Lewmar Anchor Rode – 1/2" x 200' Nylon with 1/4" x 15' Chain

Lewmar Windlass-Ready Anchor Rode – 1/2" x 200' Nylon with 1/4" x 15' Galvanized Chain

Built specifically for Lewmar V-Series and Pro-Series windlasses, this pre-spliced anchor rode gives you 200 feet of reach and a 15-foot galvanized chain lead — a step up in both scope and chain length from the standard 150' configuration. The combination of ACCO hi-test hot-dipped galvanized chain and chemically treated 3-strand nylon twist rope is engineered to feed cleanly through Lewmar gypsies and hold up to years of saltwater and UV exposure.

Key Features

• Windlass-optimized design — engineered specifically for Lewmar V-Series and Pro-Series windlass compatibility
• ACCO hi-test, hot-dipped galvanized chain — superior corrosion resistance and strength at the anchor end
• 3-strand nylon twist rope, 1/2" x 200' — chemically treated to stay flexible after prolonged saltwater and UV exposure
• Tapered rope-to-chain splice — smooth, snag-free transition through the windlass gypsy
• 1/4" x 15' chain section — longer chain lead adds more catenary weight for improved holding and better anchor set

Best Use Case

The ideal choice for powerboats and sailboats in the 28–45 ft range equipped with a Lewmar V700, Lewmar V4, or other Lewmar V-Series or Pro-Series windlass. The 200' scope supports anchoring in depths up to 33 feet at a 6:1 scope ratio, making it well-suited for coastal cruising, overnight anchoring in open roadsteads, and areas with tidal variation. The 15' chain section provides more catenary weight than the standard 10' configuration, improving holding in wind and current without requiring a longer all-chain rode.

Parts Desk Insights

• This rode is sized and spliced specifically for Lewmar windlass gypsies — using it with a non-Lewmar windlass may result in poor chain feeding or gypsy damage. Confirm your windlass model before purchasing.
• The 15' chain section is a meaningful upgrade over a 10' chain — the extra length improves the angle of pull on the anchor and adds holding power in current. For heavy-weather or deep-water anchoring, a 25–50' chain section is still preferred.
• 3-strand nylon stretches under load, absorbing shock from wave action and wind gusts. This protects both the windlass and the anchor cleat — a key advantage over braided rope for anchoring applications.
• Inspect the rope-to-chain splice annually for chafe and corrosion. The splice junction is the highest-wear point on any pre-spliced rode and should be replaced if fraying or rust staining is visible.
• Pair with a Lewmar replacement gypsy if your windlass shows signs of chain skipping — a worn gypsy is the most common cause of rode feeding issues.