Hustler 3-Blade Aluminum Propeller – 13.25" x 19" | Right Hand Rotation

Hustler 3-Blade Aluminum Propeller – 13.25" x 19" | Right Hand Rotation

The Hustler 3-blade aluminum propeller is built for boaters who want maximum top-end speed and strong bow lift from an aluminum prop. The 13.25" x 19" is a higher-pitch option in the Hustler lineup, suited to engines that are running below their optimal WOT RPM range with a lower-pitch prop — stepping up in pitch pulls the RPM down and extracts more top-end speed from engines with headroom to spare. Designed for 40–150 hp engines with 4.25" gearcases.

Key Features

• Stainless steel geometry in aluminum — Blade profiles drawn from the same stainless steel designs, giving this prop a performance edge over standard die-cast aluminum propellers.
• Squeeze cast construction — High-density casting produces stiffer blades with less flex, improving propulsive efficiency and fuel economy compared to conventional die-cast aluminum props.
• Tuned exhaust vents — Free-flowing exhaust ports reduce backpressure and water density around the blades at acceleration, improving hole shot and horsepower delivery.
• Ultracoat™ five-step powder coat finish — Superior corrosion and abrasion resistance compared to standard painted finishes. Keeps the prop looking sharp season after season.
• Wide engine compatibility — Fits Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, and Yamaha® outboards and sterndrives.

Specifications

• Diameter x Pitch: 13.25" x 19"
• Blades: 3
• Material: Aluminum
• Rotation: Right Hand (Standard)
• Gearcase Fit: 4.25"
• Engine Range: 40–150 hp
• Hub System: 500 Series hub kit required (sold separately)

Hub Kit Required

A 500 Series MasterGuard installation hub kit is required and sold separately. Browse the lineup to find the right kit for your engine:

• MasterGuard Hub Kit 500
• Hub Kit 501
• Hub Kit 502
• Hub Kit 503
• Hub Kit 504
• Hub Kit 505
• Hub Kit 506
• Hub Kit 507
• Hub Kit 508
• Hub Kit 509
• Hub Kit 510

Refer to the application chart for your engine’s required kit number.

Compare Models

Looking for a different pitch, blade count, or material at this gearcase size?

• Hustler 3-Blade Aluminum – 13.25" x 17" RH — lower pitch, stronger hole shot
• Hustler 4-Blade Aluminum – 13.25" x 17" RH — better load handling and stern lift
• Express Mach3 – 13.25" x 19" Stainless Steel RH — same pitch, stainless upgrade
• Express Mach4 – 13" x 19" 4-Blade Stainless RH — 4-blade stainless at similar pitch

Parts Desk Insights

Best use case: Recommend the 13.25" x 19" when a customer is already running a lower-pitch Hustler or OEM aluminum prop and their engine is hitting the top of its WOT RPM range with room to spare — stepping up to 19" pitch will pull RPM down into the optimal band and deliver more top-end speed. It’s a strong choice for lightly loaded runabouts, bass boats, and pontoons where top speed is the priority. If the customer is regularly running with a full load or doing watersports, the lower-pitch 4-blade at 17" will serve them better. For customers who want the same 19" pitch in stainless, the Express Mach3 13.25" x 19" is the direct upgrade. Always confirm engine make, model, year, gearcase size, and current WOT RPM before recommending a pitch change.