Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Fasteners & Mounting

Marine Hardware & Installation

Marine Fasteners, Mounting Hardware & Installation Supplies

Shop marine-grade screws, bolts, nuts, washers, brackets, backing plates, rivets, mounting pads, sealants, thread lockers, and anti-seize for secure hardware installations in saltwater environments.

Shop Fasteners & Mounting Stainless Screws Mounting Brackets
Install Check

Match metal grade, fastener size, thread type, backing support, bedding compound, and load direction before drilling into the boat.

Shop Backing Plates

Use marine-grade hardware and proper sealing practices. Confirm load ratings, material compatibility, corrosion risk, deck core protection, and manufacturer instructions before installation.

Quick ShopFitmentHardware TypesInstall NotesInspectionFAQDeck HardwareTools

Fitment

Choose the Right Metal, Size, and Support

Marine fasteners need to match the job. Consider stainless grade, length, diameter, head style, thread type, washer size, backing plate needs, and whether the hardware is loaded in pull, shear, or vibration.

316 Stainless 304 Stainless Threaded Rod

Corrosion

Saltwater Hardware Needs Material Discipline

316 stainless is commonly preferred for saltwater exposure, while 304 stainless may suit freshwater or less demanding areas. Isolate dissimilar metals where needed and use anti-seize on stainless threads to reduce galling.

If a fastener is structural or safety-critical, confirm the correct grade, torque, backing, and installation method.

SS

Stainless Fasteners

Screws, bolts, nuts, washers, threaded rod, lock nuts, and specialty head styles for marine repair and upgrades.

MNT

Mounting Hardware

Brackets, bases, pads, backing plates, antenna mounts, rod holder mounts, and accessory supports.

BED

Bedding & Bonding

Sealants, adhesives, thread lockers, anti-seize, and bedding compounds help hardware stay secure and watertight.

Install Notes

Seal Holes and Spread Loads

Fastener selection is only part of the job. Hardware installed through decks, cabins, rails, transoms, or cored panels needs the right pilot hole, sealant, backing, washer, and torque.

Pilot holesUse the correct drill size for the fastener, substrate, and thread engagement.
Bedding compoundSeal penetrations to keep water out of cores, cabins, lockers, and electronics areas.
Backing platesSpread loads for cleats, davits, ladders, rails, seats, and high-load deck hardware.
Thread careUse thread locker or anti-seize where appropriate, especially on stainless-to-stainless threads.

Inspection

Replace Corroded, Loose, or Mismatched Hardware

Check for rust streaks, loose brackets, elongated holes, cracked sealant, missing washers, galvanic corrosion, stripped threads, and water intrusion around mounted hardware.

Washers Nuts Adhesives

Projects

Good Hardware Makes Upgrades Last

Electronics, antennas, cleats, rod holders, seats, speakers, lights, ladders, hatches, and deck fittings all rely on correctly chosen mounting hardware.

For heavy or safety-related gear, do a dry fit, mark hole locations carefully, and confirm access to the backside before drilling.

FAQ

Marine Fastener Questions

Should I use 304 or 316 stainless fasteners on a boat?

316 stainless is usually preferred for saltwater and exposed marine use because it has stronger corrosion resistance. 304 stainless can be suitable for freshwater or less exposed applications.

Why do stainless fasteners seize or gall?

Stainless threads can gall when tightened under friction, especially stainless-on-stainless. Anti-seize, correct thread engagement, and careful tightening can help reduce the risk.

When do I need a backing plate?

Use backing plates when hardware carries significant load, such as cleats, rails, ladders, davits, seats, and deck fittings. Backing plates spread load and help prevent crushing or pull-through.

Should deck fasteners be sealed?

Yes. Holes through decks, cabins, and cored panels should be sealed with the correct marine bedding compound to help prevent leaks and core damage.

Ready for a Stronger Install?

Shop Marine Fasteners, Brackets, Backing Plates & Sealants

Search by fastener type, material, size, head style, mounting application, sealant need, bracket type, or installation project.

Shop Fasteners & Mounting Backing Plates Sealants

Filters

Sea-Dog 0804881 Eye Bolt w/Shoulder, 5/8" I.D.

Sea-Dog 0804881 Eye Bolt w/Shoulder, 5/8" I.D.

$41.79 - $41.79
$41.79
$41.79 - $41.79
$41.79
Item locally warehoused

Corrosion resistant machined 304 stainless steel w/metric threads.Designed to take inline loads, shouldered eyebolts can handle limited side loadin...

View full details
$41.79 - $41.79
$41.79
$41.79 - $41.79
$41.79
Sea-Dog 0812801 Pad Eye, 1 pr.

Sea-Dog 0812801 Pad Eye, 1 pr.

$23.49 - $23.49
$23.49
$23.49 - $23.49
$23.49
Item locally warehoused

Polished cast brass pad eye can be used for a variety of applications both decorative and functional. Great for block attachment, controlling lead ...

View full details
$23.49 - $23.49
$23.49
$23.49 - $23.49
$23.49
Sea-Dog 0804831 Eye Bolt w/Shoulder, 9/16" I.D.

Sea-Dog 0804831 Eye Bolt w/Shoulder, 9/16" I.D.

$38.09 - $38.09
$38.09
$38.09 - $38.09
$38.09
Item locally warehoused

Corrosion resistant machined 304 stainless steel w/metric threads.Designed to take inline loads, shouldered eyebolts can handle limited side loadin...

View full details
$38.09 - $38.09
$38.09
$38.09 - $38.09
$38.09
Sea-Dog 0804661 Eye Bolt w/Shoulder, 1/2" I.D.

Sea-Dog 0804661 Eye Bolt w/Shoulder, 1/2" I.D.

$36.49 - $36.49
$36.49
$36.49 - $36.49
$36.49
Item locally warehoused

Corrosion resistant machined 304 stainless steel w/metric threads.Designed to take inline loads, shouldered eyebolts can handle limited side loadin...

View full details
$36.49 - $36.49
$36.49
$36.49 - $36.49
$36.49
Sea-Dog 081270 Pad Eye Bronze 5/16"

Sea-Dog 081270 Pad Eye Bronze 5/16"

$3.99 - $3.99
$3.99
$3.99 - $3.99
$3.99
Item locally warehoused

Forged bronze wire.

$3.99 - $3.99
$3.99
$3.99 - $3.99
$3.99
Seachoice Replacement Handle Only For Select Hatches - Clear

Seachoice Replacement Hatch Handle – Clear

$13.19 - $13.19
$13.19
$13.19 - $13.19
$13.19
Item locally warehoused

Seachoice Replacement Hatch Handle – ClearKeep your deck hatches fully functional with this direct-fit replacement handle from Seachoice. Designed ...

View full details
$13.19 - $13.19
$13.19
$13.19 - $13.19
$13.19
Sea-Dog 0812701 Pad Eye 5/16" Bronze, 1 pr.

Sea-Dog 0812701 Pad Eye 5/16" Bronze, 1 pr.

$9.99 - $9.99
$9.99
$9.99 - $9.99
$9.99
Item locally warehoused

Forged bronze wire.

$9.99 - $9.99
$9.99
$9.99 - $9.99
$9.99
Seachoice Replacement Gas Fill Cap, Non-Locking

Seachoice Non-Locking Replacement Gas Fill Cap (50-32501)

$18.11 - $18.11
$18.11
$18.11 - $18.11
$18.11
Item locally warehoused

The Seachoice 50-32501 Replacement Gas Fill Cap is a direct-fit non-locking cap for deck mount fuel fill plates. Made from durable black plastic th...

View full details
$18.11 - $18.11
$18.11
$18.11 - $18.11
$18.11
Seachoice Replacement Gas Fill Cap, Cast Stainless Steel

Seachoice Cast Stainless Steel Locking Gas Fill Cap with Key & Tether (50-32551)

$33.91 - $33.91
$33.91
$33.91 - $33.91
$33.91
Item locally warehoused

The Seachoice 50-32551 Replacement Gas Fill Cap is a cast stainless steel locking cap designed for Seachoice 32251, 32261, 32271, and 32281 series ...

View full details
$33.91 - $33.91
$33.91
$33.91 - $33.91
$33.91
Sea-Dog 0804631 Eye Bolt w/Shoulder, 1/2" I.D.

Sea-Dog 0804631 Eye Bolt w/Shoulder, 1/2" I.D.

$34.69 - $34.69
$34.69
$34.69 - $34.69
$34.69
Item locally warehoused

Corrosion resistant machined 304 stainless steel w/metric threads.Designed to take inline loads, shouldered eyebolts can handle limited side loadin...

View full details
$34.69 - $34.69
$34.69
$34.69 - $34.69
$34.69

Beckson 6" Replacement O-Ring for Screw-Out Deck Plate

$9.29 - $9.29
$9.29
$9.29 - $9.29
$9.29
Item locally warehoused

Beckson 6" Replacement O-Ring for Screw-Out Deck PlateKeep your Beckson 6" screw-out deck plate watertight with this direct-fit replacement O-ring....

View full details
$9.29 - $9.29
$9.29
$9.29 - $9.29
$9.29
Water Deck Plate Cap Black

Perko Water Deck Fill Cap – Black

$44.99 - $44.99
$44.99
$44.99 - $44.99
$44.99
Item locally warehoused

Perko Water Deck Fill Cap – BlackA replacement cap for Perko water deck fill fittings, keeping your freshwater fill port sealed and protected when ...

View full details
$44.99 - $44.99
$44.99
$44.99 - $44.99
$44.99

PCM Engine Shim Plate | 98124

$13.78 - $13.78
$13.78
$13.78 - $13.78
$13.78
Only 1 left!

PCM Engine Shim Plate | 98124Precision matters when it comes to engine alignment. This OEM-specification shim plate is used in PCM inboard engine a...

View full details
$13.78 - $13.78
$13.78
$13.78 - $13.78
$13.78

PCM Marine Engine Nut 7/16 -20| RS1028

$0.64 - $0.64
$0.64
$0.64 - $0.64
$0.64
10 in stock

PCM Marine Engine Nut – RS1028A genuine PCM engine nut for inboard marine engine assemblies. Small fasteners like this are the kind of part that st...

View full details
$0.64 - $0.64
$0.64
$0.64 - $0.64
$0.64
Seachoice 01975 Fastener Restock Bundle

Seachoice 01975 Fastener Restock Bundle

$988.53 - $988.53
$988.53
$988.53 - $988.53
$988.53
Item locally warehoused

Seachoice 01975 Fastener Restock Bundle is a ready-to-use mix of common stainless and nylon-insert fasteners and washers—built for quick marine har...

View full details
$988.53 - $988.53
$988.53
$988.53 - $988.53
$988.53
Eye Nut Stainless 1/2"-13

Eye Nut Stainless 1/2"-13

$13.59 - $13.59
$13.59
$13.59 - $13.59
$13.59
Item locally warehoused

Sea-Dog Line stainless eye nut for marine lifting and securement applications—built from investment-cast 316 stainless steel for corrosion resistan...

View full details
$13.59 - $13.59
$13.59
$13.59 - $13.59
$13.59
Eye Nuts Stainless 5/16"-18

Eye Nuts Stainless 5/16"-18

$7.49 - $7.49
$7.49
$7.49 - $7.49
$7.49
Item locally warehoused

Built for securement and lifting use, these Sea-Dog Line eye nuts are made from investment cast 316 stainless steel to resist corrosion in marine e...

View full details
$7.49 - $7.49
$7.49
$7.49 - $7.49
$7.49
Eye Nut Stainless 1/2"-13

Eye Nut Stainless 1/2"-13

$16.09 - $16.09
$16.09
$16.09 - $16.09
$16.09
Item locally warehoused

LNS Sea-Dog Line eye nut for lifting or securement points—made for corrosion resistance with investment cast 316 stainless steel. The 1/2"-13 threa...

View full details
$16.09 - $16.09
$16.09
$16.09 - $16.09
$16.09
Cap Screw - Hex Head, 1/2"-13 x 7"

Cap Screw - Hex Head, 1/2"-13 x 7"

$21.39 - $21.39
$21.39
$21.39 - $21.39
$21.39
Item locally warehoused

Secure components with this 1/2"-13 x 7" hex head cap screw made from 18-8 stainless steel. The hex head design makes it easy to tighten using the ...

View full details
$21.39 - $21.39
$21.39
$21.39 - $21.39
$21.39
Eye Nuts Stainless 1/4"-20

Eye Nuts Stainless 1/4"-20

$6.19 - $6.19
$6.19
$6.19 - $6.19
$6.19
Item locally warehoused

For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion r...

View full details
$6.19 - $6.19
$6.19
$6.19 - $6.19
$6.19
Cap Screw - Hex Head, 1/2"-13 x 10"

Cap Screw - Hex Head, 1/2"-13 x 10"

$29.99 - $29.99
$29.99
$29.99 - $29.99
$29.99
Item locally warehoused

A hex head cap screw in 18-8 stainless steel, sized for 1/2"-13 coarse thread and 10" length—ideal for durable, corrosion-resistant fastening in ma...

View full details
$29.99 - $29.99
$29.99
$29.99 - $29.99
$29.99
Eye Nut Stainless 3/8"-16

Eye Nut Stainless 3/8"-16

$9.79 - $9.79
$9.79
$9.79 - $9.79
$9.79
Item locally warehoused

Sea-Dog Line Eye Nut Stainless 3/8"-16 (SKU 354-0781101) is an investment-cast marine-grade 316 stainless eye nut made for reliable lifting and sec...

View full details
$9.79 - $9.79
$9.79
$9.79 - $9.79
$9.79
Lag Screw, 3/8 x 5"

Lag Screw, 3/8 x 5"

$51.29 - $51.29
$51.29
$51.29 - $51.29
$51.29
Item locally warehoused

Hot Dipped Galvanized.

$51.29 - $51.29
$51.29
$51.29 - $51.29
$51.29
Phillips Machine Screw - Oval Head, 5/16"-18 x 5"

Phillips Machine Screw - Oval Head, 5/16"-18 x 5"

$37.59 - $37.59
$37.59
$37.59 - $37.59
$37.59
Item locally warehoused

A corrosion-resistant Phillips oval head machine screw in 18-8 stainless steel—sized 5/16"-18 x 5" for marine hardware fastening needs. Key Feature...

View full details
$37.59 - $37.59
$37.59
$37.59 - $37.59
$37.59
Eye Nut Stainless 3/8"-16

Eye Nut Stainless 3/8"-16

$7.89 - $7.89
$7.89
$7.89 - $7.89
$7.89
Item locally warehoused

For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion r...

View full details
$7.89 - $7.89
$7.89
$7.89 - $7.89
$7.89
Lag Screw, 3/8 x 4"

Lag Screw, 3/8 x 4"

$40.99 - $40.99
$40.99
$40.99 - $40.99
$40.99
Item locally warehoused

Secure marine and outdoor components with this Seachoice lag screw—3/8" diameter x 4" length, hot dipped galvanized for corrosion resistance. Key F...

View full details
$40.99 - $40.99
$40.99
$40.99 - $40.99
$40.99
Steel Driver Bits #2

Steel Driver Bits #2

$3.69 - $3.69
$3.69
$3.69 - $3.69
$3.69
Item locally warehoused

Keep a reliable Phillips #2 bit on hand for frequent screw-driving jobs. This steel driver bit is 2" long with a 1/4" hex drive for secure fit in c...

View full details
$3.69 - $3.69
$3.69
$3.69 - $3.69
$3.69
Cap Screw - Hex Head, 1/2"-13 x 8"

Cap Screw - Hex Head, 1/2"-13 x 8"

$18.39 - $18.39
$18.39
$18.39 - $18.39
$18.39
Item locally warehoused

A durable hex head cap screw sized for marine and general hardware applications—made from 18-8 stainless steel for corrosion resistance. Key Featur...

View full details
$18.39 - $18.39
$18.39
$18.39 - $18.39
$18.39
Eye Nuts Stainless 1/4"-20

Eye Nuts Stainless 1/4"-20

$3.69 - $3.69
$3.69
$3.69 - $3.69
$3.69
Item locally warehoused

Sea-Dog Line stainless eye nuts are built to create a strong lifting or securement point—made from investment-cast 316 stainless steel for excellen...

View full details
$3.69 - $3.69
$3.69
$3.69 - $3.69
$3.69
Hex Nut M12-1.75

Hex Nut M12-1.75

$146.29 - $146.29
$146.29
$146.29 - $146.29
$146.29
Item locally warehoused

A dependable marine fastener for fastening applications: this hex nut is sized M12-1.75 and made from 18-8 stainless steel for corrosion resistance...

View full details
$146.29 - $146.29
$146.29
$146.29 - $146.29
$146.29
Stainless Fender Washer 1/2", .109" Thick, OD 2

Stainless Fender Washer 1/2", .109" Thick, OD 2

$101.29 - $101.29
$101.29
$101.29 - $101.29
$101.29
Item locally warehoused

Stainless Fender Washer for marine and hardware applications—18-8 stainless steel construction with a 1/2" size, .109" thickness, and 2" OD for bro...

View full details
$101.29 - $101.29
$101.29
$101.29 - $101.29
$101.29
Seachoice 00673 3/8"-16 x 3' Threaded Rod - Stainless

Seachoice 00673 3/8"-16 x 3' Threaded Rod - Stainless

$28.89 - $28.89
$28.89
$28.89 - $28.89
$28.89
Item locally warehoused

A Seachoice 00673 stainless threaded rod sized for 3/8"-16 (right-hand) threads and cut to 3' length—ideal for fabricating and replacing marine har...

View full details
$28.89 - $28.89
$28.89
$28.89 - $28.89
$28.89
Steel Driver Bits #3

Steel Driver Bits #3

$23.29 - $23.29
$23.29
$23.29 - $23.29
$23.29
Item locally warehoused

Finish drive hardware tasks with this Seachoice/ LNS steel driver bit made for precision fastening. Key Features #3 size steel driver bit 2" long ...

View full details
$23.29 - $23.29
$23.29
$23.29 - $23.29
$23.29
Seachoice 00674 1/2"-13 x 3' Threaded Rod - Stainless

Seachoice 00674 1/2"-13 x 3' Threaded Rod - Stainless

$51.29 - $51.29
$51.29
$51.29 - $51.29
$51.29
Item locally warehoused

SeaChoice 00674 threaded rod is made from 18-8 stainless steel for corrosion-resistant marine hardware applications. This 1/2"-13 size is supplied ...

View full details
$51.29 - $51.29
$51.29
$51.29 - $51.29
$51.29
Nylon Flat Washer 5/8", 0.62" Thick, OD 1-1/4"

Nylon Flat Washer 5/8", 0.62" Thick, OD 1-1/4"

$17.89 - $17.89
$17.89
$17.89 - $17.89
$17.89
Item locally warehoused

Use this nylon flat washer to help spread load and protect mating surfaces on marine and other hardware applications. It’s sized for 5/8" hardware ...

View full details
$17.89 - $17.89
$17.89
$17.89 - $17.89
$17.89
Lock Washer, 5/8"

Lock Washer, 5/8"

$63.39 - $63.39
$63.39
$63.39 - $63.39
$63.39
Item locally warehoused

Secure fastening with a corrosion-resistant lock washer designed for 5/8" threaded applications. Made from 18-8 stainless steel for reliable perfor...

View full details
$63.39 - $63.39
$63.39
$63.39 - $63.39
$63.39
Phillips Machine Screw - Pan Head. 3/8"-16 x 2"

Phillips Machine Screw - Pan Head. 3/8"-16 x 2"

$185.79 - $185.79
$185.79
$185.79 - $185.79
$185.79
Item locally warehoused

SeaChoice Phillips pan head machine screw in 18-8 stainless steel (3/8"-16 x 2"). Key Features Phillips drive for straightforward installation wit...

View full details
$185.79 - $185.79
$185.79
$185.79 - $185.79
$185.79
Phillips Machine Screw - Pan Head. 5/16"-18 x 1"

Phillips Machine Screw - Pan Head. 5/16"-18 x 1"

$95.49 - $95.49
$95.49
$95.49 - $95.49
$95.49
Item locally warehoused

Replace or add Phillips pan head machine screws for marine and general fastening jobs using this 5/16"-18 x 1" stainless option. Key Features Phil...

View full details
$95.49 - $95.49
$95.49
$95.49 - $95.49
$95.49
Phillips Machine Screw - Pan Head. 1/4"-20 x 2-1/2"

Phillips Machine Screw - Pan Head. 1/4"-20 x 2-1/2"

$48.49 - $48.49
$48.49
$48.49 - $48.49
$48.49
Item locally warehoused

This Seachoice Phillips machine screw features a pan head profile and measures 1/4"-20 x 2-1/2", made from 18-8 stainless steel for corrosion-resis...

View full details
$48.49 - $48.49
$48.49
$48.49 - $48.49
$48.49
Tee Nut - Stainless 1/4"-20

Tee Nut - Stainless 1/4"-20

$62.19 - $62.19
$62.19
$62.19 - $62.19
$62.19
Item locally warehoused

Use this stainless tee nut to create a durable 1/4"-20 threaded connection in marine-grade installations where you need a secure, corrosion-resista...

View full details
$62.19 - $62.19
$62.19
$62.19 - $62.19
$62.19
Carriage Bolt, 1/2"-13 x 5"

Carriage Bolt, 1/2"-13 x 5"

$49.39 - $49.39
$49.39
$49.39 - $49.39
$49.39
10.0item | $49.39 / 10item
Item locally warehoused

A heavy-duty carriage bolt sized for through-bolting applications—1/2"-13 x 5" with a hot-dipped galvanized finish for corrosion resistance. Key Fe...

View full details
$49.39 - $49.39
$49.39
$49.39 - $49.39
$49.39
10.0item | $49.39 / 10item
Nylon Insert Locknut - Stainless 5/16-24

Nylon Insert Locknut - Stainless 5/16-24

$120.79 - $120.79
$120.79
$120.79 - $120.79
$120.79
Item locally warehoused

Nylon insert locknut in stainless steel for secure, vibration-resistant fastening on 5/16-24 threaded hardware. The nylon insert helps resist loose...

View full details
$120.79 - $120.79
$120.79
$120.79 - $120.79
$120.79
Seachoice 00671 5/16"-18 x 3' Threaded Rod - Stainless

Seachoice 00671 5/16"-18 x 3' Threaded Rod - Stainless

$41.79 - $41.79
$41.79
$41.79 - $41.79
$41.79
Item locally warehoused

Seachoice threaded rod in 18-8 stainless steel for secure, corrosion-resistant marine-style fastening applications. Key Features Seachoice threade...

View full details
$41.79 - $41.79
$41.79
$41.79 - $41.79
$41.79
Seachoice 18-8 Stainless Steel Phillips Barrel Nuts w/ Truss Head, 10-24 X 1/2 In., Pack of 25

Seachoice 18-8 Stainless Steel Phillips Barrel Nuts w/ Truss Head, 10-24 X 1/2 In., Pack of 25

$83.19 - $83.19
$83.19
$83.19 - $83.19
$83.19
Item locally warehoused

Seachoice Phillips barrel nuts with a truss head are an 18-8 stainless steel fastening solution designed to help resist corrosion in marine environ...

View full details
$83.19 - $83.19
$83.19
$83.19 - $83.19
$83.19
Carriage Bolt, 1/2"-13 x 4"

Carriage Bolt, 1/2"-13 x 4"

$85.49 - $85.49
$85.49
$85.49 - $85.49
$85.49
Item locally warehoused

Carriage Bolt, 1/2"-13 x 4" — Hot Dipped Galvanized hardware for secure, long-lasting fastening in marine and general exterior applications. Key Fe...

View full details
$85.49 - $85.49
$85.49
$85.49 - $85.49
$85.49
Carriage Bolt, 1/2"-13 x 3"

Carriage Bolt, 1/2"-13 x 3"

$140.39 - $140.39
$140.39
$140.39 - $140.39
$140.39
Item locally warehoused

A hot-dipped galvanized carriage bolt sized for 1/2"-13 coarse thread and 3" length applications where a square neck helps prevent bolt rotation du...

View full details
$140.39 - $140.39
$140.39
$140.39 - $140.39
$140.39
Flat Washer, 3/8", .062" Thick, OD 1"

Flat Washer, 3/8", .062" Thick, OD 1"

$29.49 - $29.49
$29.49
$29.49 - $29.49
$29.49
Item locally warehoused

A hot-dipped galvanized flat washer for broad fastening and mounting applications where corrosion resistance matters. Size: 3/8" inside diameter wi...

View full details
$29.49 - $29.49
$29.49
$29.49 - $29.49
$29.49
Lag Screw, 3/8 x 3"

Lag Screw, 3/8 x 3"

$34.19 - $34.19
$34.19
$34.19 - $34.19
$34.19
Item locally warehoused

A heavy-duty lag screw for marine and exterior fastening jobs where corrosion-resistant hardware is needed. Key Features Size: 3/8" x 3" Material/...

View full details
$34.19 - $34.19
$34.19
$34.19 - $34.19
$34.19