Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Fasteners & Mounting

Marine Hardware & Installation

Marine Fasteners, Mounting Hardware & Installation Supplies

Shop marine-grade screws, bolts, nuts, washers, brackets, backing plates, rivets, mounting pads, sealants, thread lockers, and anti-seize for secure hardware installations in saltwater environments.

Shop Fasteners & Mounting Stainless Screws Mounting Brackets
Install Check

Match metal grade, fastener size, thread type, backing support, bedding compound, and load direction before drilling into the boat.

Shop Backing Plates

Use marine-grade hardware and proper sealing practices. Confirm load ratings, material compatibility, corrosion risk, deck core protection, and manufacturer instructions before installation.

Quick ShopFitmentHardware TypesInstall NotesInspectionFAQDeck HardwareTools

Fitment

Choose the Right Metal, Size, and Support

Marine fasteners need to match the job. Consider stainless grade, length, diameter, head style, thread type, washer size, backing plate needs, and whether the hardware is loaded in pull, shear, or vibration.

316 Stainless 304 Stainless Threaded Rod

Corrosion

Saltwater Hardware Needs Material Discipline

316 stainless is commonly preferred for saltwater exposure, while 304 stainless may suit freshwater or less demanding areas. Isolate dissimilar metals where needed and use anti-seize on stainless threads to reduce galling.

If a fastener is structural or safety-critical, confirm the correct grade, torque, backing, and installation method.

SS

Stainless Fasteners

Screws, bolts, nuts, washers, threaded rod, lock nuts, and specialty head styles for marine repair and upgrades.

MNT

Mounting Hardware

Brackets, bases, pads, backing plates, antenna mounts, rod holder mounts, and accessory supports.

BED

Bedding & Bonding

Sealants, adhesives, thread lockers, anti-seize, and bedding compounds help hardware stay secure and watertight.

Install Notes

Seal Holes and Spread Loads

Fastener selection is only part of the job. Hardware installed through decks, cabins, rails, transoms, or cored panels needs the right pilot hole, sealant, backing, washer, and torque.

Pilot holesUse the correct drill size for the fastener, substrate, and thread engagement.
Bedding compoundSeal penetrations to keep water out of cores, cabins, lockers, and electronics areas.
Backing platesSpread loads for cleats, davits, ladders, rails, seats, and high-load deck hardware.
Thread careUse thread locker or anti-seize where appropriate, especially on stainless-to-stainless threads.

Inspection

Replace Corroded, Loose, or Mismatched Hardware

Check for rust streaks, loose brackets, elongated holes, cracked sealant, missing washers, galvanic corrosion, stripped threads, and water intrusion around mounted hardware.

Washers Nuts Adhesives

Projects

Good Hardware Makes Upgrades Last

Electronics, antennas, cleats, rod holders, seats, speakers, lights, ladders, hatches, and deck fittings all rely on correctly chosen mounting hardware.

For heavy or safety-related gear, do a dry fit, mark hole locations carefully, and confirm access to the backside before drilling.

FAQ

Marine Fastener Questions

Should I use 304 or 316 stainless fasteners on a boat?

316 stainless is usually preferred for saltwater and exposed marine use because it has stronger corrosion resistance. 304 stainless can be suitable for freshwater or less exposed applications.

Why do stainless fasteners seize or gall?

Stainless threads can gall when tightened under friction, especially stainless-on-stainless. Anti-seize, correct thread engagement, and careful tightening can help reduce the risk.

When do I need a backing plate?

Use backing plates when hardware carries significant load, such as cleats, rails, ladders, davits, seats, and deck fittings. Backing plates spread load and help prevent crushing or pull-through.

Should deck fasteners be sealed?

Yes. Holes through decks, cabins, and cored panels should be sealed with the correct marine bedding compound to help prevent leaks and core damage.

Ready for a Stronger Install?

Shop Marine Fasteners, Brackets, Backing Plates & Sealants

Search by fastener type, material, size, head style, mounting application, sealant need, bracket type, or installation project.

Shop Fasteners & Mounting Backing Plates Sealants

Filters

Stainless Fender Washer 5/16", .078" Thick, OD 1-1/2

Stainless Fender Washer 5/16", .078" Thick, OD 1-1/2

$57.29 - $57.29
$57.29
$57.29 - $57.29
$57.29
Item locally warehoused

A durable 18-8 stainless steel fender washer sized for 5/16" hardware. Designed to spread load and help protect mounting surfaces. Key Features 18...

View full details
$57.29 - $57.29
$57.29
$57.29 - $57.29
$57.29
Flat Washer, 5/16", .062" Thick, OD 9/16" (A/N Style)

Flat Washer, 5/16", .062" Thick, OD 9/16" (A/N Style)

$16.39 - $16.39
$16.39
$16.39 - $16.39
$16.39
Item locally warehoused

Flat Washer (A/N Style) designed for 5/16 in. hardware. Built from 18-8 stainless steel for corrosion resistance in marine and general hardware app...

View full details
$16.39 - $16.39
$16.39
$16.39 - $16.39
$16.39
Stainless Fender Washer 1/4", .062" Thick, OD 1-1/2

Stainless Fender Washer 1/4", .062" Thick, OD 1-1/2

$200.49 - $200.49
$200.49
$200.49 - $200.49
$200.49
Item locally warehoused

Stainless fender washer sized for 1/4" hardware, built with 18-8 stainless steel for corrosion resistance. Designed with a larger outside diameter ...

View full details
$200.49 - $200.49
$200.49
$200.49 - $200.49
$200.49
Stainless Fender Washer 1/4", .062" Thick1/4", OD1-1/4"

Stainless Fender Washer 1/4", .062" Thick1/4", OD1-1/4"

$111.79 - $111.79
$111.79
$111.79 - $111.79
$111.79
Item locally warehoused

A marine-grade stainless fender washer designed to spread load and help protect mounting surfaces. Built for corrosion resistance, it’s sized for 1...

View full details
$111.79 - $111.79
$111.79
$111.79 - $111.79
$111.79
Flat Washer, 1/4", .050" Thick, OD 1/2" (A/N Style)

Flat Washer, 1/4", .050" Thick, OD 1/2" (A/N Style)

$14.09 - $14.09
$14.09
$14.09 - $14.09
$14.09
Item locally warehoused

Use this 1/4" flat washer to help distribute clamping load and protect mating surfaces. Built for marine-style hardware applications with a corrosi...

View full details
$14.09 - $14.09
$14.09
$14.09 - $14.09
$14.09
Square Tapping Screw - Flat Head,#12 x 2"

Square Tapping Screw - Flat Head,#12 x 2"

$43.89 - $43.89
$43.89
$43.89 - $43.89
$43.89
Item locally warehoused

Square tapping screw for marine hardware installations, sized #12 x 2" with a flat head and a square drive. Key Features Square-drive tapping scre...

View full details
$43.89 - $43.89
$43.89
$43.89 - $43.89
$43.89
Stainless Fender Washer 3/8", .078" Thick, OD 1-1/2"

Stainless Fender Washer 3/8", .078" Thick, OD 1-1/2"

$63.49 - $63.49
$63.49
$63.49 - $63.49
$63.49
Item locally warehoused

Replace and reinforce threaded connections with this 3/8" stainless steel fender washer. Its larger outside diameter (OD) helps spread load for a m...

View full details
$63.49 - $63.49
$63.49
$63.49 - $63.49
$63.49
Stainless Fender Washer #10, .062" Thick, OD 1"

Stainless Fender Washer #10, .062" Thick, OD 1"

$69.29 - $69.29
$69.29
$69.29 - $69.29
$69.29
Item locally warehoused

Stainless Fender Washer #10 (.062" thick, OD 1") is an 18-8 stainless steel fender washer made to spread load and help protect surfaces in marine h...

View full details
$69.29 - $69.29
$69.29
$69.29 - $69.29
$69.29
Stainless Fender Washer 1/4", .062" Thick ,OD 1"

Stainless Fender Washer 1/4", .062" Thick ,OD 1"

$60.59 - $60.59
$60.59
$60.59 - $60.59
$60.59
Item locally warehoused

Secure panels and covers with this 1/4" stainless steel fender washer. Featuring an 18-8 stainless construction, a .062" thickness, and a 1" outsid...

View full details
$60.59 - $60.59
$60.59
$60.59 - $60.59
$60.59
Seachoice 18-8 Stainless Steel Wing Nuts, 5/16-18 Size, Pack of 50

Seachoice 18-8 Stainless Steel Wing Nuts, 5/16-18 Size, Pack of 50

$234.39 - $234.39
$234.39
$234.39 - $234.39
$234.39
Item locally warehoused

Seachoice 18-8 stainless steel wing nuts (5/16-18) are designed for quick, tool-free tightening using the built-in “wings.” This pack includes 50 w...

View full details
$234.39 - $234.39
$234.39
$234.39 - $234.39
$234.39
Seachoice 18-8 Stainless Steel Wing Nuts, 1/4-20 Size, Pack of 100

Seachoice 18-8 Stainless Steel Wing Nuts, 1/4-20 Size, Pack of 100

$249.29 - $249.29
$249.29
$249.29 - $249.29
$249.29
Item locally warehoused

Seachoice 18-8 stainless steel wing nuts (manufacturer part number 50-01106) are built for secure, finger-tight fastening—ideal when frequent adjus...

View full details
$249.29 - $249.29
$249.29
$249.29 - $249.29
$249.29
Phillips Tapping Screw - Truss Head #8 x 1"

Phillips Tapping Screw - Truss Head #8 x 1"

$58.29 - $58.29
$58.29
$58.29 - $58.29
$58.29
Item locally warehoused

Reliable Phillips tapping screws for marine and general hardware applications—built with 18-8 stainless steel and a truss head design for secure fa...

View full details
$58.29 - $58.29
$58.29
$58.29 - $58.29
$58.29
Phillips Tapping Screw - Truss Head #8 x 3/4"

Phillips Tapping Screw - Truss Head #8 x 3/4"

$26.39 - $26.39
$26.39
$26.39 - $26.39
$26.39
Item locally warehoused

Phillips tapping screw with a truss head design for fastening marine and general hardware applications. Size: #8 x 3/4". Key Features Phillips dri...

View full details
$26.39 - $26.39
$26.39
$26.39 - $26.39
$26.39
Square Tapping Screw - Flat Head,#10 x 2"

Square Tapping Screw - Flat Head,#10 x 2"

$38.19 - $38.19
$38.19
$38.19 - $38.19
$38.19
Item locally warehoused

Square tapping screw with a flat head design in 18-8 stainless steel for corrosion-resistant fastening in marine and general hardware applications....

View full details
$38.19 - $38.19
$38.19
$38.19 - $38.19
$38.19
Square Tapping Screw - Flat Head,#10 x 1-1/2"

Square Tapping Screw - Flat Head,#10 x 1-1/2"

$72.99 - $72.99
$72.99
$72.99 - $72.99
$72.99
Item locally warehoused

A Seachoice square-drive tapping screw in #10 x 1-1/2" size, built for corrosion resistance with 18-8 stainless steel. Key Features Square drive d...

View full details
$72.99 - $72.99
$72.99
$72.99 - $72.99
$72.99
Flat Washer, 3/4", .109" Thick, OD 1-7/8"

Flat Washer, 3/4", .109" Thick, OD 1-7/8"

$50.99 - $50.99
$50.99
$50.99 - $50.99
$50.99
Item locally warehoused

A corrosion-resistant flat washer sized for 3/4" hardware applications, made from 18-8 stainless steel. Key Features Flat washer design for distri...

View full details
$50.99 - $50.99
$50.99
$50.99 - $50.99
$50.99
Stainless Cotter Pin

Stainless Cotter Pin

$366.89 - $366.89
$366.89
$366.89 - $366.89
$366.89
Item locally warehoused

Seachoice Stainless Cotter Pin (18-8 stainless steel) for reliable securing and anti-rattle retention in marine hardware applications. Key Features...

View full details
$366.89 - $366.89
$366.89
$366.89 - $366.89
$366.89
Phillips Tapping Screw - Truss Head #8 x 1/2"

Phillips Tapping Screw - Truss Head #8 x 1/2"

$31.29 - $31.29
$31.29
$31.29 - $31.29
$31.29
Item locally warehoused

Secure a clean, reliable fastening with this Phillips tapping screw featuring a truss head design and 18-8 stainless steel corrosion resistance. Ke...

View full details
$31.29 - $31.29
$31.29
$31.29 - $31.29
$31.29
Stainless Fender Washer #10, .050" Thick, OD 3/4"

Stainless Fender Washer #10, .050" Thick, OD 3/4"

$34.99 - $34.99
$34.99
$34.99 - $34.99
$34.99
Item locally warehoused

Stainless Steel #10 fender washer made for spreading load and providing a larger bearing surface. This Seachoice/LNS washer measures .050" thick wi...

View full details
$34.99 - $34.99
$34.99
$34.99 - $34.99
$34.99
Phillips Tapping Screw - Pan Head, #14 x 3"

Phillips Tapping Screw - Pan Head, #14 x 3"

$98.49 - $98.49
$98.49
$98.49 - $98.49
$98.49
Item locally warehoused

Phillips tapping screw with a pan head for secure fastening in sheet metal and other applications that benefit from a self-tapping style screw. Key...

View full details
$98.49 - $98.49
$98.49
$98.49 - $98.49
$98.49
Stainless Cotter Pin 5/32" x 2"

Stainless Cotter Pin 5/32" x 2"

$130.99 - $130.99
$130.99
$130.99 - $130.99
$130.99
Item locally warehoused

Secure and lock assemblies with this Stainless Cotter Pin, sized 5/32" x 2". Made from 18-8 stainless steel for dependable corrosion resistance in ...

View full details
$130.99 - $130.99
$130.99
$130.99 - $130.99
$130.99
Flat Washer, 1/2", .078" Thick, OD 1-1/4"

Flat Washer, 1/2", .078" Thick, OD 1-1/4"

$44.39 - $44.39
$44.39
$44.39 - $44.39
$44.39
Item locally warehoused

A marine-ready flat washer made from 18-8 stainless steel, sized for a 1/2" fastener with a .078" thickness and 1-1/4" outside diameter. Key Featur...

View full details
$44.39 - $44.39
$44.39
$44.39 - $44.39
$44.39
Stainless Fender Washer #8, .050" Thick, OD 3/4"

Stainless Fender Washer #8, .050" Thick, OD 3/4"

$41.16 - $41.16
$41.16
$41.16 - $41.16
$41.16
Item locally warehoused

A corrosion-resistant stainless steel fender washer designed to spread load and help protect mounting surfaces when securing hardware. Key Features...

View full details
$41.16 - $41.16
$41.16
$41.16 - $41.16
$41.16
Stainless Cotter Pin 5/32" x 1-1/4"

Stainless Cotter Pin 5/32" x 1-1/4"

$52.69 - $52.69
$52.69
$52.69 - $52.69
$52.69
Item locally warehoused

Secure pins, linkages, and hardware with this stainless cotter pin sized for reliable retention. Key Features Stainless construction helps resist ...

View full details
$52.69 - $52.69
$52.69
$52.69 - $52.69
$52.69
Square Tapping Screw - Flat Head,#10 x 1-1/4"

Square Tapping Screw - Flat Head,#10 x 1-1/4"

$42.59 - $42.59
$42.59
$42.59 - $42.59
$42.59
Item locally warehoused

Square Tapping Screw with a flat head design in #10 x 1-1/4" length, made from 18-8 stainless steel for reliable corrosion resistance on marine and...

View full details
$42.59 - $42.59
$42.59
$42.59 - $42.59
$42.59
Stainless Fender Washer #6, .050" Thick, OD 3/4"

Stainless Fender Washer #6, .050" Thick, OD 3/4"

$30.09 - $30.09
$30.09
$30.09 - $30.09
$30.09
Item locally warehoused

Stainless Fender Washer #6 is an 18-8 stainless steel flat fender washer designed to spread load and help secure hardware connections. Key Features...

View full details
$30.09 - $30.09
$30.09
$30.09 - $30.09
$30.09
Nylon Flat Washer 3/8", 0.62" Thick, OD 1"

Nylon Flat Washer 3/8", 0.62" Thick, OD 1"

$111.59 - $111.59
$111.59
$111.59 - $111.59
$111.59
Item locally warehoused

Use this nylon flat washer to help distribute load and improve surface contact for fasteners in marine and general hardware applications. Key Featu...

View full details
$111.59 - $111.59
$111.59
$111.59 - $111.59
$111.59
Nylon Flat Washer 1/4", 0.56" Thick, OD 11/16"

Nylon Flat Washer 1/4", 0.56" Thick, OD 11/16"

$45.29 - $45.29
$45.29
$45.29 - $45.29
$45.29
Item locally warehoused

SeaChoice Nylon Flat Washer (SKU 50-01029) is a non-metallic flat washer designed to spread load and help protect mating surfaces when used with 1/...

View full details
$45.29 - $45.29
$45.29
$45.29 - $45.29
$45.29
Nylon Flat Washer 5/16", 0.62" Thick, OD 7/8"

Nylon Flat Washer 5/16", 0.62" Thick, OD 7/8"

$59.99 - $59.99
$59.99
$59.99 - $59.99
$59.99
Item locally warehoused

A marine-grade nylon flat washer sized for 5/16" hardware. Helps create a smooth bearing surface under bolt heads and spreads the load over a wider...

View full details
$59.99 - $59.99
$59.99
$59.99 - $59.99
$59.99
Flat Washer, 5/8", .078" Thick, OD 1-1/2"

Flat Washer, 5/8", .078" Thick, OD 1-1/2"

$25.19 - $25.19
$25.19
$25.19 - $25.19
$25.19
Item locally warehoused

Add corrosion-resistant strength to your assembly with this Seachoice 18-8 stainless flat washer. Key Features Flat washer design helps distribute...

View full details
$25.19 - $25.19
$25.19
$25.19 - $25.19
$25.19
Nylon Flat Washer 1/2", 0.62" Thick, OD 1-1/4"

Nylon Flat Washer 1/2", 0.62" Thick, OD 1-1/4"

$152.99 - $152.99
$152.99
$152.99 - $152.99
$152.99
Item locally warehoused

Nylon Flat Washer (Seachoice) sized for 1/2" hardware. Designed to spread load and help protect mounting surfaces while insulating fasteners in man...

View full details
$152.99 - $152.99
$152.99
$152.99 - $152.99
$152.99
Phillips Tapping Screw - Pan Head, #14 x 2"

Phillips Tapping Screw - Pan Head, #14 x 2"

$86.79 - $86.79
$86.79
$86.79 - $86.79
$86.79
Item locally warehoused

Phillips tapping screw with a pan head in #14 x 2" size, made from 18-8 stainless steel for corrosion-resistant fastening. Key Features Pan head f...

View full details
$86.79 - $86.79
$86.79
$86.79 - $86.79
$86.79
Phillips Tapping Screw - Pan Head, #14 x 1-1/4"

Phillips Tapping Screw - Pan Head, #14 x 1-1/4"

$62.99 - $62.99
$62.99
$62.99 - $62.99
$62.99
Item locally warehoused

Secure marine and general-purpose fastening with this Phillips tapping screw designed for dependable thread-forming hold. Features a pan head and P...

View full details
$62.99 - $62.99
$62.99
$62.99 - $62.99
$62.99
Stainless Cotter Pin 5/32" x 1-1/2"

Stainless Cotter Pin 5/32" x 1-1/2"

$111.59 - $111.59
$111.59
$111.59 - $111.59
$111.59
Item locally warehoused

Secure clevis pins, shafts, and other split-pin applications with this stainless cotter pin—designed for corrosion resistance in marine and outdoor...

View full details
$111.59 - $111.59
$111.59
$111.59 - $111.59
$111.59
Phillips Tapping Screw - Pan Head, #14 x 1-1/2"

Phillips Tapping Screw - Pan Head, #14 x 1-1/2"

$58.69 - $58.69
$58.69
$58.69 - $58.69
$58.69
Item locally warehoused

Secure marine and general fastening jobs with this Seachoice Phillips tapping screw in 18-8 stainless steel. The #14 x 1-1/2" pan head design is ma...

View full details
$58.69 - $58.69
$58.69
$58.69 - $58.69
$58.69
Flat Washer, 3/8", .062" Thick, OD 1"

Flat Washer, 3/8", .062" Thick, OD 1"

$44.49 - $44.49
$44.49
$44.49 - $44.49
$44.49
Item locally warehoused

A flat washer made for reliable fastening with a 3/8" screw size, .062" thickness, and 1" outside diameter—made from 18-8 stainless steel for stron...

View full details
$44.49 - $44.49
$44.49
$44.49 - $44.49
$44.49
Flat Washer, 7/16", .062" Thick, OD 1-1/8"

Flat Washer, 7/16", .062" Thick, OD 1-1/8"

$32.99 - $32.99
$32.99
$32.99 - $32.99
$32.99
Item locally warehoused

Durable 7/16" flat washer for marine and general fastening applications. Made from 18-8 stainless steel for corrosion resistance, with .062" thickn...

View full details
$32.99 - $32.99
$32.99
$32.99 - $32.99
$32.99
Square Tapping Screw - Flat Head,#8 x 1-1/2"

Square Tapping Screw - Flat Head,#8 x 1-1/2"

$28.99 - $28.99
$28.99
$28.99 - $28.99
$28.99
Item locally warehoused

Square tapping screw with a flat head in #8 x 1-1/2" size, made from 18-8 stainless steel for corrosion resistance in marine and outdoor environmen...

View full details
$28.99 - $28.99
$28.99
$28.99 - $28.99
$28.99
Stainless Cotter Pin 1/8" x 1-1/2"

Stainless Cotter Pin 1/8" x 1-1/2"

$61.99 - $61.99
$61.99
$61.99 - $61.99
$61.99
Item locally warehoused

Secure cotter-style pin connection for marine fasteners and hardware applications. This SeaChoice stainless cotter pin is made from 18-8 stainless ...

View full details
$61.99 - $61.99
$61.99
$61.99 - $61.99
$61.99
Flat Washer, 5/16", .062" Thick, OD 7/8"

Flat Washer, 5/16", .062" Thick, OD 7/8"

$26.09 - $26.09
$26.09
$26.09 - $26.09
$26.09
Item locally warehoused

Keep fasteners seated securely with this Seachoice flat washer made from 18-8 stainless steel. Designed to spread load and help reduce loosening fo...

View full details
$26.09 - $26.09
$26.09
$26.09 - $26.09
$26.09
Phillips Tapping Screw - Pan Head, #14 x 1"

Phillips Tapping Screw - Pan Head, #14 x 1"

$83.89 - $83.89
$83.89
$83.89 - $83.89
$83.89
Item locally warehoused

A Phillips pan head tapping screw sized #14 x 1" for marine and general hardware fastening needs. Key Features Phillips pan head tapping screw Siz...

View full details
$83.89 - $83.89
$83.89
$83.89 - $83.89
$83.89
Square Tapping Screw - Flat Head,#8 x 1-1/4"

Square Tapping Screw - Flat Head,#8 x 1-1/4"

$26.69 - $26.69
$26.69
$26.69 - $26.69
$26.69
Item locally warehoused

18-8 stainless steel square tapping screw with a flat head for fastening marine hardware and other sheet-metal/trim applications. Key Features Squ...

View full details
$26.69 - $26.69
$26.69
$26.69 - $26.69
$26.69
Stainless Cotter Pin 1/8" x 1"

Stainless Cotter Pin 1/8" x 1"

$136.39 - $136.39
$136.39
$136.39 - $136.39
$136.39
Item locally warehoused

Secure split pins quickly in place with this stainless cotter pin sized for 1/8" holes. Built from 18-8 stainless steel for corrosion resistance in...

View full details
$136.39 - $136.39
$136.39
$136.39 - $136.39
$136.39
Stainless Cotter Pin 1/8" x 2"

Stainless Cotter Pin 1/8" x 2"

$65.59 - $65.59
$65.59
$65.59 - $65.59
$65.59
Item locally warehoused

A stainless cotter pin for secure, reliable fastening—ideal for locking clevis pins and other split-pin applications in marine and outdoor hardware...

View full details
$65.59 - $65.59
$65.59
$65.59 - $65.59
$65.59
Stainless Cotter Pin 1/8" x 1-1/4"

Stainless Cotter Pin 1/8" x 1-1/4"

$85.69 - $85.69
$85.69
$85.69 - $85.69
$85.69
Item locally warehoused

Keep hardware secured with this Seachoice stainless cotter pin sized 1/8" x 1-1/4". Made from 18-8 stainless steel for reliable corrosion resistanc...

View full details
$85.69 - $85.69
$85.69
$85.69 - $85.69
$85.69
Stainless Cotter Pin 3/32" x 1-1/2"

Stainless Cotter Pin 3/32" x 1-1/2"

$77.79 - $77.79
$77.79
$77.79 - $77.79
$77.79
Item locally warehoused

Secure and lock castled nuts and other clevis-style connections with this stainless cotter pin. Built from 18-8 stainless steel for dependable corr...

View full details
$77.79 - $77.79
$77.79
$77.79 - $77.79
$77.79
Nylon Flat Washer #10, 0.32" Thick, OD 7/16"

Nylon Flat Washer #10, 0.32" Thick, OD 7/16"

$21.39 - $21.39
$21.39
$21.39 - $21.39
$21.39
Item locally warehoused

A durable #10 nylon flat washer designed to spread load and help protect fasteners and mating surfaces in marine and other lightweight applications...

View full details
$21.39 - $21.39
$21.39
$21.39 - $21.39
$21.39
Flat Washer, 1/4", .050" Thick, OD 11/16"

Flat Washer, 1/4", .050" Thick, OD 11/16"

$26.69 - $26.69
$26.69
$26.69 - $26.69
$26.69
Item locally warehoused

SeaChoice flat washer designed for hardware mounting applications where you need a 1/4" bolt size with a .050" thickness and 11/16" outer diameter ...

View full details
$26.69 - $26.69
$26.69
$26.69 - $26.69
$26.69