{"product_id":"xantrex-8061840-freedom-hf-inverter-charger-1800w-12v","title":"Xantrex 8061840 Freedom HF Inverter\/Charger, 1800W, 12V","description":"\u003cp\u003eThe Xantrex Freedom HF 1800 combines a 1,800-watt modified sine wave inverter, a 40-amp three-stage battery charger and a 30-amp automatic AC transfer relay in one compact 12-volt unit. Designed for boats, recreational vehicles, commercial trucks and specialty vehicles, it supplies onboard 115-volt AC power from the battery bank and automatically switches to shore or generator power when an approved AC source becomes available.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduces 1,800 watts of continuous modified sine wave AC power\u003c\/li\u003e\n\u003cli\u003eDelivers up to 3,600 watts of surge power for compatible startup loads\u003c\/li\u003e\n\u003cli\u003eIntegrated 40-amp three-stage battery charger\u003c\/li\u003e\n\u003cli\u003eBuilt-in 30-amp automatic AC transfer relay\u003c\/li\u003e\n\u003cli\u003eSupports flooded, gel and AGM battery charging profiles\u003c\/li\u003e\n\u003cli\u003eIncludes a fixed 13.5-volt charging mode for supported applications\u003c\/li\u003e\n\u003cli\u003eInternal temperature-sensitive charging adjusts output as operating temperature changes\u003c\/li\u003e\n\u003cli\u003eQuick-connect AC input and output terminals simplify hardwired installation\u003c\/li\u003e\n\u003cli\u003eIgnition-lockout capability can disable inverter operation when the vehicle ignition is off\u003c\/li\u003e\n\u003cli\u003eDetachable digital display can be remotely mounted using an optional communication cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eApplication Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1800 is intended for nominal 12-volt electrical systems in:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecreational and commercial boats\u003c\/li\u003e\n\u003cli\u003eMotorhomes and travel trailers\u003c\/li\u003e\n\u003cli\u003eHeavy-duty trucks\u003c\/li\u003e\n\u003cli\u003eCoaches and buses\u003c\/li\u003e\n\u003cli\u003eMobile service and work vehicles\u003c\/li\u003e\n\u003cli\u003eSpecialty and emergency vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eXantrex identifies the 1,800-watt model for compatible loads such as refrigerators, microwave ovens, blenders, laptops, televisions and mobile-device chargers. Total continuous load and appliance startup demand must remain within the inverter's ratings.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eElectrical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNominal DC input voltage: 12 volts\u003c\/li\u003e\n\u003cli\u003eDC operating range: 10.5–15.5 volts\u003c\/li\u003e\n\u003cli\u003eContinuous inverter output: 1,800 watts\u003c\/li\u003e\n\u003cli\u003eSurge output: 3,600 watts\u003c\/li\u003e\n\u003cli\u003eAC output voltage: 115 volts RMS, ±10 volts\u003c\/li\u003e\n\u003cli\u003eOutput frequency: 60 Hz\u003c\/li\u003e\n\u003cli\u003eOutput waveform: Modified sine wave\u003c\/li\u003e\n\u003cli\u003eFull-load efficiency: Greater than 80%\u003c\/li\u003e\n\u003cli\u003ePeak efficiency: Greater than 87%\u003c\/li\u003e\n\u003cli\u003eNo-load input power while producing AC: Less than 10 watts\u003c\/li\u003e\n\u003cli\u003eOff-mode current draw with display off: Less than 1 mA\u003c\/li\u003e\n\u003cli\u003eBattery-charger output: 40 amps\u003c\/li\u003e\n\u003cli\u003eAC input range: 90–130 volts\u003c\/li\u003e\n\u003cli\u003eMaximum charging AC input: 7.5 amps\u003c\/li\u003e\n\u003cli\u003eAutomatic transfer-relay rating: 30 amps\u003c\/li\u003e\n\u003cli\u003eDefault bulk-charge voltage: 14.2 volts DC\u003c\/li\u003e\n\u003cli\u003eDefault float-charge voltage: 13.5 volts DC\u003c\/li\u003e\n\u003cli\u003eBattery-charge outputs: One\u003c\/li\u003e\n\u003cli\u003eCharge control: Three-stage\u003c\/li\u003e\n\u003cli\u003eEqualisation function: Not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBattery Compatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSelectable charging profiles support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlooded lead-acid batteries\u003c\/li\u003e\n\u003cli\u003eAGM batteries\u003c\/li\u003e\n\u003cli\u003eGel batteries\u003c\/li\u003e\n\u003cli\u003eFixed 13.5-volt applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis model does not provide a dedicated lithium charging profile. Battery type, charging-voltage requirements and battery-management-system compatibility must be confirmed before use with any lithium battery installation.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eDimensions and Weight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeight: 4.2 inches \/ 106 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 9.5 inches \/ 241 mm\u003c\/li\u003e\n\u003cli\u003eLength: 18.5 inches \/ 470 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12.8 lb \/ 5.8 kg\u003c\/li\u003e\n\u003cli\u003eRecommended operating-temperature range: 0°C to 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eCertification and Marine Installation Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1800 is ETL certified to CSA C22.2 No. 107.1 and UL 458. Marine Supplement compliance requires Xantrex drip shield part number 808-1050.\u003c\/p\u003e\n\u003cp\u003eMarine installations must follow the current Xantrex installation instructions and applicable ABYC requirements for battery protection, conductor sizing, grounding, AC wiring, equipment location and ignition protection.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFitment Notice\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eConfirm that the installation uses a nominal 12-volt battery bank. The Freedom HF 1800 is not compatible with a 24-volt battery system.\u003c\/p\u003e\n\u003cp\u003eThis model produces modified sine wave power rather than true sine wave power. Verify that each connected appliance is approved for modified sine wave operation. Certain variable-speed motors, sensitive electronics, timing circuits, medical equipment and electronically controlled appliances may require a true sine wave inverter.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhen This Product Needs Replacement\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInspect or replace the inverter\/charger if it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRepeatedly shuts down under loads it previously supported\u003c\/li\u003e\n\u003cli\u003eNo longer switches correctly between external AC and inverter operation\u003c\/li\u003e\n\u003cli\u003eFails to charge a verified serviceable battery bank\u003c\/li\u003e\n\u003cli\u003eProduces recurring overload, low-voltage or over-temperature faults\u003c\/li\u003e\n\u003cli\u003eHas damaged AC or DC terminals\u003c\/li\u003e\n\u003cli\u003eShows evidence of moisture intrusion, overheating or internal corrosion\u003c\/li\u003e\n\u003cli\u003eHas an unreadable or non-responsive display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore replacing the unit, test the battery bank, incoming AC supply, DC cable voltage drop, fuses, circuit breakers and terminal connections. Weak batteries and undersized or loose conductors can cause symptoms similar to inverter failure.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInstall the Freedom HF in a dry, ventilated location protected from water, battery gases, excessive heat and fuel vapours. Use marine-grade DC conductors, correctly rated overcurrent protection and an accessible battery disconnect.\u003c\/p\u003e\n\u003cp\u003eKeep battery cables as short as practical and size them for the inverter's full DC demand and installation length. Follow the Xantrex installation guide for mounting orientation, ventilation clearance, chassis grounding and AC input and output wiring.\u003c\/p\u003e\n\u003cp\u003eInstall drip shield 808-1050 when required for UL 458 Marine Supplement compliance.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatible Accessories\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXantrex Freedom HF 1800 Replacement Remote Panel – 808-1840\u003c\/li\u003e\n\u003cli\u003eXantrex 25-foot six-conductor remote cable – 31-6257-00\u003c\/li\u003e\n\u003cli\u003eXantrex 50-foot six-conductor remote cable – 31-6262-00\u003c\/li\u003e\n\u003cli\u003eXantrex Marine Drip Shield – 808-1050\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eAlternate Part Numbers\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXantrex manufacturer part number: 806-1840\u003c\/li\u003e\n\u003cli\u003eUnhyphenated catalogue reference: 8061840\u003c\/li\u003e\n\u003cli\u003eDistributor catalogue reference: 262-8061840\u003c\/li\u003e\n\u003cli\u003eProduct model: Freedom HF 1800\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRelated Freedom HF 1800 variants may carry suffixes such as 806-1840-01, 806-1840-02, 806-1840-03, 806-1840-04 or 806-1840-05. These versions may differ in output connections, transfer functions or application-specific configuration and should not be assumed interchangeable.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eParts Desk Insight\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Freedom HF 1800 is a compact combined power solution for installations that need moderate AC output and a built-in charger. Because it produces modified sine wave power, customers operating sensitive electronics or equipment specifically requiring utility-grade AC should compare it with a true sine wave Freedom X, Freedom XC or Freedom SW model before ordering.\u003c\/p\u003e","brand":"LNS","offers":[{"title":"Default Title","offer_id":51156151959588,"sku":"262-8061840","price":1568.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/5799\/7604\/files\/88f34634-2e97-444a-af6d-ca697294f631.png?v=1785021653","url":"https:\/\/marisolmarine.com\/products\/xantrex-8061840-freedom-hf-inverter-charger-1800w-12v","provider":"Marisol Marine Company","version":"1.0","type":"link"}