Mercury MerCruiser Alpha Upper Gear Set 22/20T 1.50 Ratio 18411A2
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Mercury MerCruiser 18411A2 is a genuine OEM upper gear set for Alpha-family sterndrives. Current Mercury dealer references identify it as an upper gear kit with 22/20 teeth and a 1.50/1.47 ratio, used in the upper drive gear section rather than as a general lower-unit gear set.
Key Features
- Genuine Mercury MerCruiser OEM part number 18411A2.
- 22/20 tooth upper gear set.
- 1.50/1.47 gear ratio.
- Current dealer listing shows GTIN 745061123625.
- Current dealer shipping specs are approximately 4.90 lb, 7.30 in. x 4.80 in. x 4.60 in.
Engine Compatibility
The strongest supportable fitment for 18411A2 is MerCruiser MC-I, R, MR, Alpha One, and Alpha One Gen II sterndrives with serial coverage shown as 0K999999 and below, across model years commonly listed from 1971-1997. This is a drive application part, so the sterndrive family matters more than the engine model alone.
Serial Number Fitment Notice
Verify fitment by exact drive model, serial number, and the correct driveshaft housing / drive gears parts diagram before ordering. This gear set spans several older MerCruiser Alpha-family drive applications, so serial-based confirmation is the safest way to match the correct ratio and tooth count.
When This Part Needs Replacement
This gear set is typically replaced during upper-drive rebuilds when the original gears are worn, chipped, pitted, noisy, or damaged from gearcase failure. Because 18411A2 is the matched upper gear set, it should be selected by the correct ratio and drive family rather than by appearance alone. This is a practical service inference supported by its documented upper-gear-kit application.
Installation Notes
Install 18411A2 only after confirming the correct Alpha-family drive application and ratio requirement. Current parts references place it in the driveshaft housing and drive gears section, so it should be matched to the exact upper-drive gear layout during rebuild or reseal work.
Alternate/Superseded Part Numbers
Current cross-reference sources connect 59832A2, 18410A2, and 59832A4 as earlier superseded OEM numbers associated with 18411A2.
Parts Desk Insight
With Alpha gear sets, the important match is the exact ratio, tooth count, and drive family. A quick serial-number and ratio check usually saves a lot of trouble, especially on older MC-I, MR, Alpha One, and Gen II drives where several gear sets can seem close on paper.
Shipping: Ships same or next day for fast Canada wide shipping. ⚓
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 3–4 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.