Hustler 4-Blade Aluminum Propeller – 13" x 19" | Right Hand Rotation

Hustler 4-Blade Aluminum Propeller – 13" x 19" | Right Hand Rotation

The Hustler 4-blade aluminum propeller combines the acceleration, stern lift, and rough-water handling of a four-blade design with the top-end speed you’d expect from a three-blade. The 13" x 19" is a higher-pitch option in the Hustler 4-blade lineup, suited to engines running below their optimal WOT RPM range with a lower-pitch prop — stepping up in pitch pulls RPM down and extracts more top-end performance while retaining the load-handling advantages of four blades. Designed for 40–150 hp engines with 4.25" gearcases.

Key Features

• 4-blade performance, 3-blade speed — Swept cleaver geometry delivers fast acceleration and maintains top-end RPM comparable to three-blade props, even under load.
• Lifts the hull higher — Increased stern lift reduces wetted surface area, minimizing speed loss when the boat is fully loaded with passengers and gear — where a three-blade can lose up to 3 mph.
• Squeeze cast aluminum construction — High-density casting produces stiffer blades with less flex, improving propulsive efficiency over standard die-cast aluminum props.
• Tuned exhaust vents — Large free-flowing exhaust ports reduce backpressure, improving hole shot and best-in-class reversibility.
• Ultracoat™ five-step powder coat finish — Superior corrosion and abrasion resistance. Keeps the prop looking sharp season after season.
• Wide engine compatibility — Fits Evinrude®, Honda®, Johnson®, Mariner®, Mercury®, MerCruiser®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, and Yamaha® outboards and sterndrives.

Specifications

• Diameter x Pitch: 13" x 19"
• Blades: 4
• Material: Aluminum
• Rotation: Right Hand (Standard)
• Gearcase Fit: 4.25"
• Engine Range: 40–150 hp
• Hub System: 500 Series hub kit required (sold separately)

Hub Kit Required

A 500 Series MasterGuard installation hub kit is required and sold separately. Browse the lineup to find the right kit for your engine:

• MasterGuard Hub Kit 500
• Hub Kit 501
• Hub Kit 502
• Hub Kit 503
• Hub Kit 504
• Hub Kit 505
• Hub Kit 506
• Hub Kit 507
• Hub Kit 508
• Hub Kit 509
• Hub Kit 510

Refer to the application chart for your engine’s required kit number.

Compare Models

Looking for a different pitch, blade count, or material at this gearcase size?

• Hustler 3-Blade Aluminum – 13.25" x 19" RH — 3-blade at similar pitch, maximum top-end speed
• Hustler 4-Blade Aluminum – 13.25" x 17" RH — lower pitch, stronger hole shot
• Hustler 4-Blade Aluminum – 13.5" x 15" RH — lower pitch, maximum acceleration
• Express Mach4 – 13" x 19" 4-Blade Stainless RH — same pitch and blade count, stainless upgrade

Parts Desk Insights

Best use case: Recommend the 13" x 19" 4-blade when a customer wants the load-handling and stern lift advantages of a four-blade design at a higher pitch — ideal for boats that are regularly loaded with passengers and gear but whose engine still has WOT RPM headroom on a lower-pitch prop. The combination of 19" pitch and four blades is particularly effective on watersports boats, tri-toons, and bay boats that carry variable loads and need both acceleration and top-end performance. If the customer runs a consistently light load and wants pure top speed, the 3-blade at 19" pitch may have a slight top-end edge. For customers wanting the same pitch and blade count in stainless, the Express Mach4 13" x 19" is the direct upgrade. Always confirm engine make, model, year, gearcase size, and current WOT RPM before recommending a pitch change.