Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Fasteners & Mounting

Marine Hardware & Installation

Marine Fasteners, Mounting Hardware & Installation Supplies

Shop marine-grade screws, bolts, nuts, washers, brackets, backing plates, rivets, mounting pads, sealants, thread lockers, and anti-seize for secure hardware installations in saltwater environments.

Shop Fasteners & Mounting Stainless Screws Mounting Brackets
Install Check

Match metal grade, fastener size, thread type, backing support, bedding compound, and load direction before drilling into the boat.

Shop Backing Plates

Use marine-grade hardware and proper sealing practices. Confirm load ratings, material compatibility, corrosion risk, deck core protection, and manufacturer instructions before installation.

Quick ShopFitmentHardware TypesInstall NotesInspectionFAQDeck HardwareTools

Fitment

Choose the Right Metal, Size, and Support

Marine fasteners need to match the job. Consider stainless grade, length, diameter, head style, thread type, washer size, backing plate needs, and whether the hardware is loaded in pull, shear, or vibration.

316 Stainless 304 Stainless Threaded Rod

Corrosion

Saltwater Hardware Needs Material Discipline

316 stainless is commonly preferred for saltwater exposure, while 304 stainless may suit freshwater or less demanding areas. Isolate dissimilar metals where needed and use anti-seize on stainless threads to reduce galling.

If a fastener is structural or safety-critical, confirm the correct grade, torque, backing, and installation method.

SS

Stainless Fasteners

Screws, bolts, nuts, washers, threaded rod, lock nuts, and specialty head styles for marine repair and upgrades.

MNT

Mounting Hardware

Brackets, bases, pads, backing plates, antenna mounts, rod holder mounts, and accessory supports.

BED

Bedding & Bonding

Sealants, adhesives, thread lockers, anti-seize, and bedding compounds help hardware stay secure and watertight.

Install Notes

Seal Holes and Spread Loads

Fastener selection is only part of the job. Hardware installed through decks, cabins, rails, transoms, or cored panels needs the right pilot hole, sealant, backing, washer, and torque.

Pilot holesUse the correct drill size for the fastener, substrate, and thread engagement.
Bedding compoundSeal penetrations to keep water out of cores, cabins, lockers, and electronics areas.
Backing platesSpread loads for cleats, davits, ladders, rails, seats, and high-load deck hardware.
Thread careUse thread locker or anti-seize where appropriate, especially on stainless-to-stainless threads.

Inspection

Replace Corroded, Loose, or Mismatched Hardware

Check for rust streaks, loose brackets, elongated holes, cracked sealant, missing washers, galvanic corrosion, stripped threads, and water intrusion around mounted hardware.

Washers Nuts Adhesives

Projects

Good Hardware Makes Upgrades Last

Electronics, antennas, cleats, rod holders, seats, speakers, lights, ladders, hatches, and deck fittings all rely on correctly chosen mounting hardware.

For heavy or safety-related gear, do a dry fit, mark hole locations carefully, and confirm access to the backside before drilling.

FAQ

Marine Fastener Questions

Should I use 304 or 316 stainless fasteners on a boat?

316 stainless is usually preferred for saltwater and exposed marine use because it has stronger corrosion resistance. 304 stainless can be suitable for freshwater or less exposed applications.

Why do stainless fasteners seize or gall?

Stainless threads can gall when tightened under friction, especially stainless-on-stainless. Anti-seize, correct thread engagement, and careful tightening can help reduce the risk.

When do I need a backing plate?

Use backing plates when hardware carries significant load, such as cleats, rails, ladders, davits, seats, and deck fittings. Backing plates spread load and help prevent crushing or pull-through.

Should deck fasteners be sealed?

Yes. Holes through decks, cabins, and cored panels should be sealed with the correct marine bedding compound to help prevent leaks and core damage.

Ready for a Stronger Install?

Shop Marine Fasteners, Brackets, Backing Plates & Sealants

Search by fastener type, material, size, head style, mounting application, sealant need, bracket type, or installation project.

Shop Fasteners & Mounting Backing Plates Sealants

Filters

Phillips Tapping Screws - Oval Head, #8 x 1"

Phillips Tapping Screws - Oval Head, #8 x 1"

$35.19 - $35.19
$35.19
$35.19 - $35.19
$35.19
Item locally warehoused

Phillips tapping screws with an oval head in 18-8 stainless steel for marine fastening and mounting applications. Key Features Phillips drive for ...

View full details
$35.19 - $35.19
$35.19
$35.19 - $35.19
$35.19
Phillips Tapping Screws - Oval Head, #8 x 5/8"

Phillips Tapping Screws - Oval Head, #8 x 5/8"

$31.09 - $31.09
$31.09
$31.09 - $31.09
$31.09
Item locally warehoused

Reliable fastening for marine and general sheet-metal applications using Seachoice Phillips tapping screws with an oval head and 18-8 stainless ste...

View full details
$31.09 - $31.09
$31.09
$31.09 - $31.09
$31.09
Hex Nut 1/4-20

Hex Nut 1/4-20

$31.29 - $31.29
$31.29
$31.29 - $31.29
$31.29
Item locally warehoused

18-8 Stainless Steel.

$31.29 - $31.29
$31.29
$31.29 - $31.29
$31.29
Hex Nut 7/16-14

Hex Nut 7/16-14

$88.59 - $88.59
$88.59
$88.59 - $88.59
$88.59
Item locally warehoused

A coarse-thread hex nut for marine and general fastening applications—made from 18-8 stainless steel for corrosion resistance. Key Features Hex nu...

View full details
$88.59 - $88.59
$88.59
$88.59 - $88.59
$88.59
Phillips Tapping Screws - Flat Head, #10 x 3"

Phillips Tapping Screws - Flat Head, #10 x 3"

$48.39 - $48.39
$48.39
$48.39 - $48.39
$48.39
Item locally warehoused

Phillips tapping screws with a flat head design for secure fastening in #10 size applications. Built from 18-8 stainless steel for corrosion resist...

View full details
$48.39 - $48.39
$48.39
$48.39 - $48.39
$48.39
Phillips Tapping Screws - Flat Head, #10 x 2"

Phillips Tapping Screws - Flat Head, #10 x 2"

$36.39 - $36.39
$36.39
$36.39 - $36.39
$36.39
Item locally warehoused

Phillips tapping screws in 18-8 stainless steel, featuring a flat head design for fast, secure fastening in marine and general-purpose projects. Ke...

View full details
$36.39 - $36.39
$36.39
$36.39 - $36.39
$36.39
Blind Rivet, 3/16" x 5/8"

Blind Rivet, 3/16" x 5/8"

$18.19 - $18.19
$18.19
$18.19 - $18.19
$18.19
Item locally warehoused

LNS blind rivets are a simple, reliable way to join materials from one side—ideal for quick repairs and clean finishing on marine hardware and gene...

View full details
$18.19 - $18.19
$18.19
$18.19 - $18.19
$18.19
Blind Rivet, 3/16" x 1/2"

Blind Rivet, 3/16" x 1/2"

$35.69 - $35.69
$35.69
$35.69 - $35.69
$35.69
Item locally warehoused

Secure fast, clean connections in tight spaces with this aluminum blind rivet. It’s sized for a 3/16" diameter hole with a 1/2" length grip. Key Fe...

View full details
$35.69 - $35.69
$35.69
$35.69 - $35.69
$35.69
Blind Rivet, 3/16" x 3/8"

Blind Rivet, 3/16" x 3/8"

$33.49 - $33.49
$33.49
$33.49 - $33.49
$33.49
Item locally warehoused

Secure materials with a reliable aluminum blind rivet designed for clean, finished fastening from one side. Key Features Blind (one-side) fastenin...

View full details
$33.49 - $33.49
$33.49
$33.49 - $33.49
$33.49
Phillips Tapping Screws - Oval Head, #6 x 1-1/2"

Phillips Tapping Screws - Oval Head, #6 x 1-1/2"

$35.49 - $35.49
$35.49
$35.49 - $35.49
$35.49
Item locally warehoused

Seachoice Phillips tapping screws with an oval head design for #6 x 1-1/2" applications—built from 18-8 stainless steel for reliable corrosion resi...

View full details
$35.49 - $35.49
$35.49
$35.49 - $35.49
$35.49
Phillips Tapping Screws - Flat Head, #10 x 2-1/2"

Phillips Tapping Screws - Flat Head, #10 x 2-1/2"

$43.79 - $43.79
$43.79
$43.79 - $43.79
$43.79
Item locally warehoused

18-8 Stainless Steel.

$43.79 - $43.79
$43.79
$43.79 - $43.79
$43.79
Blind Rivet, 3/16" x 1/4"

Blind Rivet, 3/16" x 1/4"

$25.59 - $25.59
$25.59
$25.59 - $25.59
$25.59
Item locally warehoused

Blind Rivet sized for quick, clean fastening—ideal when you need a secure connection from one side of the material. Key Features Blind rivet style...

View full details
$25.59 - $25.59
$25.59
$25.59 - $25.59
$25.59
Phillips Tapping Screws - Flat Head, #10 x 1-1/2"

Phillips Tapping Screws - Flat Head, #10 x 1-1/2"

$58.49 - $58.49
$58.49
$58.49 - $58.49
$58.49
Item locally warehoused

Phillips tapping screws with a flat head in #10 x 1-1/2" size. Made from 18-8 stainless steel for corrosion-resistant fastening. Key Features Phil...

View full details
$58.49 - $58.49
$58.49
$58.49 - $58.49
$58.49
Hex Nut 10-32

Hex Nut 10-32

$22.29 - $22.29
$22.29
$22.29 - $22.29
$22.29
Item locally warehoused

Secure threaded connections with this SeaChoice hex nut in 10-32 size, made from 18-8 stainless steel for corrosion-resistant marine hardware appli...

View full details
$22.29 - $22.29
$22.29
$22.29 - $22.29
$22.29
Phillips Tapping Screws - Oval Head, #8 x 1/2"

Phillips Tapping Screws - Oval Head, #8 x 1/2"

$32.69 - $32.69
$32.69
$32.69 - $32.69
$32.69
Item locally warehoused

Use these Phillips tapping screws to fasten and secure projects using durable 18-8 stainless steel hardware. Key Features Phillips drive for contr...

View full details
$32.69 - $32.69
$32.69
$32.69 - $32.69
$32.69
Phillips Tapping Screws - Flat Head, #10 x 1-1/4"

Phillips Tapping Screws - Flat Head, #10 x 1-1/4"

$56.79 - $56.79
$56.79
$56.79 - $56.79
$56.79
Item locally warehoused

Phillips tapping screws with a flat head for #10 applications at 1-1/4" length—made from 18-8 stainless steel for corrosion-resistant fastening in ...

View full details
$56.79 - $56.79
$56.79
$56.79 - $56.79
$56.79
Hex Nut 10-24

Hex Nut 10-24

$26.59 - $26.59
$26.59
$26.59 - $26.59
$26.59
Item locally warehoused

Secure threaded connections with this Hex Nut sized for 10-24 hardware, made from 18-8 stainless steel for dependable corrosion resistance. Key Fea...

View full details
$26.59 - $26.59
$26.59
$26.59 - $26.59
$26.59
Phillips Tapping Screws - Flat Head, #10 x 1-3/4"

Phillips Tapping Screws - Flat Head, #10 x 1-3/4"

$31.79 - $31.79
$31.79
$31.79 - $31.79
$31.79
Item locally warehoused

These Phillips tapping screws with a flat head are made from 18-8 stainless steel and sized for a #10 screw with a 1-3/4" length. They’re a practic...

View full details
$31.79 - $31.79
$31.79
$31.79 - $31.79
$31.79
Hex Nut 8-32

Hex Nut 8-32

$24.59 - $24.59
$24.59
$24.59 - $24.59
$24.59
Item locally warehoused

A durable 8-32 hex nut made from 18-8 stainless steel—ideal for securing marine and general-purpose hardware with consistent, corrosion-resistant t...

View full details
$24.59 - $24.59
$24.59
$24.59 - $24.59
$24.59
Phillips Tapping Screws - Flat Head, #10 x 3/4"

Phillips Tapping Screws - Flat Head, #10 x 3/4"

$38.19 - $38.19
$38.19
$38.19 - $38.19
$38.19
Item locally warehoused

These Seachoice Phillips tapping screws feature a flat head Phillips drive in #10 size and 3/4" length for fastening and assembly on marine and gen...

View full details
$38.19 - $38.19
$38.19
$38.19 - $38.19
$38.19
Phillips Tapping Screws - Oval Head, #6 x 1-1/4"

Phillips Tapping Screws - Oval Head, #6 x 1-1/4"

$32.79 - $32.79
$32.79
$32.79 - $32.79
$32.79
Item locally warehoused

Secure fittings with these Phillips oval head tapping screws, made from 18-8 stainless steel for reliable corrosion resistance in marine environmen...

View full details
$32.79 - $32.79
$32.79
$32.79 - $32.79
$32.79
Blind Rivet, 3/16" x 3/4"

Blind Rivet, 3/16" x 3/4"

$108.19 - $108.19
$108.19
$108.19 - $108.19
$108.19
Item locally warehoused

A marine-rated blind rivet for fastening when you need access from one side of the material. This version is built in 18-8 stainless steel with a 3...

View full details
$108.19 - $108.19
$108.19
$108.19 - $108.19
$108.19
Hex Nut 6-32

Hex Nut 6-32

$22.29 - $22.29
$22.29
$22.29 - $22.29
$22.29
Item locally warehoused

A 6-32 hex nut made from 18-8 stainless steel for corrosion-resistant, marine-style hardware applications. Key Features Size: 6-32 Type: hex nut M...

View full details
$22.29 - $22.29
$22.29
$22.29 - $22.29
$22.29
Blind Rivet, 3/16" x 5/8"

Blind Rivet, 3/16" x 5/8"

$79.19 - $79.19
$79.19
$79.19 - $79.19
$79.19
Item locally warehoused

A marine-ready blind rivet made from 18-8 stainless steel for permanent one-side fastening. Sized 3/16" x 5/8" for use when you can access only one...

View full details
$79.19 - $79.19
$79.19
$79.19 - $79.19
$79.19
Phillips Tapping Screws - Flat Head, #10 x 5/8"

Phillips Tapping Screws - Flat Head, #10 x 5/8"

$28.69 - $28.69
$28.69
$28.69 - $28.69
$28.69
Item locally warehoused

Phillips tapping screws with a flat head in #10 x 5/8" size, made from 18-8 stainless steel for corrosion resistance in demanding marine environmen...

View full details
$28.69 - $28.69
$28.69
$28.69 - $28.69
$28.69
Phillips Tapping Screws - Flat Head, #10 x 1"

Phillips Tapping Screws - Flat Head, #10 x 1"

$34.99 - $34.99
$34.99
$34.99 - $34.99
$34.99
Item locally warehoused

Phillips tapping screws with a flat head, sized #10 x 1" and made from 18-8 stainless steel for corrosion-resistant fastening in marine and other h...

View full details
$34.99 - $34.99
$34.99
$34.99 - $34.99
$34.99
Phillips Tapping Screws - Oval Head, #14 x 3"

Phillips Tapping Screws - Oval Head, #14 x 3"

$105.69 - $105.69
$105.69
$105.69 - $105.69
$105.69
Item locally warehoused

Phillips tapping screws with an oval head and #14 thread size, sized at 3" length. Made from 18-8 stainless steel for dependable corrosion resistan...

View full details
$105.69 - $105.69
$105.69
$105.69 - $105.69
$105.69
Phillips Tapping Screws - Oval Head, #6 x 1/2"

Phillips Tapping Screws - Oval Head, #6 x 1/2"

$13.59 - $13.59
$13.59
$13.59 - $13.59
$13.59
Item locally warehoused

Seachoice Phillips tapping screws with an oval head in size #6 x 1/2"—made from 18-8 stainless steel for durable, corrosion-resistant fastening. Ke...

View full details
$13.59 - $13.59
$13.59
$13.59 - $13.59
$13.59
Phillips Tapping Screws - Oval Head, #6 x 1"

Phillips Tapping Screws - Oval Head, #6 x 1"

$22.89 - $22.89
$22.89
$22.89 - $22.89
$22.89
Item locally warehoused

Phillips tapping screws with an oval head and #6 x 1" size for secure, self-starting fastening in marine and general hardware applications. Key Fea...

View full details
$22.89 - $22.89
$22.89
$22.89 - $22.89
$22.89
Phillips Tapping Screws - Flat Head, #10 x 1/2"

Phillips Tapping Screws - Flat Head, #10 x 1/2"

$33.89 - $33.89
$33.89
$33.89 - $33.89
$33.89
Item locally warehoused

Phillips tapping screws with a flat head design in #10 x 1/2" size—made from 18-8 stainless steel for reliable corrosion resistance in marine and o...

View full details
$33.89 - $33.89
$33.89
$33.89 - $33.89
$33.89
Phillips Tapping Screws - Oval Head, #6 x 3/4"

Phillips Tapping Screws - Oval Head, #6 x 3/4"

$23.99 - $23.99
$23.99
$23.99 - $23.99
$23.99
Item locally warehoused

Phillips tapping screws with an oval head in 18-8 stainless steel—ideal for quick, secure fastening where corrosion resistance matters. Key Feature...

View full details
$23.99 - $23.99
$23.99
$23.99 - $23.99
$23.99
Blind Rivet, 3/16" x 3/8"

Blind Rivet, 3/16" x 3/8"

$125.69 - $125.69
$125.69
$125.69 - $125.69
$125.69
Item locally warehoused

A marine-ready blind rivet for fastening jobs that require a secure connection on both sides of thin to medium materials—no access to the backside ...

View full details
$125.69 - $125.69
$125.69
$125.69 - $125.69
$125.69
Phillips Tapping Screws - Oval Head, #6 x 5/8"

Phillips Tapping Screws - Oval Head, #6 x 5/8"

$17.49 - $17.49
$17.49
$17.49 - $17.49
$17.49
Item locally warehoused

Phillips tapping screws with an oval head for secure fastening in marine and general hardware applications. Built from 18-8 stainless steel for cor...

View full details
$17.49 - $17.49
$17.49
$17.49 - $17.49
$17.49
Seachoice 18-8 Stainless Steel Acorn Cap Nuts, 3/8-16 Size, Pack of 50

Seachoice 18-8 Stainless Steel Acorn Cap Nuts, 3/8-16 Size, Pack of 50

$100.69 - $100.69
$100.69
$100.69 - $100.69
$100.69
Item locally warehoused

Seachoice 18-8 stainless steel acorn cap nuts give you a finished, rounded look while helping protect bolt threads—ideal when only a small amount o...

View full details
$100.69 - $100.69
$100.69
$100.69 - $100.69
$100.69
Seachoice 18-8 Stainless Steel Acorn Cap Nuts, 5/16-18 Size, Pack of 50

Seachoice 18-8 Stainless Steel Acorn Cap Nuts, 5/16-18 Size, Pack of 50

$82.49 - $82.49
$82.49
$82.49 - $82.49
$82.49
Item locally warehoused

Seachoice 18-8 stainless steel acorn cap nuts provide a clean, closed finish over the threaded end of a bolt—ideal for projects where only a small ...

View full details
$82.49 - $82.49
$82.49
$82.49 - $82.49
$82.49
Phillips Tapping Screws - Oval Head, #14 x 2"

Phillips Tapping Screws - Oval Head, #14 x 2"

$100.99 - $100.99
$100.99
$100.99 - $100.99
$100.99
Item locally warehoused

Secure applications with Phillips tapping screws featuring an oval head design in 18-8 stainless steel for dependable, corrosion-resistant fastenin...

View full details
$100.99 - $100.99
$100.99
$100.99 - $100.99
$100.99
Phillips Tapping Screws - Flat Head, #8 x 3"

Phillips Tapping Screws - Flat Head, #8 x 3"

$57.79 - $57.79
$57.79
$57.79 - $57.79
$57.79
Item locally warehoused

SeaChoice Phillips tapping screws with a flat head, #8 x 3" size—made from 18-8 stainless steel for corrosion-resistant fastening in marine and gen...

View full details
$57.79 - $57.79
$57.79
$57.79 - $57.79
$57.79
Phillips Tapping Screws - Flat Head, #8 x 2-1/2"

Phillips Tapping Screws - Flat Head, #8 x 2-1/2"

$42.49 - $42.49
$42.49
$42.49 - $42.49
$42.49
Item locally warehoused

Replace worn fasteners with Phillips tapping screws designed for secure, corrosion-resistant mounting in marine and general fastening applications....

View full details
$42.49 - $42.49
$42.49
$42.49 - $42.49
$42.49
Blind Rivet, 3/16" x 1/2"

Blind Rivet, 3/16" x 1/2"

$161.39 - $161.39
$161.39
$161.39 - $161.39
$161.39
Item locally warehoused

Secure marine-grade connections with this 3/16" x 1/2" blind rivet made from 18-8 stainless steel. Key Features Blind rivet for fast, one-sided in...

View full details
$161.39 - $161.39
$161.39
$161.39 - $161.39
$161.39
Phillips Tapping Screws - Flat Head, #8 x 2"

Phillips Tapping Screws - Flat Head, #8 x 2"

$32.99 - $32.99
$32.99
$32.99 - $32.99
$32.99
Item locally warehoused

Phillips tapping screws with a flat head for secure fastening. Built from 18-8 stainless steel for corrosion resistance in marine and outdoor envir...

View full details
$32.99 - $32.99
$32.99
$32.99 - $32.99
$32.99
Phillips Tapping Screws - Oval Head, #14 x 1-1/4"

Phillips Tapping Screws - Oval Head, #14 x 1-1/4"

$62.69 - $62.69
$62.69
$62.69 - $62.69
$62.69
Item locally warehoused

Keep mounting and sheet-metal assembly secure with Phillips tapping screws featuring an oval head and #14 x 1-1/4" size. Key Features Phillips dri...

View full details
$62.69 - $62.69
$62.69
$62.69 - $62.69
$62.69
Phillips Tapping Screws - Flat Head, #8 x 1-1/2"

Phillips Tapping Screws - Flat Head, #8 x 1-1/2"

$44.19 - $44.19
$44.19
$44.19 - $44.19
$44.19
Item locally warehoused

Phillips tapping screws with a flat head design in 18-8 stainless steel—ideal for marine and general mounting where corrosion resistance matters. K...

View full details
$44.19 - $44.19
$44.19
$44.19 - $44.19
$44.19
Phillips Machine Screw - Oval Head, 1/4"-20 x 1-1/2"

Phillips Machine Screw - Oval Head, 1/4"-20 x 1-1/2"

$64.39 - $64.39
$64.39
$64.39 - $64.39
$64.39
Item locally warehoused

Phillips machine screw with an oval head in 18-8 stainless steel for corrosion-resistant fastening. This size is 1/4"-20 x 1-1/2" (SKU: 50-00398). ...

View full details
$64.39 - $64.39
$64.39
$64.39 - $64.39
$64.39
Phillips Machine Screw - Pan Head. 1/4"-20 x 4"

Phillips Machine Screw - Pan Head. 1/4"-20 x 4"

$110.19 - $110.19
$110.19
$110.19 - $110.19
$110.19
Item locally warehoused

Replace and fasten with this Seachoice Phillips machine screw—pan head, 1/4"-20 x 4"—made from 18-8 stainless steel for corrosion resistance in mar...

View full details
$110.19 - $110.19
$110.19
$110.19 - $110.19
$110.19
Phillips Machine Screw - Oval Head, 1/4"-20 x 1-1/4"

Phillips Machine Screw - Oval Head, 1/4"-20 x 1-1/4"

$42.49 - $42.49
$42.49
$42.49 - $42.49
$42.49
Item locally warehoused

Reliable oval-head Phillips machine screw for fastening applications that benefit from a smooth, low-profile head. Key Features Phillips drive for...

View full details
$42.49 - $42.49
$42.49
$42.49 - $42.49
$42.49
Phillips Tapping Screws - Flat Head, #8 x 1-3/4"

Phillips Tapping Screws - Flat Head, #8 x 1-3/4"

$31.99 - $31.99
$31.99
$31.99 - $31.99
$31.99
Item locally warehoused

Secure panels and trim with these Phillips flat head tapping screws in #8 x 1-3/4" size, made from 18-8 stainless steel for strong holding power in...

View full details
$31.99 - $31.99
$31.99
$31.99 - $31.99
$31.99
Phillips Machine Screw - Oval Head, 1/4"-20 x 1-3/4"

Phillips Machine Screw - Oval Head, 1/4"-20 x 1-3/4"

$69.09 - $69.09
$69.09
$69.09 - $69.09
$69.09
Item locally warehoused

The Phillips Machine Screw with an oval head is built for secure, flush-looking fastening with coarse 1/4-20 thread and a 1-3/4" length in 18-8 sta...

View full details
$69.09 - $69.09
$69.09
$69.09 - $69.09
$69.09
Phillips Tapping Screws - Oval Head, #14 x 1"

Phillips Tapping Screws - Oval Head, #14 x 1"

$97.59 - $97.59
$97.59
$97.59 - $97.59
$97.59
Item locally warehoused

Phillips tapping screws with an oval head and Phillips drive, sized #14 x 1" for marine-style mounting and fastener replacement. Key Features Phil...

View full details
$97.59 - $97.59
$97.59
$97.59 - $97.59
$97.59