Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Rub Rails

Rub Rails

Rub Rail Kits, Inserts, Stainless Rail, Flex Trim & Hull-Side Protection

Shop rub rail kits, flexible vinyl inserts, Suproflex rub rail, stainless hollow-back rail, rigid and semi-rigid rub rail, flex trim, black and white rail, chrome insert styles, end trim searches, and replacement rub rail parts for refits and repairs.

Shop Rub Rails Browse Types Ask Parts Desk
Measure First

Match profile shape, width, height, color, insert style, length, bend radius, fastener layout, and hull-to-deck joint before ordering replacement rub rail.

Search TACO Rub Rail
Rub rails and rub rail trim

Find Rub Rails Faster

Search by Profile, Color, Insert, Length, Brand, or Kit Style

Use focused terms like TACO rub rail, Suproflex, vinyl insert, stainless rub rail, black rub rail, white rub rail, chrome insert, flex trim, or rub rail kit. If replacing an old rail, photos and measurements help a lot.

Fitment

Profile Shape Matters More Than the Name

Rub rail replacement starts with the existing profile. Measure height, width, insert channel, screw spacing, corner radius, length needed, and whether the rail needs to bend around tight curves.

Profile Search Insert Search 60 ft Kits 80 ft Kits

Refit Planning

Plan Length, Corners, Fasteners, and Finish Pieces

Order enough length for the full run, corners, overlap, and mistakes. Check whether the project needs insert, end caps, fasteners, sealant, trim pieces, heat for bending, and a helper for long rail sections.

End Caps Rub Rail Screws Fasteners
01

Measure the Old Rail

Photos, profile dimensions, insert width, and existing part numbers are the best starting point for replacement.

02

Match Color and Insert

Black, white, chrome insert, and solid profiles should match the boat and the existing hull-side layout.

03

Check Bends and Corners

Flexible rail can handle more curve than rigid sections, but tight corners still need planning and careful installation.

Installation Support

Prepare the Hull Joint Before the New Rail Goes On

Remove old fasteners carefully, clean the joint, inspect for cracks or soft spots, mark the run, dry fit the rail, pre-plan corners, and confirm all fasteners and finishing parts before starting.

Rub Rail Fasteners Bedding Compound Masking Supplies
Before orderingMeasure the rail profile, insert channel, color, length, and bend requirements.
Before installInspect the hull-to-deck joint, old fastener holes, core condition, and corner layout.
During installWork evenly along the run, avoid over-tightening fasteners, and keep the insert seated cleanly.

Rub Rails FAQ

Choosing Rub Rail and Replacement Inserts

How do I identify my rub rail?

Measure the height, width, insert channel, and profile shape. Photos of the end profile and the existing insert are very helpful when matching a replacement.

Can I replace only the insert?

Often yes, if the main rail is still secure and the replacement insert matches the channel. Confirm width, shape, material, and color before ordering.

What is the difference between rigid and flexible rub rail?

Rigid rail works well on straighter runs and specific profiles. Flexible rail and inserts are easier to work around curves, but still need careful fitting and fastening.

What should I inspect when the old rub rail is removed?

Check the hull-to-deck joint, fastener holes, cracks, corrosion, soft spots, old sealant, and any damage that should be repaired before the new rail is installed.

Shop Rub Rails, Inserts, Kits, Flex Trim & Hull-Side Protection

Start by measuring the existing rail profile, then choose the kit, insert, rail section, color, length, and installation hardware that matches the project.

Shop Rub Rails Confirm Fitment

Filters

Taco V120303WHC501 Flexible Vinyl Insert, 50' White

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., White (V120303WHC501)

$368.33 - $368.33
$368.33
$368.33 - $368.33
$368.33
Item locally warehoused

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., WhiteA clean, flexible vinyl insert designed to snap into TACO Marine V120303-series rub rail ...

View full details
$368.33 - $368.33
$368.33
$368.33 - $368.33
$368.33
Taco S114650P12 1 X 12' SS Hollow Back Rub Rail

TACO Marine 316L Stainless Steel Hollow-Back Rub Rail – 1" x 12 ft. (S114650P12)

$296.09 - $296.09
$296.09
$296.09 - $296.09
$296.09
Item locally warehoused

TACO Marine 316L Stainless Steel Hollow-Back Rub Rail – 1" x 12 ft.A premium stainless steel rub rail section for boats where appearance and corros...

View full details
$296.09 - $296.09
$296.09
$296.09 - $296.09
$296.09
Taco V120303BKA501 Flexible Vinyl Insert, 50' Black

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., Black (V120303BKA501)

$317.11 - $317.11
$317.11
$317.11 - $317.11
$317.11
Item locally warehoused

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., BlackA flexible black vinyl insert designed to snap into TACO Marine V120303-series rub rail m...

View full details
$317.11 - $317.11
$317.11
$317.11 - $317.11
$317.11
Taco V120003BKA501 Flexible Vinyl Insert, 50' Black

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., Black (V120003BKA501)

$170.49 - $170.49
$170.49
$170.49 - $170.49
$170.49
Item locally warehoused

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., Black (V120003 Series)A flexible black vinyl insert designed to snap into TACO Marine V120003-...

View full details
$170.49 - $170.49
$170.49
$170.49 - $170.49
$170.49
1/4 X 25' Flex Trim White

TACO Marine Flexible Edge Trim – 1/4" x 25 ft., White (V301008W251)

$212.09 - $212.09
$212.09
$212.09 - $212.09
$212.09
Item locally warehoused

TACO Marine Flexible Edge Trim – 1/4" x 25 ft., WhiteA flexible U-channel trim designed to cap and protect raw edges on fibreglass, metal, glass, a...

View full details
$212.09 - $212.09
$212.09
$212.09 - $212.09
$212.09
Taco V119990WCM802 Suproflex Rub Rail Kit, Medium, 80', White/Chrome

TACO Marine Suproflex Rub Rail Kit – Medium, 80 ft., White/Chrome (V119990WCM802)

$1,648.82 - $1,648.82
$1,648.82
$1,648.82 - $1,648.82
$1,648.82
Item locally warehoused

TACO Marine Suproflex Rub Rail Kit – Medium, 80 ft., White/ChromeThe Suproflex is TACO Marine's premium co-extruded rub rail system — engineered to...

View full details
$1,648.82 - $1,648.82
$1,648.82
$1,648.82 - $1,648.82
$1,648.82
1/4 X 25' Flex Trim Black

TACO Metals 1/4" x 25 ft. Flexible Edge Trim – Black (V301008B251)

$192.29 - $192.29
$192.29
$192.29 - $192.29
$192.29
Item locally warehoused

Clean, Professional Edge Finishing for Marine SurfacesThis flexible vinyl edge trim is designed to cap and protect raw edges on fiberglass, metal, ...

View full details
$192.29 - $192.29
$192.29
$192.29 - $192.29
$192.29
Taco V119990WCM602 Suproflex Rub Rail Kit, Medium, 60', White/Chrome

TACO Metals Suproflex Rub Rail Kit – Medium, 60 ft., White/Chrome (V119990WCM602)

$1,307.08 - $1,307.08
$1,307.08
$1,307.08 - $1,307.08
$1,307.08
Item locally warehoused

Premium Co-Extruded Rub Rail for Boats Up to 65 ft.The Suproflex Medium Rub Rail Kit delivers a clean, factory-finished look with serious impact pr...

View full details
$1,307.08 - $1,307.08
$1,307.08
$1,307.08 - $1,307.08
$1,307.08

TACO Metals 5/32" x 25 ft. Flexible Edge Trim – White (V301005W251)

$212.09 - $212.09
$212.09
$212.09 - $212.09
$212.09
Item locally warehoused

Clean, Finished Edges on Any Marine SurfaceThis flexible vinyl edge trim is built to cap and protect raw edges on fiberglass, metal, glass, and ple...

View full details
$212.09 - $212.09
$212.09
$212.09 - $212.09
$212.09
Taco V119990BBK802 Suproflex Rub Rail Kit, Medium, 80', Black/Chrome

TACO Metals Suproflex Rub Rail Kit – Medium, 80 ft., Black/Chrome (V119990BBK802)

$1,484.41 - $1,484.41
$1,484.41
$1,484.41 - $1,484.41
$1,484.41
Item locally warehoused

Full-Length Rub Rail Coverage for Larger Hulls — Up to 65 ft.The Suproflex Medium 80 ft. Rub Rail Kit is built for larger center consoles, walkarou...

View full details
$1,484.41 - $1,484.41
$1,484.41
$1,484.41 - $1,484.41
$1,484.41
5/32 X 25' Flex Trim-Black

TACO Metals 5/32" x 25 ft. Flexible Edge Trim – Black (V301005B251)

$212.09 - $212.09
$212.09
$212.09 - $212.09
$212.09
Item locally warehoused

Precise Edge Protection for Thin Panels — in a Clean Black FinishThis flexible vinyl edge trim is designed to cap and protect raw edges on fibergla...

View full details
$212.09 - $212.09
$212.09
$212.09 - $212.09
$212.09
Taco V119990BBK602 Suproflex Rub Rail Kit, Medium, 60', Black/Chrome

TACO Metals Suproflex Rub Rail Kit – Medium, 60 ft., Black/Chrome (V119990BBK602)

$1,188.26 - $1,188.26
$1,188.26
$1,188.26 - $1,188.26
$1,188.26
Item locally warehoused

Bold Protection for Mid-Size to Large Hulls — Up to 65 ft.The Suproflex Medium 60 ft. Rub Rail Kit in Black/Chrome delivers serious impact protecti...

View full details
$1,188.26 - $1,188.26
$1,188.26
$1,188.26 - $1,188.26
$1,188.26
Taco V119970BKA1001 Suproflex Rub Rail Moulding Only, Large, 100', Black

TACO Metals Suproflex Rub Rail Moulding Only – Large, 100 ft., Black (V119970BKA1001)

$1,327.63 - $1,327.63
$1,327.63
$1,327.63 - $1,327.63
$1,327.63
Item locally warehoused

Large-Profile Suproflex Moulding for Full-Length Hull Runs — Insert Sold SeparatelyThis is the moulding extrusion only — the structural backbone of...

View full details
$1,327.63 - $1,327.63
$1,327.63
$1,327.63 - $1,327.63
$1,327.63
Taco V119960WCM602 Suproflex Rub Rail Kit, Small, 60', White/Chrome

Taco V119960WCM602 Suproflex Rub Rail Kit, Small, 60', White/Chrome

$1,032.72 - $1,032.72
$1,032.72
$1,032.72 - $1,032.72
$1,032.72
Item locally warehoused

Lightweight, ultra-flexible profiles provide a seamless precision fit. Co-extruded vinyl provides two levels of hardness, ensuring enhanced protect...

View full details
$1,032.72 - $1,032.72
$1,032.72
$1,032.72 - $1,032.72
$1,032.72
Taco V119960BBK602 Suproflex Rub Rail Kit, Small, 60', Black/Chrome

TACO Metals Suproflex Rub Rail Kit – Small, 60 ft., Black/Chrome (V119960BBK602)

$981.30 - $981.30
$981.30
$981.30 - $981.30
$981.30
Item locally warehoused

Suproflex Rub Rail Protection for Smaller Boats — Up to 65 ft.The Suproflex Small 60 ft. Rub Rail Kit in Black/Chrome is the right-sized solution f...

View full details
$981.30 - $981.30
$981.30
$981.30 - $981.30
$981.30
Rub Rail Kit w/Chr Insert 70'

TACO Metals Flex Vinyl Rub Rail Kit – 70 ft., White/Chrome (V119811WCM702)

$1,261.59 - $1,261.59
$1,261.59
$1,261.59 - $1,261.59
$1,261.59
Item locally warehoused

Complete Flex Vinyl Rub Rail Kit — 70 ft., White with Chrome InsertThis flexible vinyl rub rail kit gives you everything needed for a clean, seam-f...

View full details
$1,261.59 - $1,261.59
$1,261.59
$1,261.59 - $1,261.59
$1,261.59
Black Semi-Rigid Rubrail w/Inser

TACO Semi-Rigid Vinyl Rub Rail with Insert – 50 ft., Black (V119795BBK50D2)

$902.33 - $902.33
$902.33
$902.33 - $902.33
$902.33
Item locally warehoused

The Middle Ground. Semi-Rigid for Easier Bending, Firmer Protection.Not all hulls are a good fit for fully rigid or fully flexible rub rail — and t...

View full details
$902.33 - $902.33
$902.33
$902.33 - $902.33
$902.33
Rigid Rubrail 20' White

TACO Rigid Vinyl Rub Rail – White, 20 ft., Mid-Size Profile (V219866WHC20D)

$183.07 - $183.07
$183.07
$183.07 - $183.07
$183.07
Item locally warehoused

The Builder’s Choice. Sized for Mid-Range Boats.This TACO rigid vinyl rub rail is one of the most widely used profiles among production boat builde...

View full details
$183.07 - $183.07
$183.07
$183.07 - $183.07
$183.07
Flex Vinyl Rub Rail Kit 50' Black & White

TACO Flex Vinyl Rub Rail Kit – 50 ft., Black & White (V113447BWK502)

$756.08 - $756.08
$756.08
$756.08 - $756.08
$756.08
Item locally warehoused

Two-Tone Style. One Complete Kit.The black and white two-tone combination is one of the most popular rub rail finishes on the water — it adds a sha...

View full details
$756.08 - $756.08
$756.08
$756.08 - $756.08
$756.08
Taco V219647WHA20D Rigid Rub Rail

TACO Rigid Vinyl Rub Rail – White, 20 ft., Large Profile (V219647WHA20D)

$500.81 - $500.81
$500.81
$500.81 - $500.81
$500.81
Item locally warehoused

Built for Bigger Boats. Matched to Your Gelcoat.Larger boats demand a rub rail that can keep up — in scale, in durability, and in appearance. This ...

View full details
$500.81 - $500.81
$500.81
$500.81 - $500.81
$500.81
Rigid Vinyl Rub Rail, White, 1-7/8" H x 3/4" W x 20' L

Rigid Vinyl Rub Rail, White, 1-7/8" H x 3/4" W x 20' L

$324.83 - $324.83
$324.83
$324.83 - $324.83
$324.83
Item locally warehoused

Designed for use without an insert, these excellent general purpose rub rails are made from rigid PVC and will withstand the harsh marine environme...

View full details
$324.83 - $324.83
$324.83
$324.83 - $324.83
$324.83
Flex Vinyl Rubrail Kit 50' Black

TACO Flex Vinyl Rub Rail Kit – 50 ft., Black (V113426BBK502)

$1,121.39 - $1,121.39
$1,121.39
$1,121.39 - $1,121.39
$1,121.39
Item locally warehoused

Everything You Need. One Box. One Run.Replacing or installing rub rail shouldn't require sourcing parts from three different listings. This TACO fl...

View full details
$1,121.39 - $1,121.39
$1,121.39
$1,121.39 - $1,121.39
$1,121.39
Rigid Vinyl Rub Rail, Black, 1-7/8" H x 3/4" W x 20' L

TACO Rigid Vinyl Rub Rail – Black, 1-7/8" H x 3/4" W x 20 ft.

$315.29 - $315.29
$315.29
$315.29 - $315.29
$315.29
Item locally warehoused

Clean Lines. Solid Protection. No Insert Required.This TACO rigid vinyl rub rail is a straightforward, no-fuss hull protection solution for boaters...

View full details
$315.29 - $315.29
$315.29
$315.29 - $315.29
$315.29
Flex Vinyl Rub Rail Kit 50' Black

TACO Flex Vinyl Rub Rail Kit – 50 ft., Black (V112423BBK502)

$1,144.24 - $1,144.24
$1,144.24
$1,144.24 - $1,144.24
$1,144.24
Item locally warehoused

TACO Flex Vinyl Rub Rail Kit – 50 ft., BlackA complete, ready-to-install rub rail system in a single box. This all-in-one kit from TACO Marine incl...

View full details
$1,144.24 - $1,144.24
$1,144.24
$1,144.24 - $1,144.24
$1,144.24

TACO Flexible Vinyl Rub Rail Kit – 50 ft., Black (V110809BBK502)

$621.19 - $621.19
$621.19
$621.19 - $621.19
$621.19
Item locally warehoused

TACO Flexible Vinyl Rub Rail Kit – 50 ft., BlackEverything you need to install a complete rub rail system in one box. This all-in-one kit from TACO...

View full details
$621.19 - $621.19
$621.19
$621.19 - $621.19
$621.19

TACO Suproflex Rub Rail Insert Only – Large, 100 ft., Chrome (V129980CP1001)

$664.59 - $664.59
$664.59
$664.59 - $664.59
$664.59
Item locally warehoused

TACO Suproflex Rub Rail Insert Only – Large, 100 ft., ChromeThis is the replacement chrome insert for TACO's Suproflex Large rub rail system — sold...

View full details
$664.59 - $664.59
$664.59
$664.59 - $664.59
$664.59
Taco V124155BKA501 Flexible Vinyl Insert, 50' Black

TACO Flexible Vinyl Rub Rail Insert – 50 ft., Black (V124155BKA501)

$169.49 - $169.49
$169.49
$169.49 - $169.49
$169.49
Item locally warehoused

TACO Flexible Vinyl Rub Rail Insert – 50 ft., BlackKeep your hull looking sharp and protected with this 50-foot black flexible vinyl rub rail inser...

View full details
$169.49 - $169.49
$169.49
$169.49 - $169.49
$169.49
Taco V124144BKA501 Flexible Vinyl Insert, 50' Black

TACO Flexible Vinyl Rub Rail Insert – 50 ft., Black (V124144BKA501)

$318.59 - $318.59
$318.59
$318.59 - $318.59
$318.59
Item locally warehoused

TACO Flexible Vinyl Rub Rail Insert – 50 ft., BlackGive your boat's rub rail a clean, finished look while protecting the hull from everyday contact...

View full details
$318.59 - $318.59
$318.59
$318.59 - $318.59
$318.59
Taco V120342BKA501 Flexible Vinyl Insert, 50' Black

TACO Marine Flexible Vinyl Rub Rail Insert – 50 ft., Black (V120342BKA501)

$187.86 - $187.86
$187.86
$187.86 - $187.86
$187.86
Item locally warehoused

The Finishing Touch That Protects and Polishes Your Rub Rail.A rub rail without an insert leaves fastener heads exposed and misses the cushioning l...

View full details
$187.86 - $187.86
$187.86
$187.86 - $187.86
$187.86
Taco V120338BKA501 Flexible Vinyl Insert, 50' Black

TACO Flexible Vinyl Rub Rail Insert – 50 ft., Black (V120338BKA501)

$278.83 - $278.83
$278.83
$278.83 - $278.83
$278.83
Item locally warehoused

TACO Flexible Vinyl Rub Rail Insert – 50 ft. | Black Complete your rub rail installation with this flexible black vinyl insert from TACO Marine. De...

View full details
$278.83 - $278.83
$278.83
$278.83 - $278.83
$278.83
Alum Rub Rail 1-1/2" X 12'

TACO Aluminum Rub Rail 1-1/2" x 12 ft. – Drilled & Countersunk (A110638TAL12D)

$356.89 - $356.89
$356.89
$356.89 - $356.89
$356.89
Item locally warehoused

TACO Aluminum Rub Rail – 1-1/2" x 12 ft. | Drilled & Countersunk Give your hull a clean, finished edge with this heavy-duty anodized aluminum r...

View full details
$356.89 - $356.89
$356.89
$356.89 - $356.89
$356.89
Rub Rail Alum. 1-1/8" x12' L

TACO Aluminum Rub Rail 1-1/8" x 12 ft. – Drilled & Countersunk (A110347BLY12D)

$313.49 - $313.49
$313.49
$313.49 - $313.49
$313.49
Item locally warehoused

TACO Aluminum Rub Rail – 1-1/8" x 12 ft. | Drilled & Countersunk Protect your hull in style with this anodized aluminum rub rail from TACO Mari...

View full details
$313.49 - $313.49
$313.49
$313.49 - $313.49
$313.49

Taco F160276 Suproflex Rub Rail End Caps, Large, Stainless

$90.79 - $90.79
$90.79
$90.79 - $90.79
$90.79
Item locally warehoused

Large end caps for Suproflex Rub Rail.

$90.79 - $90.79
$90.79
$90.79 - $90.79
$90.79
Taco Aluminum Rub Rail Overlap 1" x12'

Taco Aluminum Rub Rail Overlap 1" x12'

$335.79 - $335.79
$335.79
$335.79 - $335.79
$335.79
Item locally warehoused

Designed for use without an insert. Easy tight radius bending as well as providing strength and protection. Polished, clear anodized finish to prot...

View full details
$335.79 - $335.79
$335.79
$335.79 - $335.79
$335.79
Taco A510106TAL12D Alum Rub Rail 1" x12' Cb

Taco A510106TAL12D Alum Rub Rail 1" x12' Cb

$187.49 - $187.49
$187.49
$187.49 - $187.49
$187.49
Item locally warehoused

For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish.

$187.49 - $187.49
$187.49
$187.49 - $187.49
$187.49
Taco A510104TAL12DA Alum Edge Trim 3/16 X 3/4

Taco A510104TAL12DA Alum Edge Trim 3/16 X 3/4

$201.89 - $201.89
$201.89
$201.89 - $201.89
$201.89
Item locally warehoused

For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish.

$201.89 - $201.89
$201.89
$201.89 - $201.89
$201.89
Seachoice 29404 Stainless Steel Hollow Back Rub Rail, 1-1/4"W x 12' L, .077 Ga.

Seachoice 29404 Stainless Steel Hollow Back Rub Rail, 1-1/4"W x 12' L, .077 Ga.

$288.09 - $288.09
$288.09
$288.09 - $288.09
$288.09
Item locally warehoused

316 Stainless steel offers excellent corrosion resistance Polished finish Drilled and countersunk on 6" centers

$288.09 - $288.09
$288.09
$288.09 - $288.09
$288.09
Seachoice 29403 Stainless Steel Hollow Back Rub Rail, 1"W x 12' L, .077 Ga.

Seachoice 29403 Stainless Steel Hollow Back Rub Rail, 1"W x 12' L, .077 Ga.

$220.19 - $220.19
$220.19
$220.19 - $220.19
$220.19
Item locally warehoused

316 Stainless steel offers excellent corrosion resistance Polished finish Drilled and countersunk on 6" centers

$220.19 - $220.19
$220.19
$220.19 - $220.19
$220.19
Seachoice 29401 Stainless Steel Hollow Back Rub Rail, 3/4"W x 12' L, .062 Ga.

Seachoice 29401 Stainless Steel Hollow Back Rub Rail, 3/4"W x 12' L, .062 Ga.

$226.29 - $226.29
$226.29
$226.29 - $226.29
$226.29
Item locally warehoused

316 Stainless steel offers excellent corrosion resistance Polished finish Drilled and countersunk on 6" centers

$226.29 - $226.29
$226.29
$226.29 - $226.29
$226.29