{"product_id":"xantrex-8061220-prowatt-sw-2000-pure-sine-wave-inverter-1800w-12v","title":"Xantrex 8061220 PROwatt SW 2000 Pure Sine Wave Inverter, 1800W, 12V","description":"\u003cp\u003eThe Xantrex PROwatt SW 2000 is a compact 12-volt pure sine wave inverter designed to operate household appliances, electronics and motor-driven equipment from a battery bank. Although sold as the PROwatt SW 2000, Xantrex rates this model for 1,800 watts of continuous AC output and up to 3,000 watts of peak surge capacity. It is suitable for marine vessels, recreational vehicles, commercial trucks, service vehicles and other mobile power applications requiring clean 120-volt AC power.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClean true sine wave output for sensitive electronics and motor loads\u003c\/li\u003e\n\u003cli\u003e1,800 watts of continuous AC output\u003c\/li\u003e\n\u003cli\u003e3,000-watt peak surge capacity for demanding startup loads\u003c\/li\u003e\n\u003cli\u003eOperates from a nominal 12-volt DC battery bank\u003c\/li\u003e\n\u003cli\u003eDual GFCI-protected 120-volt AC receptacles\u003c\/li\u003e\n\u003cli\u003eBuilt-in USB Type-A charging port\u003c\/li\u003e\n\u003cli\u003eDigital display shows battery voltage, AC output power and fault codes\u003c\/li\u003e\n\u003cli\u003eOptional remote-panel connection\u003c\/li\u003e\n\u003cli\u003eIgnition-control capability when used with the optional remote\u003c\/li\u003e\n\u003cli\u003eHardwired DC battery connection\u003c\/li\u003e\n\u003cli\u003eCompact design for marine, RV and commercial-vehicle installations\u003c\/li\u003e\n\u003cli\u003eTwo-year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSuitable Loads\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe PROwatt SW 2000 can operate appropriately sized equipment such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRefrigerators\u003c\/li\u003e\n\u003cli\u003eMicrowave ovens\u003c\/li\u003e\n\u003cli\u003eCoffee makers\u003c\/li\u003e\n\u003cli\u003eTelevisions\u003c\/li\u003e\n\u003cli\u003eComputers and laptops\u003c\/li\u003e\n\u003cli\u003eBattery chargers\u003c\/li\u003e\n\u003cli\u003eSmall kitchen appliances\u003c\/li\u003e\n\u003cli\u003eVariable-speed power tools\u003c\/li\u003e\n\u003cli\u003eMobile electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe combined continuous load must remain within the inverter’s 1,800-watt rating. Appliances with compressors, motors or heating elements must also remain within its 3,000-watt startup-surge capacity.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eElectrical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct series: PROwatt SW\u003c\/li\u003e\n\u003cli\u003eNominal DC input: 12 volts\u003c\/li\u003e\n\u003cli\u003eDC input operating range: 10.5–15.5 volts\u003c\/li\u003e\n\u003cli\u003eContinuous AC output: 1,800 watts\u003c\/li\u003e\n\u003cli\u003ePeak surge capacity: 3,000 watts\u003c\/li\u003e\n\u003cli\u003eAC output voltage range: 104–127 volts\u003c\/li\u003e\n\u003cli\u003eAC output frequency: 60 Hz ±0.5 Hz\u003c\/li\u003e\n\u003cli\u003eOutput waveform: True sine wave\u003c\/li\u003e\n\u003cli\u003eOptimum efficiency: 90%\u003c\/li\u003e\n\u003cli\u003eNo-load current draw: Less than 0.6 amps\u003c\/li\u003e\n\u003cli\u003eUSB output: 5 volts, 500 mA\u003c\/li\u003e\n\u003cli\u003eAC receptacles: Dual GFCI\u003c\/li\u003e\n\u003cli\u003eUSB receptacle: Single Type-A port\u003c\/li\u003e\n\u003cli\u003eDC connection: Hardwired\u003c\/li\u003e\n\u003cli\u003eRecommended DC fuse: 250 amps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eDimensions and Weight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 3.9 inches \/ 100 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 11.8 inches \/ 299 mm\u003c\/li\u003e\n\u003cli\u003eLength: 13.7 inches \/ 348 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 10.7 lb \/ 4.9 kg\u003c\/li\u003e\n\u003cli\u003eOperating-temperature range: 0°C to 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUL 458\u003c\/li\u003e\n\u003cli\u003eUL 458 Marine Supplement\u003c\/li\u003e\n\u003cli\u003eCSA 107.1\u003c\/li\u003e\n\u003cli\u003eFCC Part 15, Class A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFitment Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe PROwatt SW 2000 is designed for a nominal 12-volt battery bank and must not be connected to a 24-volt system. Confirm the voltage and wattage requirements of all connected appliances before ordering.\u003c\/p\u003e\n\u003cp\u003eAt full output, this inverter can draw approximately 170 amps or more from a 12-volt battery bank after inverter losses are considered. Battery capacity, conductor size, cable length, terminal hardware, disconnect rating and overcurrent protection must be selected for the actual installation.\u003c\/p\u003e\n\u003cp\u003eThis is an inverter only. It does not contain a battery charger or automatic shore-power transfer switch.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInstall the inverter in a dry, well-ventilated location protected from water, battery gases, excessive heat and fuel vapours. Keep the DC battery cables as short as practical and use properly sized marine-grade conductors.\u003c\/p\u003e\n\u003cp\u003eXantrex recommends a 250-amp DC fuse. The final fuse type, conductor size and disconnect arrangement must follow the installation manual and applicable marine or vehicle electrical standards.\u003c\/p\u003e\n\u003cp\u003eThe inverter’s AC loads can be connected directly to its GFCI receptacles. Installations requiring automatic transfer between inverter power and shore or generator power require the optional PROwatt SW Inline Transfer Relay or another correctly rated transfer system.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eOptional Accessories\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXantrex PROwatt SW Remote Panel\u003c\/li\u003e\n\u003cli\u003eXantrex PROwatt SW Inline Transfer Relay\u003c\/li\u003e\n\u003cli\u003eXantrex 50-foot remote cable – 31-6262-00\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe optional remote panel allows the inverter to be operated from another location and supports ignition-controlled shutdown in compatible vehicle installations.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhen This Product Needs Replacement\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInspect or replace the inverter if it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepeatedly shuts down under loads it previously operated\u003c\/li\u003e\n\u003cli\u003eNo longer produces stable AC output\u003c\/li\u003e\n\u003cli\u003eDisplays recurring low-voltage, overload or over-temperature faults\u003c\/li\u003e\n\u003cli\u003eHas damaged GFCI receptacles or DC terminals\u003c\/li\u003e\n\u003cli\u003eShows signs of overheating, moisture intrusion or internal corrosion\u003c\/li\u003e\n\u003cli\u003eProduces unusual noise or odour during operation\u003c\/li\u003e\n\u003cli\u003eFails after the battery bank and external wiring have been verified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore replacing the inverter, test the batteries under load and inspect the DC fuse, disconnect, cable terminals and voltage drop. Weak batteries or undersized conductors can create symptoms similar to inverter failure.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAlternate Part Numbers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXantrex manufacturer part number: 806-1220\u003c\/li\u003e\n\u003cli\u003eUnhyphenated part number: 8061220\u003c\/li\u003e\n\u003cli\u003eDistributor SKU: 262-8061220\u003c\/li\u003e\n\u003cli\u003eUPC: 715535894221\u003c\/li\u003e\n\u003cli\u003eModel name: PROwatt SW 2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eParts Desk Insight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe PROwatt SW 2000 is labelled as a 2,000-watt-class inverter, but the current official Xantrex specification lists 1,800 watts of continuous output and 3,000 watts of peak surge capacity. Customers requiring a full 2,000 watts continuously should size the inverter according to the official continuous rating rather than the model name.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51156151926820,"sku":"262-8061220","price":1152.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/2a3660d6-59a3-4d74-8e51-a9aa7b318a6c.png?v=1785027618","url":"https:\/\/marisolmarine.com\/products\/xantrex-8061220-prowatt-sw-2000-pure-sine-wave-inverter-1800w-12v","provider":"Marisol Marine Company","version":"1.0","type":"link"}