Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Fasteners & Mounting

Marine Hardware & Installation

Marine Fasteners, Mounting Hardware & Installation Supplies

Shop marine-grade screws, bolts, nuts, washers, brackets, backing plates, rivets, mounting pads, sealants, thread lockers, and anti-seize for secure hardware installations in saltwater environments.

Shop Fasteners & Mounting Stainless Screws Mounting Brackets
Install Check

Match metal grade, fastener size, thread type, backing support, bedding compound, and load direction before drilling into the boat.

Shop Backing Plates

Use marine-grade hardware and proper sealing practices. Confirm load ratings, material compatibility, corrosion risk, deck core protection, and manufacturer instructions before installation.

Quick ShopFitmentHardware TypesInstall NotesInspectionFAQDeck HardwareTools

Fitment

Choose the Right Metal, Size, and Support

Marine fasteners need to match the job. Consider stainless grade, length, diameter, head style, thread type, washer size, backing plate needs, and whether the hardware is loaded in pull, shear, or vibration.

316 Stainless 304 Stainless Threaded Rod

Corrosion

Saltwater Hardware Needs Material Discipline

316 stainless is commonly preferred for saltwater exposure, while 304 stainless may suit freshwater or less demanding areas. Isolate dissimilar metals where needed and use anti-seize on stainless threads to reduce galling.

If a fastener is structural or safety-critical, confirm the correct grade, torque, backing, and installation method.

SS

Stainless Fasteners

Screws, bolts, nuts, washers, threaded rod, lock nuts, and specialty head styles for marine repair and upgrades.

MNT

Mounting Hardware

Brackets, bases, pads, backing plates, antenna mounts, rod holder mounts, and accessory supports.

BED

Bedding & Bonding

Sealants, adhesives, thread lockers, anti-seize, and bedding compounds help hardware stay secure and watertight.

Install Notes

Seal Holes and Spread Loads

Fastener selection is only part of the job. Hardware installed through decks, cabins, rails, transoms, or cored panels needs the right pilot hole, sealant, backing, washer, and torque.

Pilot holesUse the correct drill size for the fastener, substrate, and thread engagement.
Bedding compoundSeal penetrations to keep water out of cores, cabins, lockers, and electronics areas.
Backing platesSpread loads for cleats, davits, ladders, rails, seats, and high-load deck hardware.
Thread careUse thread locker or anti-seize where appropriate, especially on stainless-to-stainless threads.

Inspection

Replace Corroded, Loose, or Mismatched Hardware

Check for rust streaks, loose brackets, elongated holes, cracked sealant, missing washers, galvanic corrosion, stripped threads, and water intrusion around mounted hardware.

Washers Nuts Adhesives

Projects

Good Hardware Makes Upgrades Last

Electronics, antennas, cleats, rod holders, seats, speakers, lights, ladders, hatches, and deck fittings all rely on correctly chosen mounting hardware.

For heavy or safety-related gear, do a dry fit, mark hole locations carefully, and confirm access to the backside before drilling.

FAQ

Marine Fastener Questions

Should I use 304 or 316 stainless fasteners on a boat?

316 stainless is usually preferred for saltwater and exposed marine use because it has stronger corrosion resistance. 304 stainless can be suitable for freshwater or less exposed applications.

Why do stainless fasteners seize or gall?

Stainless threads can gall when tightened under friction, especially stainless-on-stainless. Anti-seize, correct thread engagement, and careful tightening can help reduce the risk.

When do I need a backing plate?

Use backing plates when hardware carries significant load, such as cleats, rails, ladders, davits, seats, and deck fittings. Backing plates spread load and help prevent crushing or pull-through.

Should deck fasteners be sealed?

Yes. Holes through decks, cabins, and cored panels should be sealed with the correct marine bedding compound to help prevent leaks and core damage.

Ready for a Stronger Install?

Shop Marine Fasteners, Brackets, Backing Plates & Sealants

Search by fastener type, material, size, head style, mounting application, sealant need, bracket type, or installation project.

Shop Fasteners & Mounting Backing Plates Sealants

Filters

Cap Screw - Hex Head, 1/2"-13 x 2-1/2" Sold out

Cap Screw - Hex Head, 1/2"-13 x 2-1/2"

$89.09 - $89.09
$89.09
$89.09 - $89.09
$89.09
Out of stock

Cap Screw - Hex Head, 1/2"-13 x 2-1/2". Made from 18-8 stainless steel for corrosion resistance and long service life in a variety of environments....

View full details
$89.09 - $89.09
$89.09
$89.09 - $89.09
$89.09
Sold out
Lag Screw, 1/2 x 3-1/2" Sold out

Lag Screw, 1/2 x 3-1/2"

$12.19 - $12.19
$12.19
$12.19 - $12.19
$12.19
Out of stock

Lag screw, 1/2 x 3-1/2 inches, crafted from 18-8 stainless steel for corrosion resistance in outdoor and marine environments. Wood-to-wood faste...

View full details
$12.19 - $12.19
$12.19
$12.19 - $12.19
$12.19
Sold out
Carriage Bolt, 3/8"-16 x 4" Sold out

Carriage Bolt, 3/8"-16 x 4"

$80.29 - $80.29
$80.29
$80.29 - $80.29
$80.29
Out of stock

Carriage Bolt, 3/8\"-16 x 4\" in 18-8 stainless steel (304). The rounded head provides a clean finish and the square neck helps prevent turning dur...

View full details
$80.29 - $80.29
$80.29
$80.29 - $80.29
$80.29
Sold out
Lag Screw, 1/2 x 3" Sold out

Lag Screw, 1/2 x 3"

$51.17 - $51.17
$51.17
$51.17 - $51.17
$51.17
Out of stock

Lag Screw, 1/2 x 3". Made from 18-8 stainless steel, this lag screw provides reliable corrosion resistance for wood fastening projects.Parts Desk I...

View full details
$51.17 - $51.17
$51.17
$51.17 - $51.17
$51.17
Sold out
Cap Screw - Hex Head, 1/2"-13 x 3"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 3"

$87.29 - $87.29
$87.29
$87.29 - $87.29
$87.29
Out of stock

Cap screw with hex head, 1/2"-13 x 3". Made from 18-8 stainless steel for corrosion resistance and durable performance in demanding environments.Co...

View full details
$87.29 - $87.29
$87.29
$87.29 - $87.29
$87.29
Sold out
Cap Screw - Hex Head, 5/16"-18 x 3/4"
Sold out

Cap Screw - Hex Head, 5/16"-18 x 3/4"

$35.29 - $35.29
$35.29
$35.29 - $35.29
$35.29
Out of stock

Cap Screw with Hex Head in size 5/16\"-18 by 3/4\" (thread: 5/16-18).Made from 18-8 stainless steel for corrosion resistance, ideal for bulk fasten...

View full details
$35.29 - $35.29
$35.29
$35.29 - $35.29
$35.29
Sold out
Cap Screw - Hex Head, 5/16"-18 x 1"
Sold out

Cap Screw - Hex Head, 5/16"-18 x 1"

$37.19 - $37.19
$37.19
$37.19 - $37.19
$37.19
Out of stock

Cap Screw - Hex Head, 5/16\"-18 x 1\". Made from 18-8 stainless steel for reliable corrosion resistance. Hex-head cap screw size 5/16\"-18 with 1\"...

View full details
$37.19 - $37.19
$37.19
$37.19 - $37.19
$37.19
Sold out
Cap Screw - Hex Head, 1/2"-13 x 1-3/4"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 1-3/4"

$80.39 - $80.39
$80.39
$80.39 - $80.39
$80.39
Out of stock

Cap Screw with hex head, 1/2"-13 thread, and 1-3/4" length. Made from 18-8 stainless steel for durable corrosion resistance.Details Hex he...

View full details
$80.39 - $80.39
$80.39
$80.39 - $80.39
$80.39
Sold out
Cap Screw - Hex Head, 1/2"-13 x 2"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 2"

$70.39 - $70.39
$70.39
$70.39 - $70.39
$70.39
Out of stock

Hex head cap screw crafted from 18-8 stainless steel for reliable, corrosion-resistant fastening in bulk fastener projects.Designed for general mou...

View full details
$70.39 - $70.39
$70.39
$70.39 - $70.39
$70.39
Sold out
Lag Screw, 3/8 x 6"
Sold out

Lag Screw, 3/8 x 6"

$46.29 - $46.29
$46.29
$46.29 - $46.29
$46.29
Out of stock

Lag Screw, 3/8 x 6" in 18-8 stainless steel for durable, corrosion-resistant fastening in wood-to-wood applications. Decks, outdoor structures, and...

View full details
$46.29 - $46.29
$46.29
$46.29 - $46.29
$46.29
Sold out
Carriage Bolt, 3/8"-16 x 3"
Sold out

Carriage Bolt, 3/8"-16 x 3"

$51.09 - $51.09
$51.09
$51.09 - $51.09
$51.09
Out of stock

Carriage Bolt, 3/8-16 x 3" made from 18-8 stainless steel for corrosion resistance in challenging environments.Ideal for bulk fastener needs in mar...

View full details
$51.09 - $51.09
$51.09
$51.09 - $51.09
$51.09
Sold out
Cap Screw - Hex Head, 5/16"-18 x 1/2"
Sold out

Cap Screw - Hex Head, 5/16"-18 x 1/2"

$62.69 - $62.69
$62.69
$62.69 - $62.69
$62.69
Out of stock

Hex head cap screw in 18-8 stainless steel for durable, corrosion-resistant fastening. Size 5/16\"-18 x 1/2\" (thread 5/16\"-18, length 1/2\").Idea...

View full details
$62.69 - $62.69
$62.69
$62.69 - $62.69
$62.69
Sold out
Lag Screw, 3/8 x 4"
Sold out

Lag Screw, 3/8 x 4"

$66.89 - $66.89
$66.89
$66.89 - $66.89
$66.89
Out of stock

Made from 18-8 stainless steel, this bulk lag screw delivers dependable strength and corrosion resistance for outdoor and marine wood fastening. Su...

View full details
$66.89 - $66.89
$66.89
$66.89 - $66.89
$66.89
Sold out
Lag Screw, 3/8 x 3-1/2"
Sold out

Lag Screw, 3/8 x 3-1/2"

$150.29 - $150.29
$150.29
$150.29 - $150.29
$150.29
Out of stock

Lag Screw, 3/8 x 3-1/2 in. Constructed from 18-8 stainless steel for corrosion resistance in outdoor and damp environments.Key characteristics: 3/8...

View full details
$150.29 - $150.29
$150.29
$150.29 - $150.29
$150.29
Sold out
Lag Screw, 3/8 x 5"
Sold out

Lag Screw, 3/8 x 5"

$52.39 - $52.39
$52.39
$52.39 - $52.39
$52.39
Out of stock

Lag Screw, 3/8 x 5". Constructed from 18-8 stainless steel for durable, corrosion-resistant performance in outdoor and marine environments.Compatib...

View full details
$52.39 - $52.39
$52.39
$52.39 - $52.39
$52.39
Sold out
Cap Screw - Hex Head, 1/2"-13 x 1-1/2"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 1-1/2"

$63.19 - $63.19
$63.19
$63.19 - $63.19
$63.19
Out of stock

Hex head cap screw with 1/2\"-13 threads and 1-1/2\" length. Constructed from 18-8 stainless steel for durability and corrosion resistance.Compatib...

View full details
$63.19 - $63.19
$63.19
$63.19 - $63.19
$63.19
Sold out
Cap Screw - Hex Head, 1/2"-13 x 1"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 1"

$50.49 - $50.49
$50.49
$50.49 - $50.49
$50.49
Out of stock

Cap Screw - Hex Head, 1/2\"-13 x 1\" in 18-8 stainless steel for durability in damp or exposed environments.Details Thread size: 1/2\"-13 Length: 1...

View full details
$50.49 - $50.49
$50.49
$50.49 - $50.49
$50.49
Sold out
Phillips Machine Screw - Flat Head, 10-24 x 1-1/2"
Sold out

Phillips Machine Screw - Flat Head, 10-24 x 1-1/2"

$78.89 - $78.89
$78.89
$78.89 - $78.89
$78.89
Out of stock

Phillips machine screw with a flat head, 10-24 thread, and a length of 1-1/2 inches. Made from 18-8 stainless steel for corrosion resistance and du...

View full details
$78.89 - $78.89
$78.89
$78.89 - $78.89
$78.89
Sold out
Cap Screw - Hex Head, 1/2"-13 x 1-1/4"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 1-1/4"

$49.09 - $49.09
$49.09
$49.09 - $49.09
$49.09
Out of stock

Cap Screw - Hex Head, 1/2"-13 x 1-1/4". Crafted in 18-8 stainless steel for durable corrosion resistance in outdoor and marine environments. Thread...

View full details
$49.09 - $49.09
$49.09
$49.09 - $49.09
$49.09
Sold out
Phillips Machine Screw - Flat Head, 10-24 x 2"
Sold out

Phillips Machine Screw - Flat Head, 10-24 x 2"

$46.99 - $46.99
$46.99
$46.99 - $46.99
$46.99
Out of stock

Flat-head Phillips machine screw, #10-24 thread, 2 in long. Made from 18-8 stainless steel for corrosion resistance and durable performance in a ra...

View full details
$46.99 - $46.99
$46.99
$46.99 - $46.99
$46.99
Sold out
Cap Screw - Hex Head, 1/4"-20 x 4"
Sold out

Cap Screw - Hex Head, 1/4"-20 x 4"

$156.29 - $156.29
$156.29
$156.29 - $156.29
$156.29
Out of stock

Hex head cap screw in 18-8 stainless steel. Size: 1/4\"-20 thread, 4\" long. Provides durable, corrosion-resistant fastening for general applicatio...

View full details
$156.29 - $156.29
$156.29
$156.29 - $156.29
$156.29
Sold out
Lag Screw, 3/8 x 2-1/2"
Sold out

Lag Screw, 3/8 x 2-1/2"

$49.89 - $49.89
$49.89
$49.89 - $49.89
$49.89
Out of stock

Lag Screw, 3/8 x 2-1/2 inches, crafted from 18-8 stainless steel for durable corrosion resistance in outdoor environments. Size: 3/8 in diameter...

View full details
$49.89 - $49.89
$49.89
$49.89 - $49.89
$49.89
Sold out
Phillips Machine Screw - Flat Head, 10-24 x 1-1/4"
Sold out

Phillips Machine Screw - Flat Head, 10-24 x 1-1/4"

$69.59 - $69.59
$69.59
$69.59 - $69.59
$69.59
Out of stock

Flat-head machine screw in 18-8 stainless steel for corrosion resistance in a variety of fastening projects. Phillips drive; size 10-24 x 1-1/4"Com...

View full details
$69.59 - $69.59
$69.59
$69.59 - $69.59
$69.59
Sold out
Cap Screw - Hex Head, 1/2"-13 x 3/4"
Sold out

Cap Screw - Hex Head, 1/2"-13 x 3/4"

$78.29 - $78.29
$78.29
$78.29 - $78.29
$78.29
Out of stock

Cap Screw - Hex Head, 1/2"-13 x 3/4". 18-8 Stainless Steel. General-purpose bulk fasteners for mounting hardware Suitable for marine and outdoor in...

View full details
$78.29 - $78.29
$78.29
$78.29 - $78.29
$78.29
Sold out
Cap Screw - Hex Head, 7/16"-14 x 3"

Cap Screw - Hex Head, 7/16"-14 x 3"

$65.49 - $65.49
$65.49
$65.49 - $65.49
$65.49
Item locally warehoused

A durable 18-8 stainless steel hex head cap screw for secure, reliable fastening in marine and general-use applications where corrosion resistance ...

View full details
$65.49 - $65.49
$65.49
$65.49 - $65.49
$65.49
Lag Screw, 3/8 x 3"
Sold out

Lag Screw, 3/8 x 3"

$56.59 - $56.59
$56.59
$56.59 - $56.59
$56.59
Out of stock

Lag Screw, 3/8 in diameter by 3 in long, constructed from 18-8 stainless steel for corrosion resistance.Ideal for timber-to-timber connections in o...

View full details
$56.59 - $56.59
$56.59
$56.59 - $56.59
$56.59
Sold out
Phillips Machine Screw - Flat Head, 10-24 x 1"

Phillips Machine Screw - Flat Head, 10-24 x 1"

$54.29 - $54.29
$54.29
$54.29 - $54.29
$54.29
Item locally warehoused

Secure marine and general fastening applications with this Phillips machine screw featuring a flat head profile and 10-24 thread size for a neat, f...

View full details
$54.29 - $54.29
$54.29
$54.29 - $54.29
$54.29
Cap Screw - Hex Head, 7/16"-14 x 4"
Sold out

Cap Screw - Hex Head, 7/16"-14 x 4"

$39.19 - $39.19
$39.19
$39.19 - $39.19
$39.19
Out of stock

Cap Screw - Hex Head, 7/16\"-14 x 4\" in 18-8 stainless steel for corrosion resistance and durable use. Size: 7/16\"-14 thread Length: 4\" Head sty...

View full details
$39.19 - $39.19
$39.19
$39.19 - $39.19
$39.19
Sold out
Lag Screw, 3/8 x 1"

Lag Screw, 3/8 x 1"

$64.49 - $64.49
$64.49
$64.49 - $64.49
$64.49
Item locally warehoused

Secure mounting starts with the right fastener. This lag screw is a 3/8 in. x 1 in. stainless steel hex-head lag screw made from 18-8 stainless ste...

View full details
$64.49 - $64.49
$64.49
$64.49 - $64.49
$64.49
Lag Screw, 3/8 x 2"

Lag Screw, 3/8 x 2"

$103.59 - $103.59
$103.59
$103.59 - $103.59
$103.59
Item locally warehoused

A durable 3/8" x 2" lag screw made from 18-8 stainless steel for fastening applications in marine and general hardware use. Key Features Size: 3/8...

View full details
$103.59 - $103.59
$103.59
$103.59 - $103.59
$103.59
Lag Screw, 3/8 x 1-1/2"

Lag Screw, 3/8 x 1-1/2"

$52.19 - $52.19
$52.19
$52.19 - $52.19
$52.19
Item locally warehoused

Secure marine hardware fast with this 3/8 x 1-1/2" lag screw made from 18-8 stainless steel. Ideal for fastening into wood or similar structural ma...

View full details
$52.19 - $52.19
$52.19
$52.19 - $52.19
$52.19
Cap Screw - Hex Head, 7/16"-14 x 3-1/2"
Sold out

Cap Screw - Hex Head, 7/16"-14 x 3-1/2"

$32.59 - $32.59
$32.59
$32.59 - $32.59
$32.59
Out of stock

Cap Screw with a hex head for reliable driving in bulk-fastener applications. This 7/16"-14 thread cap screw measures 3-1/2" in length and is made ...

View full details
$32.59 - $32.59
$32.59
$32.59 - $32.59
$32.59
Sold out
Phillips Machine Screw - Flat Head, 10-24 x 3/4"

Phillips Machine Screw - Flat Head, 10-24 x 3/4"

$36.39 - $36.39
$36.39
$36.39 - $36.39
$36.39
Item locally warehoused

Phillips Machine Screw with a flat head for secure fastening with a #10-24 thread and 3/4" length. Made from 18-8 stainless steel for corrosion res...

View full details
$36.39 - $36.39
$36.39
$36.39 - $36.39
$36.39
Phillips Machine Screw - Flat Head, 10-24 x 1/2"

Phillips Machine Screw - Flat Head, 10-24 x 1/2"

$34.49 - $34.49
$34.49
$34.49 - $34.49
$34.49
Item locally warehoused

Phillips machine screw with a flat head for clean, flush-style fastening. Built with 18-8 stainless steel corrosion resistance for marine and outdo...

View full details
$34.49 - $34.49
$34.49
$34.49 - $34.49
$34.49
Cap Screw - Hex Head, 7/16"-14 x 2"

Cap Screw - Hex Head, 7/16"-14 x 2"

$74.19 - $74.19
$74.19
$74.19 - $74.19
$74.19
Item locally warehoused

Cap Screw - Hex Head, 7/16"-14 x 2" (50-00069) built for marine fastener applications where corrosion resistance matters. Made from 18-8 stainless ...

View full details
$74.19 - $74.19
$74.19
$74.19 - $74.19
$74.19
Cap Screw - Hex Head, 1/4"-20 x 2-1/2"

Cap Screw - Hex Head, 1/4"-20 x 2-1/2"

$39.99 - $39.99
$39.99
$39.99 - $39.99
$39.99
Item locally warehoused

Use this hex head cap screw for secure fastening in marine and general hardware applications where a 1/4"-20 thread and 2-1/2" length are required....

View full details
$39.99 - $39.99
$39.99
$39.99 - $39.99
$39.99
Cap Screw - Hex Head, 1/4"-20 x 3"

Cap Screw - Hex Head, 1/4"-20 x 3"

$63.79 - $63.79
$63.79
$63.79 - $63.79
$63.79
Item locally warehoused

A hex head cap screw sized 1/4"-20 x 3" with 18-8 stainless steel construction for dependable corrosion resistance on marine and outdoor hardware p...

View full details
$63.79 - $63.79
$63.79
$63.79 - $63.79
$63.79
Cap Screw - Hex Head, 1/4"-20 x 1-1/2"

Cap Screw - Hex Head, 1/4"-20 x 1-1/2"

$59.29 - $59.29
$59.29
$59.29 - $59.29
$59.29
Item locally warehoused

Secure and stabilize marine and general mounting applications with this 18-8 stainless steel hex head cap screw (1/4"-20 x 1-1/2"). Designed for re...

View full details
$59.29 - $59.29
$59.29
$59.29 - $59.29
$59.29
Cap Screw - Hex Head, 7/16"-14 x 2-1/2"

Cap Screw - Hex Head, 7/16"-14 x 2-1/2"

$75.39 - $75.39
$75.39
$75.39 - $75.39
$75.39
Item locally warehoused

A hex head cap screw sized for dependable marine-grade fastening—7/16"-14 x 2-1/2" in 18-8 stainless steel. Key Features Hex head cap screw for se...

View full details
$75.39 - $75.39
$75.39
$75.39 - $75.39
$75.39
Cap Screw - Hex Head, 1/4"-20 x 2"

Cap Screw - Hex Head, 1/4"-20 x 2"

$95.29 - $95.29
$95.29
$95.29 - $95.29
$95.29
Item locally warehoused

A hex head cap screw designed for marine-style fastening needs—built with 18-8 stainless steel for corrosion resistance. Key Features Hex head des...

View full details
$95.29 - $95.29
$95.29
$95.29 - $95.29
$95.29
Lag Screw, 5/16 x 2-1/2"

Lag Screw, 5/16 x 2-1/2"

$23.19 - $23.19
$23.19
$23.19 - $23.19
$23.19
Item locally warehoused

A durable 18-8 stainless steel lag screw for fastening marine and hardware projects—ideal when corrosion resistance matters. Key Features Bulk fas...

View full details
$23.19 - $23.19
$23.19
$23.19 - $23.19
$23.19
Cap Screw - Hex Head, 1/4-20 x 1"

Cap Screw - Hex Head, 1/4-20 x 1"

$100.79 - $100.79
$100.79
$100.79 - $100.79
$100.79
Item locally warehoused

Cap Screw - Hex Head, 1/4-20 x 1" is a stainless-steel hex-head fastener designed for secure fastening in marine and general hardware applications ...

View full details
$100.79 - $100.79
$100.79
$100.79 - $100.79
$100.79
Cap Screw - Hex Head, 7/16"-14 x 1"

Cap Screw - Hex Head, 7/16"-14 x 1"

$38.79 - $38.79
$38.79
$38.79 - $38.79
$38.79
Item locally warehoused

A reliable hex head cap screw for marine hardware and general fastener replacement, sized 7/16"-14 x 1" and made from 18-8 stainless steel for corr...

View full details
$38.79 - $38.79
$38.79
$38.79 - $38.79
$38.79
Cap Screw - Hex Head, 7/16"-14 x 1-1/2"

Cap Screw - Hex Head, 7/16"-14 x 1-1/2"

$44.79 - $44.79
$44.79
$44.79 - $44.79
$44.79
Item locally warehoused

Fasten securely with this Seachoice hex head cap screw in 18-8 stainless steel, sized 7/16"-14 x 1-1/2" for reliable, corrosion-resistant fastening...

View full details
$44.79 - $44.79
$44.79
$44.79 - $44.79
$44.79
Cap Screw - Hex Head, 7/16"-14 x 1-1/4"

Cap Screw - Hex Head, 7/16"-14 x 1-1/4"

$36.19 - $36.19
$36.19
$36.19 - $36.19
$36.19
Item locally warehoused

A durable hex head cap screw sized for fastening applications where 18-8 stainless steel corrosion resistance is desired. Key Features Hex head ca...

View full details
$36.19 - $36.19
$36.19
$36.19 - $36.19
$36.19
Phillips Machine Screw - Flat Head, 8-32 x 1-1/2"

Phillips Machine Screw - Flat Head, 8-32 x 1-1/2"

$61.89 - $61.89
$61.89
$61.89 - $61.89
$61.89
Item locally warehoused

A Phillips flat-head machine screw in 8-32 x 1-1/2", made from 18-8 stainless steel for durable, corrosion-resistant fastening. Key Features Phill...

View full details
$61.89 - $61.89
$61.89
$61.89 - $61.89
$61.89
Cap Screw - Hex Head, 1/4"-20 x 1-1/4"

Cap Screw - Hex Head, 1/4"-20 x 1-1/4"

$50.99 - $50.99
$50.99
$50.99 - $50.99
$50.99
Item locally warehoused

This Seachoice hex head cap screw (1/4"-20 x 1-1/4") is made from 18-8 stainless steel—an excellent choice for marine and exterior fastening where ...

View full details
$50.99 - $50.99
$50.99
$50.99 - $50.99
$50.99
Lag Screw, 5/16 x 3"

Lag Screw, 5/16 x 3"

$33.79 - $33.79
$33.79
$33.79 - $33.79
$33.79
Item locally warehoused

Secure marine and outdoor mounting with this 5/16 x 3" lag screw made from 18-8 stainless steel. Designed for strong fastening where corrosion resi...

View full details
$33.79 - $33.79
$33.79
$33.79 - $33.79
$33.79