It should not be confused with the Freedom HF 1055: both models provide 1,000 watts of inverter output, but the 806-1020 includes a 20-amp charger while the 806-1055 provides a 55-amp charger. Customers needing more inverter output may consider the \u003ca href=\"\/products\/xantrex-8061840-freedom-hf-inverter-charger-1800w-12v\"\u003eFreedom HF 1800 – 806-1840\u003c\/a\u003e.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51156151894052,"sku":"262-8061020","price":1188.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/f3853174-c5d6-47d3-8deb-4f1711dca0e2.png?v=1785028070","url":"https:\/\/marisolmarine.com\/products\/xantrex-8061020-freedom-hf-inverter-charger-1000w-12v-20a","provider":"Marisol Marine Company","version":"1.0","type":"link"}