Volvo Penta Trim Cylinder Hydraulic Tube Clamp 3863060
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Volvo Penta 3863060 – Trim Cylinder Hydraulic Tube Clamp
- Part Number: 3863060
- Brand: Volvo Penta (OEM Genuine)
- Official Product Type: Clamp – Trim Cylinder Hydraulic Tube Assembly
- System: Power Trim / Hydraulic
- Used With: Rear hydraulic tube 3862857, front hydraulic tube 3862858, and O-ring 960214 in the DPH/DPR trim cylinder assembly
- Supersedes: No confirmed OEM supersession – order by active number 3863060
- Weight: Approx. 0.1 lb
- Kit Contents: Clamp only – hydraulic tubes, O-rings, and trim cylinders are serviced separately
The 3863060 is a genuine OEM Volvo Penta clamp used in the trim cylinder hydraulic tube assembly on DPH and DPR sterndrives. It secures the hydraulic tubes (3862857 and 3862858) within the trim cylinder circuit, working alongside O-ring 960214 to maintain secure, leak-free hydraulic connections. Using the correct OEM clamp ensures proper retention force and prevents tube movement under hydraulic pressure during power trim operation.
Compatible Applications
- Volvo Penta DPH-A – trim cylinder hydraulic tube assembly
- Volvo Penta DPH-B – trim cylinder hydraulic tube assembly
- Volvo Penta DPR-A – trim cylinder hydraulic tube assembly
- Volvo Penta DPR-B – trim cylinder hydraulic tube assembly
- Other DPH/DPR variants where 3863060 is specified in the trim cylinder diagram – confirm by drive serial number
Serial Number Notice: Confirm the exact drive model and trim cylinder diagram before ordering. Volvo Penta uses various clamp types across different assemblies — match by part number and diagram position rather than by size alone.
When to Replace
Replace this clamp when it shows corrosion, deformation, cracking, or reduced clamping force, or whenever the trim cylinder hydraulic tubes are replaced. A clamp that has been removed and shows wear should not be reused — proper clamping force is essential to prevent hydraulic tube movement and fluid leaks under trim system pressure.
Service Interval
Inspect trim cylinder clamps during annual sterndrive service or any time the trim cylinder assembly is disassembled. Replace as a matter of course whenever the adjacent hydraulic tubes or O-rings are being serviced — the cost of a new clamp is minimal compared to the risk of a hydraulic leak from a fatigued or reused clamp.
Associated Service Parts
- Volvo Penta Rear Trim Cylinder Hydraulic Tube 3862857 – Rear hydraulic tube secured by this clamp
- Volvo Penta Front Trim Cylinder Hydraulic Tube 3862858 – Front hydraulic tube in the same assembly
- Volvo Penta O-Ring 960214 – Sealing O-ring used with the hydraulic tubes
- Volvo Penta Port Trimming Cylinder 22121309 – DPH/DPR port trim cylinder
- Volvo Penta Starboard Trimming Cylinder 21840806 – DPH/DPR starboard trim cylinder
Installation Notes
Install this clamp as part of the trim cylinder hydraulic tube service. Ensure the hydraulic tubes are fully seated and correctly positioned before tightening the clamp. Inspect the mating O-ring 960214 and replace it at the same time. After reassembly, operate the trim system through its full range and inspect all connections for hydraulic fluid leaks before returning the drive to service.
Technical FAQ
Q: Can I use a generic clamp instead of the OEM part?
A: Not recommended. The 3863060 is sized and rated specifically for the Volvo Penta DPH/DPR hydraulic tube assembly. A generic substitute may not provide the correct retention force or dimensional fit, risking tube movement and hydraulic leaks under trim system pressure.
Q: Do I need to replace the clamp when replacing the hydraulic tubes?
A: Yes. Always replace the clamp when servicing the hydraulic tubes. A clamp that has been torqued and removed may have reduced clamping force and should not be reused.
Q: Which tubes does this clamp secure?
A: This clamp is used in the DPH/DPR trim cylinder assembly with both the rear tube 3862857 and front tube 3862858. Confirm the exact diagram position for your drive model before ordering.
Parts Desk Insights
Best Use Case: Ideal for customers completing a full trim cylinder hydraulic tube service on a DPH or DPR sterndrive. Most often ordered alongside both hydraulic tubes (3862857 and 3862858) and O-ring 960214 as part of a complete trim tube refresh.
Common Issues: This clamp is frequently overlooked when ordering trim tube service parts — customers order the tubes and O-rings but forget the clamp. Reusing an old clamp after tube replacement is a common cause of hydraulic leaks after reassembly. The other common mistake is substituting a generic clamp by size, which can result in poor fit or insufficient retention in the hydraulic circuit.
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 1-3 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.