Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Fasteners & Mounting

Marine Hardware & Installation

Marine Fasteners, Mounting Hardware & Installation Supplies

Shop marine-grade screws, bolts, nuts, washers, brackets, backing plates, rivets, mounting pads, sealants, thread lockers, and anti-seize for secure hardware installations in saltwater environments.

Shop Fasteners & Mounting Stainless Screws Mounting Brackets
Install Check

Match metal grade, fastener size, thread type, backing support, bedding compound, and load direction before drilling into the boat.

Shop Backing Plates

Use marine-grade hardware and proper sealing practices. Confirm load ratings, material compatibility, corrosion risk, deck core protection, and manufacturer instructions before installation.

Quick ShopFitmentHardware TypesInstall NotesInspectionFAQDeck HardwareTools

Fitment

Choose the Right Metal, Size, and Support

Marine fasteners need to match the job. Consider stainless grade, length, diameter, head style, thread type, washer size, backing plate needs, and whether the hardware is loaded in pull, shear, or vibration.

316 Stainless 304 Stainless Threaded Rod

Corrosion

Saltwater Hardware Needs Material Discipline

316 stainless is commonly preferred for saltwater exposure, while 304 stainless may suit freshwater or less demanding areas. Isolate dissimilar metals where needed and use anti-seize on stainless threads to reduce galling.

If a fastener is structural or safety-critical, confirm the correct grade, torque, backing, and installation method.

SS

Stainless Fasteners

Screws, bolts, nuts, washers, threaded rod, lock nuts, and specialty head styles for marine repair and upgrades.

MNT

Mounting Hardware

Brackets, bases, pads, backing plates, antenna mounts, rod holder mounts, and accessory supports.

BED

Bedding & Bonding

Sealants, adhesives, thread lockers, anti-seize, and bedding compounds help hardware stay secure and watertight.

Install Notes

Seal Holes and Spread Loads

Fastener selection is only part of the job. Hardware installed through decks, cabins, rails, transoms, or cored panels needs the right pilot hole, sealant, backing, washer, and torque.

Pilot holesUse the correct drill size for the fastener, substrate, and thread engagement.
Bedding compoundSeal penetrations to keep water out of cores, cabins, lockers, and electronics areas.
Backing platesSpread loads for cleats, davits, ladders, rails, seats, and high-load deck hardware.
Thread careUse thread locker or anti-seize where appropriate, especially on stainless-to-stainless threads.

Inspection

Replace Corroded, Loose, or Mismatched Hardware

Check for rust streaks, loose brackets, elongated holes, cracked sealant, missing washers, galvanic corrosion, stripped threads, and water intrusion around mounted hardware.

Washers Nuts Adhesives

Projects

Good Hardware Makes Upgrades Last

Electronics, antennas, cleats, rod holders, seats, speakers, lights, ladders, hatches, and deck fittings all rely on correctly chosen mounting hardware.

For heavy or safety-related gear, do a dry fit, mark hole locations carefully, and confirm access to the backside before drilling.

FAQ

Marine Fastener Questions

Should I use 304 or 316 stainless fasteners on a boat?

316 stainless is usually preferred for saltwater and exposed marine use because it has stronger corrosion resistance. 304 stainless can be suitable for freshwater or less exposed applications.

Why do stainless fasteners seize or gall?

Stainless threads can gall when tightened under friction, especially stainless-on-stainless. Anti-seize, correct thread engagement, and careful tightening can help reduce the risk.

When do I need a backing plate?

Use backing plates when hardware carries significant load, such as cleats, rails, ladders, davits, seats, and deck fittings. Backing plates spread load and help prevent crushing or pull-through.

Should deck fasteners be sealed?

Yes. Holes through decks, cabins, and cored panels should be sealed with the correct marine bedding compound to help prevent leaks and core damage.

Ready for a Stronger Install?

Shop Marine Fasteners, Brackets, Backing Plates & Sealants

Search by fastener type, material, size, head style, mounting application, sealant need, bracket type, or installation project.

Shop Fasteners & Mounting Backing Plates Sealants

Filters

Phillips Machine Screw - Flat Head, 5/16"-18 x 2-1/2" Sold out

Phillips Machine Screw - Flat Head, 5/16"-18 x 2-1/2"

$29.99 - $29.99
$29.99
$29.99 - $29.99
$29.99
Out of stock

Phillips machine screw with a flat head for secure fastening. 5/16"-18 UNC thread, 2-1/2" long. Made from 18-8 stainless steel for corrosion resist...

View full details
$29.99 - $29.99
$29.99
$29.99 - $29.99
$29.99
Sold out
Phillips Machine Screw - Flat Head, 5/16"-18 x 2" Sold out

Phillips Machine Screw - Flat Head, 5/16"-18 x 2"

$63.21 - $63.21
$63.21
$63.21 - $63.21
$63.21
Out of stock

Phillips Machine Screw - Flat Head, 5/16\"-18 x 2\" (18-8 stainless steel) provides durable, corrosion-resistant fastening for general assemblies r...

View full details
$63.21 - $63.21
$63.21
$63.21 - $63.21
$63.21
Sold out
Phillips Machine Screw - Flat Head, 5/16"-18 x 1-1/2" Sold out

Phillips Machine Screw - Flat Head, 5/16"-18 x 1-1/2"

$47.59 - $47.59
$47.59
$47.59 - $47.59
$47.59
Out of stock

Phillips Machine Screw - Flat Head, 5/16\"-18 x 1-1/2\" in 18-8 stainless steel. This bulk fastener is designed for general mounting and hardware p...

View full details
$47.59 - $47.59
$47.59
$47.59 - $47.59
$47.59
Sold out
Phillips Machine Screw - Oval Head, 10-24 x 1-1/2" Sold out

Phillips Machine Screw - Oval Head, 10-24 x 1-1/2"

$59.39 - $59.39
$59.39
$59.39 - $59.39
$59.39
Out of stock

Phillips machine screw with an oval head. Size 10-24 x 1-1/2 inches. Made from 18-8 stainless steel for corrosion resistance.Ideal for bulk fastene...

View full details
$59.39 - $59.39
$59.39
$59.39 - $59.39
$59.39
Sold out
Phillips Machine Screw - Pan Head. 10-32 x 5/8"
Sold out

Phillips Machine Screw - Pan Head. 10-32 x 5/8"

$91.69 - $91.69
$91.69
$91.69 - $91.69
$91.69
Out of stock

Phillips pan-head machine screw, 10-32 thread, 5/8\" long. Made from 18-8 stainless steel for strength and corrosion resistance.Compatible Applicat...

View full details
$91.69 - $91.69
$91.69
$91.69 - $91.69
$91.69
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 4"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 4"

$70.69 - $70.69
$70.69
$70.69 - $70.69
$70.69
Out of stock

Phillips machine screw, pan head, 10-24 x 4". Made from 18-8 stainless steel for corrosion resistance.Compatible Applications Bulk fastener supply ...

View full details
$70.69 - $70.69
$70.69
$70.69 - $70.69
$70.69
Sold out
Phillips Machine Screw - Pan Head. 10-32 x 1/2"
Sold out

Phillips Machine Screw - Pan Head. 10-32 x 1/2"

$32.69 - $32.69
$32.69
$32.69 - $32.69
$32.69
Out of stock

Phillips machine screw with a pan head. Thread size 10-32, length 1/2 inch. Made from 18-8 stainless steel for durability and corrosion resistance....

View full details
$32.69 - $32.69
$32.69
$32.69 - $32.69
$32.69
Sold out
Phillips Machine Screw - Oval Head, 5/16"-18 x 4"
Sold out

Phillips Machine Screw - Oval Head, 5/16"-18 x 4"

$66.99 - $66.99
$66.99
$66.99 - $66.99
$66.99
Out of stock

18-8 stainless steel Phillips oval-head machine screw, 5/16"-18 x 4". This screw combines corrosion resistance with dependable strength for metal f...

View full details
$66.99 - $66.99
$66.99
$66.99 - $66.99
$66.99
Sold out
Phillips Machine Screw - Oval Head, 10-24 x 3/4"
Sold out

Phillips Machine Screw - Oval Head, 10-24 x 3/4"

$42.69 - $42.69
$42.69
$42.69 - $42.69
$42.69
Out of stock

Phillips Machine Screw - Oval Head, 10-24 x 3/4" in 18-8 stainless steel provides durable, corrosion-resistant fastening for general metal-to-metal...

View full details
$42.69 - $42.69
$42.69
$42.69 - $42.69
$42.69
Sold out
Phillips Machine Screw - Oval Head, 5/16"-18 x 3"
Sold out

Phillips Machine Screw - Oval Head, 5/16"-18 x 3"

$33.79 - $33.79
$33.79
$33.79 - $33.79
$33.79
Out of stock

Phillips machine screw with an oval head for a clean, flush finish. This 5/16\"-18 x 3\" fastener is made from 18-8 stainless steel for corrosion r...

View full details
$33.79 - $33.79
$33.79
$33.79 - $33.79
$33.79
Sold out
Phillips Machine Screw - Oval Head, 5/16"-18 x 2-1/2"
Sold out

Phillips Machine Screw - Oval Head, 5/16"-18 x 2-1/2"

$29.89 - $29.89
$29.89
$29.89 - $29.89
$29.89
Out of stock

Phillips Machine Screw - Oval Head, 5/16\"-18 x 2-1/2\"Made from 18-8 stainless steel for corrosion resistance and long service life. Thread size: ...

View full details
$29.89 - $29.89
$29.89
$29.89 - $29.89
$29.89
Sold out
Phillips Machine Screw - Oval Head, 10-24 x 1"
Sold out

Phillips Machine Screw - Oval Head, 10-24 x 1"

$41.49 - $41.49
$41.49
$41.49 - $41.49
$41.49
Out of stock

Phillips Machine Screw - Oval Head, 10-24 x 1". Made from 18-8 stainless steel for corrosion resistance and durability. Drive Type: Phillips; Head:...

View full details
$41.49 - $41.49
$41.49
$41.49 - $41.49
$41.49
Sold out
Phillips Machine Screw - Oval Head, 5/16"-18 x 1-1/2"
Sold out

Phillips Machine Screw - Oval Head, 5/16"-18 x 1-1/2"

$57.99 - $57.99
$57.99
$57.99 - $57.99
$57.99
Out of stock

Phillips Machine Screw - Oval Head, 5/16"-18 thread, 1-1/2" long. Made from 18-8 stainless steel for corrosion resistance.Compatible Applications G...

View full details
$57.99 - $57.99
$57.99
$57.99 - $57.99
$57.99
Sold out
Phillips Machine Screw - Flat Head, 5/16"-18 x 1-1/4"
Sold out

Phillips Machine Screw - Flat Head, 5/16"-18 x 1-1/4"

$87.39 - $87.39
$87.39
$87.39 - $87.39
$87.39
Out of stock

Phillips machine screw — flat head, 5/16\"-18 thread, 1-1/4\" long. Made from 18-8 stainless steel for corrosion resistance.Compatible Applications...

View full details
$87.39 - $87.39
$87.39
$87.39 - $87.39
$87.39
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 2"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 2"

$45.19 - $45.19
$45.19
$45.19 - $45.19
$45.19
Out of stock

Phillips machine screw with a pan head, 18-8 stainless steel, 10-24 thread, 2" long. This bulk fastener is suitable for general mounting and fasten...

View full details
$45.19 - $45.19
$45.19
$45.19 - $45.19
$45.19
Sold out
Phillips Machine Screw - Oval Head, 10-24 x 1-1/4"
Sold out

Phillips Machine Screw - Oval Head, 10-24 x 1-1/4"

$61.99 - $61.99
$61.99
$61.99 - $61.99
$61.99
Out of stock

18-8 Stainless Steel machine screw with an oval head for flush seating. Size 10-24 x 1-1/4". Compatible Applications: Marine fasteners and mounting...

View full details
$61.99 - $61.99
$61.99
$61.99 - $61.99
$61.99
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 3"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 3"

$72.39 - $72.39
$72.39
$72.39 - $72.39
$72.39
Out of stock

Phillips Machine Screw - Pan Head, 10-24 UNC, 3 in length. Made from 18-8 stainless steel for corrosion resistance.Pan-head machine screw with Phil...

View full details
$72.39 - $72.39
$72.39
$72.39 - $72.39
$72.39
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 2-1/2"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 2-1/2"

$46.59 - $46.59
$46.59
$46.59 - $46.59
$46.59
Out of stock

Phillips machine screw with a pan head. Size #10-24 x 2-1/2 inches. Made from 18-8 stainless steel for corrosion resistance. General fastening for ...

View full details
$46.59 - $46.59
$46.59
$46.59 - $46.59
$46.59
Sold out
Phillips Machine Screw - Oval Head, 5/16"-18 x 2"
Sold out

Phillips Machine Screw - Oval Head, 5/16"-18 x 2"

$82.99 - $82.99
$82.99
$82.99 - $82.99
$82.99
Out of stock

Oval-head Phillips machine screw, 5/16\"-18 thread, 2\" long. Made from 18-8 stainless steel. Parts Desk Insights Best use: general fastening in...

View full details
$82.99 - $82.99
$82.99
$82.99 - $82.99
$82.99
Sold out
Phillips Machine Screw - Pan Head. 5/16"-18 x 3"
Sold out

Phillips Machine Screw - Pan Head. 5/16"-18 x 3"

$53.49 - $53.49
$53.49
$53.49 - $53.49
$53.49
Out of stock

Phillips machine screw, pan head, 5/16-18 x 3 inches. Made from 18-8 stainless steel.Compatible Applications Bulk fastening and mounting projects H...

View full details
$53.49 - $53.49
$53.49
$53.49 - $53.49
$53.49
Sold out
Phillips Machine Screw - Oval Head, 8-32 x 1-1/2"
Sold out

Phillips Machine Screw - Oval Head, 8-32 x 1-1/2"

$70.69 - $70.69
$70.69
$70.69 - $70.69
$70.69
Out of stock

18-8 stainless steel Phillips machine screw with an oval head. 8-32 thread size, 1-1/2" long. Drive: Phillips Head: Oval Thread size: 8-32 Length:...

View full details
$70.69 - $70.69
$70.69
$70.69 - $70.69
$70.69
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 1-3/4"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 1-3/4"

$77.19 - $77.19
$77.19
$77.19 - $77.19
$77.19
Out of stock

Phillips machine screw — pan head, 10-24 x 1-3/4 inches. Made from 18-8 stainless steel for corrosion resistance and durability in bulk fastener ap...

View full details
$77.19 - $77.19
$77.19
$77.19 - $77.19
$77.19
Sold out
Phillips Machine Screw - Oval Head, 8-32 x 2"
Sold out

Phillips Machine Screw - Oval Head, 8-32 x 2"

$28.59 - $28.59
$28.59
$28.59 - $28.59
$28.59
Out of stock

Phillips Machine Screw with oval head and 8-32 thread, made from 18-8 stainless steel. This Phillips-drive fastener is designed for secure, low-pro...

View full details
$28.59 - $28.59
$28.59
$28.59 - $28.59
$28.59
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 1-1/2"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 1-1/2"

$64.59 - $64.59
$64.59
$64.59 - $64.59
$64.59
Out of stock

Phillips machine screw with a pan head, 10-24 x 1-1/2", in 18-8 stainless steel for durable, corrosion-resistant performance. Compatible Applicatio...

View full details
$64.59 - $64.59
$64.59
$64.59 - $64.59
$64.59
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 1-1/4"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 1-1/4"

$64.19 - $64.19
$64.19
$64.19 - $64.19
$64.19
Out of stock

Phillips pan-head machine screw, 10-24 thread, 1-1/4 in long. Made from 18-8 stainless steel for corrosion resistance. General fastening in machine...

View full details
$64.19 - $64.19
$64.19
$64.19 - $64.19
$64.19
Sold out
Phillips Machine Screw - Oval Head, 1/4"-20 x 5"
Sold out

Phillips Machine Screw - Oval Head, 1/4"-20 x 5"

$55.29 - $55.29
$55.29
$55.29 - $55.29
$55.29
Out of stock

Phillips Machine Screw - Oval Head, 1/4-20 x 5 in, 18-8 stainless steel for corrosion resistance.Compatible Applications: Machinery and equipment a...

View full details
$55.29 - $55.29
$55.29
$55.29 - $55.29
$55.29
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 3"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 3"

$48.69 - $48.69
$48.69
$48.69 - $48.69
$48.69
Out of stock

Phillips Machine Screw - Flat Head, 1/4\"-20 x 3\" in 18-8 stainless steel.This machine screw is designed for fastening into pre-tapped holes or nu...

View full details
$48.69 - $48.69
$48.69
$48.69 - $48.69
$48.69
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 4"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 4"

$69.49 - $69.49
$69.49
$69.49 - $69.49
$69.49
Out of stock

Phillips Machine Screw - Flat Head, 1/4" x 4" (1/4"-20 thread). Made from 18-8 stainless steel for corrosion resistance and durability.Compatible A...

View full details
$69.49 - $69.49
$69.49
$69.49 - $69.49
$69.49
Sold out
Phillips Machine Screw - Oval Head, 1/4"-20 x 4"
Sold out

Phillips Machine Screw - Oval Head, 1/4"-20 x 4"

$105.69 - $105.69
$105.69
$105.69 - $105.69
$105.69
Out of stock

Phillips Machine Screw - Oval Head, 1/4\"-20 x 4\". Made from 18-8 stainless steel, this machine screw features a Phillips drive and an oval head.\...

View full details
$105.69 - $105.69
$105.69
$105.69 - $105.69
$105.69
Sold out
Phillips Machine Screw - Oval Head, 8-32 x 1"
Sold out

Phillips Machine Screw - Oval Head, 8-32 x 1"

$44.59 - $44.59
$44.59
$44.59 - $44.59
$44.59
Out of stock

Phillips Machine Screw - Oval Head, 8-32 x 1\" in 18-8 stainless steel. This bulk fastener features a low-profile oval head and a Phillips drive fo...

View full details
$44.59 - $44.59
$44.59
$44.59 - $44.59
$44.59
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 3-1/2"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 3-1/2"

$72.69 - $72.69
$72.69
$72.69 - $72.69
$72.69
Out of stock

Phillips machine screw, flat head, 1/4"-20 thread with a length of 3-1/2". Made from 18-8 stainless steel for corrosion-resistant performance in ap...

View full details
$72.69 - $72.69
$72.69
$72.69 - $72.69
$72.69
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 1"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 1"

$53.79 - $53.79
$53.79
$53.79 - $53.79
$53.79
Out of stock

Phillips machine screw, pan head. Size #10-24 x 1 inch. Material: 18-8 stainless steel, offering corrosion resistance.Compatible Applications Gener...

View full details
$53.79 - $53.79
$53.79
$53.79 - $53.79
$53.79
Sold out
Phillips Machine Screw - Pan Head. 5/16"-18 x 1-1/2"
Sold out

Phillips Machine Screw - Pan Head. 5/16"-18 x 1-1/2"

$103.69 - $103.69
$103.69
$103.69 - $103.69
$103.69
Out of stock

Phillips Machine Screw - Pan Head, 5/16\"-18 x 1-1/2\". Made from 18-8 stainless steel for corrosion resistance and long‑lasting performance.Ideal ...

View full details
$103.69 - $103.69
$103.69
$103.69 - $103.69
$103.69
Sold out
Phillips Machine Screw - Pan Head. 5/16"-18 x 2-1/2"
Sold out

Phillips Machine Screw - Pan Head. 5/16"-18 x 2-1/2"

$26.29 - $26.29
$26.29
$26.29 - $26.29
$26.29
Out of stock

Phillips machine screw with a pan head, 5/16"-18 thread, and 2-1/2" length. Made from 18-8 stainless steel for corrosion resistance in marine and g...

View full details
$26.29 - $26.29
$26.29
$26.29 - $26.29
$26.29
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 2-1/2"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 2-1/2"

$48.69 - $48.69
$48.69
$48.69 - $48.69
$48.69
Out of stock

Phillips machine screw with flat head, 1/4"-20 thread, and 2-1/2" length. Made from 18-8 stainless steel for corrosion resistance, ideal for bulk f...

View full details
$48.69 - $48.69
$48.69
$48.69 - $48.69
$48.69
Sold out
Phillips Machine Screw - Oval Head, 1/4"-20 x 3-1/2"
Sold out

Phillips Machine Screw - Oval Head, 1/4"-20 x 3-1/2"

$98.59 - $98.59
$98.59
$98.59 - $98.59
$98.59
Out of stock

Phillips machine screw with an oval head in 1/4"-20 size and 3-1/2" length. Made from 18-8 stainless steel for corrosion resistance in a variety of...

View full details
$98.59 - $98.59
$98.59
$98.59 - $98.59
$98.59
Sold out
Phillips Machine Screw - Oval Head, 8-32 x 3/4"
Sold out

Phillips Machine Screw - Oval Head, 8-32 x 3/4"

$44.39 - $44.39
$44.39
$44.39 - $44.39
$44.39
Out of stock

Phillips machine screw with oval head, 8-32 thread, 3/4 inch length. Made from 18-8 stainless steel for corrosion resistance in general fastening t...

View full details
$44.39 - $44.39
$44.39
$44.39 - $44.39
$44.39
Sold out
Phillips Machine Screw - Pan Head. 5/16"-18 x 2"
Sold out

Phillips Machine Screw - Pan Head. 5/16"-18 x 2"

$100.19 - $100.19
$100.19
$100.19 - $100.19
$100.19
Out of stock

Durable, corrosion‑resistant Phillips pan-head machine screw crafted from 18‑8 stainless steel. Ideal for metal‑to‑metal fastening in marine and ou...

View full details
$100.19 - $100.19
$100.19
$100.19 - $100.19
$100.19
Sold out
Phillips Machine Screw - Oval Head, 1/4"-20 x 3"
Sold out

Phillips Machine Screw - Oval Head, 1/4"-20 x 3"

$50.69 - $50.69
$50.69
$50.69 - $50.69
$50.69
Out of stock

Phillips machine screw with an oval head. This 1/4\"-20, 3\" long screw is made from 18-8 stainless steel for corrosion resistance.Key features Ova...

View full details
$50.69 - $50.69
$50.69
$50.69 - $50.69
$50.69
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 3/4"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 3/4"

$47.39 - $47.39
$47.39
$47.39 - $47.39
$47.39
Out of stock

Pan head machine screw — 10-24 x 3/4". Made from 18-8 stainless steel for corrosion resistance. Best uses: General purpose fastening for metal-to-m...

View full details
$47.39 - $47.39
$47.39
$47.39 - $47.39
$47.39
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 1-3/4"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 1-3/4"

$76.99 - $76.99
$76.99
$76.99 - $76.99
$76.99
Out of stock

Phillips Machine Screw - Flat Head, 1/4\"-20 x 1-3/4\" in 18-8 stainless steel. This flat-head machine screw is designed for flush mounting in 1/4-...

View full details
$76.99 - $76.99
$76.99
$76.99 - $76.99
$76.99
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 1-1/2"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 1-1/2"

$53.69 - $53.69
$53.69
$53.69 - $53.69
$53.69
Out of stock

Phillips machine screw with a flat head. This fastener features a 1/4"-20 thread and is 1-1/2" long, constructed from 18-8 stainless steel for corr...

View full details
$53.69 - $53.69
$53.69
$53.69 - $53.69
$53.69
Sold out
Phillips Machine Screw - Oval Head, 1/4"-20 x 2-1/2"
Sold out

Phillips Machine Screw - Oval Head, 1/4"-20 x 2-1/2"

$44.39 - $44.39
$44.39
$44.39 - $44.39
$44.39
Out of stock

Phillips machine screw, oval head, 1/4-20 thread, 2-1/2" long. Made from 18-8 stainless steel for corrosion resistance. Key features: Oval-head des...

View full details
$44.39 - $44.39
$44.39
$44.39 - $44.39
$44.39
Sold out
Phillips Machine Screw - Oval Head, 1/4"-20 x 2"
Sold out

Phillips Machine Screw - Oval Head, 1/4"-20 x 2"

$74.19 - $74.19
$74.19
$74.19 - $74.19
$74.19
Out of stock

Phillips Machine Screw - Oval Head, 1/4\"-20 x 2\".Material: 18-8 stainless steel.Bulk fastener with a Phillips drive and oval head for use in asse...

View full details
$74.19 - $74.19
$74.19
$74.19 - $74.19
$74.19
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 5/8"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 5/8"

$94.69 - $94.69
$94.69
$94.69 - $94.69
$94.69
Out of stock

Phillips machine screw with a pan head, size 10-24 x 5/8\". Made from 18-8 stainless steel for corrosion resistance.Compatible Applications General...

View full details
$94.69 - $94.69
$94.69
$94.69 - $94.69
$94.69
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 2"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 2"

$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
Out of stock

Flat head Phillips machine screw, 1/4"-20 x 2". Made from 18-8 stainless steel for corrosion resistance. Flat head, Phillips drive Thread size: 1/4...

View full details
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
Sold out
Phillips Machine Screw - Pan Head. 10-24 x 3/8"
Sold out

Phillips Machine Screw - Pan Head. 10-24 x 3/8"

$75.99 - $75.99
$75.99
$75.99 - $75.99
$75.99
Out of stock

Phillips machine screw with a pan head. Size 10-24 x 3/8 in. Made from 18-8 stainless steel for corrosion resistance. Bulk fasteners and mounting h...

View full details
$75.99 - $75.99
$75.99
$75.99 - $75.99
$75.99
Sold out
Phillips Machine Screw - Flat Head, 1/4"-20 x 1-1/4"
Sold out

Phillips Machine Screw - Flat Head, 1/4"-20 x 1-1/4"

$45.49 - $45.49
$45.49
$45.49 - $45.49
$45.49
Out of stock

Phillips Machine Screw - Flat Head, 1/4\"-20 x 1-1/4\" (18-8 stainless steel). Material: 18-8 stainless steel for corrosion resistance. Flat-head P...

View full details
$45.49 - $45.49
$45.49
$45.49 - $45.49
$45.49
Sold out