Sacrificial Anodes
Marine Sacrificial Anodes & Corrosion Protection
Shop Marine Sacrificial Anodes
Find zinc anodes, aluminum anodes, magnesium anodes, anode kits, shaft anodes, trim tab anodes, engine anodes, outdrive anodes, propeller anodes, and installation hardware for corrosion protection in saltwater, brackish water, and freshwater applications.
Match anode material to your water type, then confirm dimensions, mounting style, and exact application.
Always confirm anode material, dimensions, fastener style, and application for your vessel, drive, engine, shaft, or underwater hardware.
Top OEM Anode Searches
Highlighted Anode Categories
Browse Fast
Shop by Anode Category
Choose the anode material, kit, or application that matches your water type and the metal component you need to protect.
Why It Matters
Anodes Help Protect Underwater Metals from Corrosion
Sacrificial anodes are designed to corrode before more valuable underwater metals such as shafts, propellers, trim tabs, outdrives, thru-hulls, and engine cooling components.
Using the correct anode material and replacing anodes before they are fully consumed helps reduce galvanic corrosion and supports longer component life.
Match Water Type
Zinc is commonly used for saltwater, aluminum can work in saltwater and brackish water, and magnesium is typically used for freshwater applications.
Confirm Shape and Size
Check diameter, length, hole spacing, thread, mounting hardware, contact surface, and whether the anode fits a shaft, tab, drive, engine, or propeller.
Use Kits When Possible
Anode kits help replace multiple matched pieces on a drive or engine at the same time, reducing missed parts during seasonal service.
Parts Desk Guidance
Single Anode or Complete Kit?
If one anode is damaged, missing, or consumed faster than the rest, a single replacement may be enough. For seasonal service or unknown history, a complete anode kit can be the better choice because it refreshes all key protection points together.
Common Questions
Sacrificial Anode Buying Help
How do I choose the correct anode material?
Start with the water type and manufacturer recommendation. Zinc is often used in saltwater, aluminum is common for saltwater or brackish use, and magnesium is typically for freshwater.
When should sacrificial anodes be replaced?
Replace anodes when they are heavily wasted, loose, damaged, missing, or near half consumed. Inspect them regularly and during seasonal service.
Can I mix zinc, aluminum, and magnesium anodes?
Avoid mixing anode materials on the same bonded system unless the manufacturer specifically allows it. Mixed materials can reduce protection or cause uneven performance.
Why do anode dimensions matter?
Anodes need solid metal-to-metal contact and the correct mounting shape. Wrong dimensions, paint, loose fasteners, or poor contact can prevent proper protection.
Ready to Find Your Part?
Search Zinc, Aluminum, Magnesium Anodes & Kits
Use the collection page or search by water type, brand, application, kit, drive model, shaft size, or existing part number.
Filters
Zinc Hull Plate Anode 4-5/8" x 2-1/2" CMT-ZHC2AZ
The CMT-ZHC2AZ (Martyr CMZHC2AZ) is a compact bolt-on zinc hull plate anode designed to protect underwater hull surfaces and bonded metal component...
View full detailsZinc Hull Plate Anode 6-1/4" x 2-3/4" CMT-ZHC3AZ
The CMT-ZHC3AZ (Martyr CMZHC3AZ) is a bolt-on zinc hull plate anode designed to protect underwater hull surfaces from galvanic corrosion. Installed...
View full detailsYamaha Zinc Crankcase Anode 68V-11325-02-00
The Yamaha 68V-11325-02-00 is a genuine OEM zinc crankcase anode designed to protect internal engine components from galvanic corrosion. Installed ...
View full detailsYamaha Magnesium Anode 6AW-1132P-00-00
The Yamaha 6AW-1132P-00-00 is a genuine OEM internal engine anode (often referred to as “Anode 5”) designed to protect cylinder head and crankcase ...
View full detailsYamaha Zinc Crankcase Anode 6G8-11325-00-00
The Yamaha 6G8-11325-00-00 is a genuine OEM zinc crankcase anode designed to protect internal engine components from galvanic corrosion. Instal...
View full detailsBennett Trim Tab Aluminum Anode Kit A 194-CMBNT1AA
The 194-CMBNT1AA (commonly referenced as CMBNT1AKITA kit A) is an aluminum trim tab anode kit designed specifically for Bennett trim tab systems. T...
View full detailsYamaha Zinc Crankcase Anode 63P-11325-01-00
The Yamaha 63P-11325-01-00 is a genuine OEM zinc anode designed to protect Yamaha outboard engines from galvanic corrosion. Commonly used as a cran...
View full detailsVolvo Penta Aluminum Anode Kit 23164609
The Volvo Penta 23164609 is a genuine OEM aluminum anode kit engineered to protect Volvo Penta drive systems and underwater components from galvani...
View full detailsVolvo Penta Aluminum Anode Kit 23615636
The Volvo Penta 23615636 is a genuine OEM aluminum anode kit designed for 130 and 150 series saildrives, providing corrosion protection for the low...
View full detailsVolvo Penta Zinc Anode Kit 3588748
The Volvo Penta 3588748 is a zinc anode kit designed for DPH and DPR duo-prop sterndrives, providing essential corrosion protection for the drive u...
View full detailsVolvo Penta Zinc Anode Kit 3593981
The Volvo Penta 3593981 is a genuine OEM zinc anode kit designed for IPS (Inboard Performance System) drives, providing critical corrosion protecti...
View full detailsVolvo Penta Zinc Anode 838929
The Volvo Penta 838929 is a zinc pencil anode designed to protect internal engine cooling system components from galvanic corrosion. Installed insi...
View full detailsZN Hanging Anode 11' Cable
This fish-shaped zinc anode is a portable overboard sacrificial anode designed to provide temporary corrosion protection for boats at dock or ancho...
View full detailsMerCruiser Bravo 3 Zinc Prop Nut Anode CMT-865182CZ
The CMT-865182CZ is a zinc prop nut anode designed specifically for MerCruiser Bravo 3 sterndrives (2004 and newer), providing dual-function propel...
View full detailsZinc Engine Anode E0 5/16" UNC CMT-EZ0
The CMT-EZ0 is a marine-grade zinc pencil engine anode, E0 style with 5/16" UNC thread, providing sacrificial cathodic protection for internal engi...
View full detailsZinc Shaft Anode 4" CMT-X17
The CMT-X17 is a marine-grade zinc clamp-on shaft anode sized for 4" diameter propeller shafts, providing heavy-duty sacrificial cathodic protectio...
View full detailsSierra Zinc Trim Tab Anode SIE-23-6401 Mercury Mariner
The Sierra 23-6401 (SIE-23-6401) is a marine-grade zinc trim tab anode designed as a direct aftermarket replacement for Mercury and Mariner outboar...
View full detailsYanmar OEM Internal Engine Anode 120650-13420
The Yanmar 120650-13420 is a genuine OEM sacrificial anode designed for Yanmar marine diesel engines, providing cathodic protection for internal co...
View full detailsVolvo Penta Aluminum Pencil Engine Anode – CM838929A (Replaces 838929 / 194)
The CM838929A is a marine-grade aluminum pencil anode designed to protect internal engine cooling passages from galvanic corrosion. Installed insid...
View full detailsAluminum Rudder Anode 3-3/4" CMR03AL 194-CMR03AL
The CMR03AL (194-CMR03AL) is a marine-grade aluminum rudder anode sized at 3-3/4", providing sacrificial cathodic protection for rudder assemblies,...
View full detailsAluminum Rudder Anode 4-1/2" CMR04AL 194-CMR04AL
The CMR04AL (194-CMR04AL) is a marine-grade aluminum rudder anode sized at 4-1/2", providing sacrificial cathodic protection for rudder assemblies,...
View full detailsMercury OEM Aluminum Anode Kit 818298Q1 MerCruiser Alpha One
The Mercury / Quicksilver 818298Q1 is a genuine OEM complete aluminum anode kit designed for MerCruiser Alpha One sterndrives, replacing all factor...
View full detailsMercury OEM Aluminum Trim Tab Anode 826134Q (Pack of 3)
The Mercury / Quicksilver 826134Q is a genuine OEM aluminum trim tab anode sold in a pack of 3, designed to provide sacrificial cathodic protection...
View full detailsMercury OEM Aluminum Anode 893404
Genuine Mercury OEM aluminum anode (893404) providing sacrificial cathodic protection for Mercury outboard and MerCruiser sterndrive trim tabs and ...
View full detailsAluminum Hanging Anode 11ft Cable CMT-GROUPERA
Marine-grade aluminum hanging anode (CMT-GROUPERA) with 11-foot cable providing supplemental sacrificial cathodic protection for docked or moored v...
View full detailsZinc OMC Block Anode CMT-393023Z
The CMT-393023Z is a zinc block anode designed for OMC, Johnson, and Evinrude outboard and sterndrive gearcases, providing essential protection aga...
View full detailsZinc OMC Curved Block Anode CMT-431708Z
The CMT-431708Z is a curved block zinc anode designed for OMC sterndrive systems, providing essential protection against galvanic corrosion for the...
View full detailsMercury Verado Pro Series Aluminum Anode Kit CMT-8M0116590KITA
The CMT-8M0116590KITA is a complete aluminum anode kit designed for Mercury Verado Pro Series L6 350–400HP outboards, replacing all factory-install...
View full detailsZinc Engine Anode E2 7/16" UNC CMT-EZ2
The CMT-EZ2 is a zinc pencil engine anode (E-2 type) with 7/16"-14 UNC thread, designed to protect internal engine cooling passages from galvanic c...
View full detailsReliance X-40 Hull Zinc Anode
The Reliance X-40 is a zinc hull anode designed for bolt-on installation, providing reliable sacrificial corrosion protection for boat hulls and bo...
View full detailsZinc OMC Block Anode CMT-984547Z
The CMT-984547Z is a zinc block anode designed for OMC Cobra sterndrives, providing sacrificial corrosion protection for the transom, gimbal plate,...
View full detailsZinc Rudder Anode 5" CMT-R04
The CMT-R04 is a 5" zinc rudder anode (R-4 style) designed to protect rudders and trim tabs from galvanic corrosion in saltwater environments. This...
View full detailsZinc Rudder Anode 5-1/8" CMT-R05
The CMT-R05 is a 5-1/8" zinc rudder anode (R-5 style) designed to protect rudders and trim tabs from galvanic corrosion in saltwater environments. ...
View full detailsYamaha Internal Engine Anode 6E5-11325-00-00
The Yamaha 6E5-11325-00-00 is a genuine OEM internal zinc engine anode designed to protect internal engine components such as the cylinder head, cr...
View full detailsYamaha Internal Engine Anode 6P3-11325-00-00
The Yamaha 6P3-11325-00-00 is a genuine OEM internal zinc engine anode designed to protect critical internal engine components such as the cylinder...
View full detailsZinc Shaft Anode MDX-5 1-1/4"
The MDX-5 is a zinc shaft anode designed for 1-1/4" propeller shafts, providing essential sacrificial protection for inboard running gear. Installe...
View full detailsZinc Engine Anode E3 1/2" UNC CMT-EZ3
The CMT-EZ3 is a zinc engine anode (E3 style) with 1/2" UNC thread, designed to protect internal engine cooling systems from galvanic corrosion. In...
View full detailsZinc Engine Anode E4 1/2" UNC CMT-EZ4
The CMT-EZ4 is a zinc engine anode (E4 style) with 1/2" UNC thread, designed to protect internal engine cooling systems from galvanic corrosion. In...
View full detailsZinc Shaft Anode MDX-7 1-1/2"
The MDX-7 is a sacrificial zinc shaft-style anode designed to protect outboard and inboard drivetrain components from galvanic corrosion. Installed...
View full detailsYamaha Zinc Internal Engine Anode 67F-11325-01-00
The Yamaha 67F-11325-01-00 is a genuine OEM internal zinc engine anode designed to protect critical internal components such as the cylinder head a...
View full detailsYamaha Internal Anode Grommet 67F-11328-01-00
Yamaha OEM Grommet, Anode 67F-11328-01-00 Price not available•See merchants Price not available•See merchants Yamaha I...
View full detailsZinc Engine Anode E1H 3/8" UNC CMT-EZ1H
The CMT-EZ1H is a zinc engine anode (E1H style) with 3/8" UNC thread, designed to protect internal engine cooling systems from galvanic corrosion. ...
View full detailsZinc Rudder Anode 1-7/8" CMT-R01
The CMT-R01 is a 1-7/8" round zinc rudder anode designed to protect rudders and trim tabs from galvanic corrosion. This two-piece “pancake” style a...
View full detailsAluminum Side Power Propeller Anode CMT-SGSP626A
The CMT-SGSP626A is a marine-grade aluminum propeller anode designed specifically for Side-Power (Sleipner) thruster propeller systems. Mounted dir...
View full detailsYamaha Engine Anode 68V-11325-01-00
The Yamaha 68V-11325-01-00 is a genuine OEM internal engine anode designed to protect critical engine components from galvanic corrosion. Installed...
View full detailsYamaha Anode 6AW-1132L-00-00
The Yamaha 6AW-1132L-00-00 is a genuine OEM internal engine anode designed to protect critical internal components from galvanic corrosion. Install...
View full detailsZinc Engine Anode E1 3/8" UNC CMT-EZ1
The CMT-EZ1 is a zinc engine anode with 3/8" UNC thread, designed to protect internal engine cooling passages and components from galvanic corrosio...
View full detailsZinc Rudder Anode 3-3/4" 64157
The 64157 is a 3-3/4" zinc rudder anode designed to protect rudders and associated underwater hardware from galvanic corrosion. This two-piece (cla...
View full details