Skip to content
Celebrating over 50 years of Trusted Marine Service
Over 50 years of Trusted Marine Service

Tools & Installation

Marine Tools & Installation

Marine Tools, Installation Supplies & Project Hardware

Shop marine tools, installation supplies, adhesives, sealants, drill bits, hole saws, fasteners, testing tools, protective gear, and project accessories for clean boat maintenance, repair, and installation work.

Shop Tools & Installation Sealants Hole Saws
Project Check

Plan the tool, fastener, sealant, drill size, backing, protection, and cleanup supplies before opening up the boat.

Ask Parts Desk

Use tools and supplies selected for marine environments. Confirm material compatibility, cure time, PPE needs, torque requirements, and manufacturer instructions before starting installation work.

Quick ShopProject PlanningTool TypesInstall NotesSafetyFAQFastenersDeck Hardware

Planning

Gather the Whole Job Before You Drill

Marine projects often need more than the main part. Plan fasteners, drill bits, sealant, backing plates, terminals, tape, PPE, cleanup supplies, and access tools before starting.

Masking TapeDrill BitsBacking Plates

Marine Use

Use Products That Handle Water and Vibration

Boats move, flex, vibrate, and live around saltwater. Marine-grade sealants, stainless fasteners, proper terminals, UV-tolerant materials, and corrosion-aware tools help installations last.

For below-waterline, fuel, electrical, or safety-critical projects, follow the product manual and applicable marine standards.

TLS

Tools

Hand tools, power-tool accessories, cutting tools, taps, dies, measuring tools, and electrical testers support accurate work.

BND

Bonding & Sealing

Sealants, adhesives, epoxies, bedding compounds, and tapes help prevent leaks and secure hardware.

PPE

Protection & Cleanup

Gloves, eye protection, respirators, absorbents, cleaners, and polish supplies make projects cleaner and safer.

Install Notes

Dry Fit, Mark, Drill, Seal, and Check

A clean installation usually starts with a dry fit and careful layout. Measure twice, protect the surface, drill the right pilot hole, seal penetrations, and inspect the finished work.

Dry fit firstConfirm clearances, backside access, cable paths, and fastener length before drilling.
Protect surfacesUse tape, pads, drop cloths, and the right cutting speed to avoid chips and scratches.
Seal penetrationsUse the correct sealant or bedding compound where water can enter the boat.
Clean and inspectRemove debris, check edges, verify torque, and look for leaks after the first use.

Safety

Use PPE for Cutting, Grinding, Chemicals, and Dust

Marine projects can involve fiberglass dust, solvents, adhesives, metal shavings, battery acid, fuel residue, and sharp hardware. Gloves, glasses, respirators, and ventilation matter.

GlovesSafety GlassesRespirators

Professional Results

The Finish Depends on the Prep

Good layout, clean edges, proper sealant choice, and correct hardware often matter as much as the part being installed.

Keep notes on fastener sizes, sealant type, wiring colors, fuse size, and service access for the next maintenance job.

FAQ

Tools & Installation Questions

What tools should I keep onboard?

A practical onboard kit often includes screwdrivers, pliers, wrenches, electrical testers, tape, spare fasteners, fuses, terminals, sealant, zip ties, a knife, and basic safety gear.

What sealant should I use on boat hardware?

It depends on the material, location, load, and whether the part may need removal later. Use the sealant or bedding compound recommended for the hardware and substrate.

Do I need special drill bits for fiberglass?

Sharp bits, hole saws, countersinks, and correct speed help reduce chipping. Tape and a careful pilot hole can improve results on gelcoat and fiberglass.

Why use marine-grade fasteners?

Marine-grade fasteners are selected for corrosion resistance and durability around water, vibration, and salt. Stainless grade, backing, washers, and sealant still need to match the job.

Ready for the Next Project?

Shop Marine Tools, Sealants, Fasteners & Installation Supplies

Search by project type, tool, adhesive, sealant, fastener size, drill accessory, safety gear, or installation task.

Shop Tools & InstallationFastenersSealants

Filters

2.5" China Ox Brush

2.5" China Ox Brush

$57.89 - $57.89
$57.89
$57.89 - $57.89
$57.89
Item locally warehoused

Excellent quality of blended natural bristle and ox hair. Enables extra smooth flow and even leveling out. Clear wood handle. Chisel trim.

$57.89 - $57.89
$57.89
$57.89 - $57.89
$57.89
Seachoice 93440 Paint Mix Container, 1/2 Pint

Seachoice 93440 Paint Mix Container, 1/2 Pint

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Item locally warehoused

Pre-marked so you can measure the exact amount of paint that you need.Lids sold separately.

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Redtree 36027 4" Mini Cigar Roller 1/2" Nap Refill 10/Pk

Redtree 36027 4" Mini Cigar Roller 1/2" Nap Refill 10/Pk

$55.29 - $55.29
$55.29
$55.29 - $55.29
$55.29
Item locally warehoused

Great for tight spots.Can be used with bottom paints.

$55.29 - $55.29
$55.29
$55.29 - $55.29
$55.29
Redtree 35014 4" Mini Plastic Tray

Redtree 35014 4" Mini Plastic Tray

$9.59 - $9.59
$9.59
$9.59 - $9.59
$9.59
Item locally warehoused

Great for tight spots.Can be used with bottom paints.

$9.59 - $9.59
$9.59
$9.59 - $9.59
$9.59
Redtree 14022 1.5" Chip Brush @ 36

Redtree 14022 1.5" Chip Brush @ 36

$1.69 - $1.69
$1.69
$1.69 - $1.69
$1.69
Item locally warehoused

An economical quality, throw away brush. Square trim, wood handle and bristle stock. Sold in Full Boxes Only.

$1.69 - $1.69
$1.69
$1.69 - $1.69
$1.69
3" Onyx Brush

3" Onyx Brush

$31.79 - $31.79
$31.79
$31.79 - $31.79
$31.79
Item locally warehoused

A better quality with chisel trim, painted foam black handle and 100% white china bristle.

$31.79 - $31.79
$31.79
$31.79 - $31.79
$31.79
Hyde 42036 Assorted Color Snap Knife, 9mm

Hyde 42036 Assorted Color Snap Knife, 9mm

$3.79 - $3.79
$3.79
$3.79 - $3.79
$3.79
Item locally warehoused

Built-in blade breaker. Retractable blade. High-impact polystyrene. 1 blade with 2-piece positive lock.

$3.79 - $3.79
$3.79
$3.79 - $3.79
$3.79
2.5" Onyx Brush

2.5" Onyx Brush

$40.29 - $40.29
$40.29
$40.29 - $40.29
$40.29
Item locally warehoused

A better quality with chisel trim, painted foam black handle and 100% white china bristle.

$40.29 - $40.29
$40.29
$40.29 - $40.29
$40.29
Seachoice 93430 Paint Mix Container, 5 Quart

Seachoice 93430 Paint Mix Container, 5 Quart

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Item locally warehoused

Pre-marked so you can measure the exact amount of paint that you need.Lids sold separately.

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Seachoice 93420 Paint Mix Container, 2.5 Quart

Seachoice 93420 Paint Mix Container, 2.5 Quart

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Item locally warehoused

Pre-marked so you can measure the exact amount of paint that you need.Lids sold separately.

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Seachoice 92926 Mini Roller Components, Acrylic, Yellow Stripe, 6", 2 Pack

Seachoice 92926 Mini Roller Components, Acrylic, Yellow Stripe, 6", 2 Pack

$5.79 - $5.79
$5.79
$5.79 - $5.79
$5.79
Item locally warehoused

Ideal for tight spaces.92901, 92926: 1/2" Solvent resistant nap can be used with all paints including bottom paints. 92911, 92924: Foam is used for...

View full details
$5.79 - $5.79
$5.79
$5.79 - $5.79
$5.79
Seachoice 92501 Heavy Duty 5mm Thick Foam Roller, 9"

Seachoice 92501 Heavy Duty 5mm Thick Foam Roller, 9"

$5.79 - $5.79
$5.79
$5.79 - $5.79
$5.79
Item locally warehoused

Rollers are extra thick for longer painting action. Great for tight spots. Can be used with bottom paints. Polypropylene core

$5.79 - $5.79
$5.79
$5.79 - $5.79
$5.79
Seachoice 92501 Foam Roller Covers, 3" Heavy Duty 5mm Thick

Seachoice 92501 Foam Roller Covers, 3" Heavy Duty 5mm Thick

$3.32 - $3.32
$3.32
$3.32 - $3.32
$3.32
Item locally warehoused

Rollers are extra thick for longer painting action. Great for tight spots. Can be used with bottom paints. Polypropylene core

$3.32 - $3.32
$3.32
$3.32 - $3.32
$3.32
Seachoice Paint Mix Container 1 Quart

Seachoice Paint Mix Container 1 Quart

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Item locally warehoused

Pre-marked so you can measure the exact amount of paint that you need.Lids sold separately.

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Seachoice 92311 Foam Roller Covers, 4" 3mm Thick

Seachoice 92311 Foam Roller Covers, 4" 3mm Thick

$3.90 - $3.90
$3.90
$3.90 - $3.90
$3.90
Item locally warehoused

Rollers are extra thick for longer painting action. Great for tight spots. Can be used with bottom paints. Polypropylene core

$3.90 - $3.90
$3.90
$3.90 - $3.90
$3.90
Seachoice 92321 Foam Roller Covers, 7" 3mm Thick

Seachoice 92321 Foam Roller Covers, 7" 3mm Thick

$4.62 - $4.62
$4.62
$4.62 - $4.62
$4.62
Item locally warehoused

Rollers are extra thick for longer painting action. Great for tight spots. Can be used with bottom paints. Polypropylene core

$4.62 - $4.62
$4.62
$4.62 - $4.62
$4.62
Seachoice 92511 Foam Roller Covers, 7" Heavy Duty 5mm Thick

Seachoice 92511 Foam Roller Covers, 7" Heavy Duty 5mm Thick

$4.91 - $4.91
$4.91
$4.91 - $4.91
$4.91
Item locally warehoused

Rollers are extra thick for longer painting action. Great for tight spots. Can be used with bottom paints. Polypropylene core

$4.91 - $4.91
$4.91
$4.91 - $4.91
$4.91
Seachoice 93400 Paint Mix Container, Pint

Seachoice 93400 Paint Mix Container, Pint

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Item locally warehoused

Pre-marked so you can measure the exact amount of paint that you need.Lids sold separately.

$0.09 - $0.09
$0.09
$0.09 - $0.09
$0.09
Seachoice 92331 3mm Thick Foam Roller, 9"

Seachoice 92331 3mm Thick Foam Roller, 9"

$5.94 - $5.94
$5.94
$5.94 - $5.94
$5.94
Item locally warehoused

Rollers are extra thick for longer painting action. Great for tight spots. Can be used with bottom paints. Polypropylene core

$5.94 - $5.94
$5.94
$5.94 - $5.94
$5.94
Seachoice 92223 Plastic Paint Tray Liner 9"

Seachoice 92223 Plastic Paint Tray Liner 9"

$7.24 - $7.24
$7.24
$7.24 - $7.24
$7.24
Item locally warehoused

Self-standing. Sturdy enough to be used outside a paint tray Economical Plastic Disposable Solvent resistant

$7.24 - $7.24
$7.24
$7.24 - $7.24
$7.24

West System G/Flex 655 Epoxy – Flexible Toughened Adhesive, 8 oz.

$44.99 - $44.99
$44.99
$44.99 - $44.99
$44.99
Only 1 left!

The Epoxy That Flexes With Your BoatStandard epoxies are rigid — and on a boat, rigid bonds can crack under the constant flex, vibration, and therm...

View full details
$44.99 - $44.99
$44.99
$44.99 - $44.99
$44.99

Mercury MerCruiser OEM Nut - Part 37500

$6.89 - $6.89
$6.89
$6.89 - $6.89
$6.89
Only 5 left!

Mercury MerCruiser OEM Replacement Nut — Part 37500Keep your Mercury or MerCruiser engine properly secured with this genuine OEM replacement nut. E...

View full details
$6.89 - $6.89
$6.89
$6.89 - $6.89
$6.89
2 Roloc Surface Cond. V Fine

2 Roloc Surface Cond. V Fine

$86.49 - $86.49
$86.49
$86.49 - $86.49
$86.49
Item locally warehoused

Quickly removes cork or paper gaskets and form-in-place gasket material prior to assembling drive train components, engine blocks, heads, and valve...

View full details
$86.49 - $86.49
$86.49
$86.49 - $86.49
$86.49
3 Roloc Surface Cond. Medium

3 Roloc Surface Cond. Medium

$207.39 - $207.39
$207.39
$207.39 - $207.39
$207.39
Item locally warehoused

Quickly removes cork or paper gaskets and form-in-place gasket material prior to assembling drive train components, engine blocks, heads, and valve...

View full details
$207.39 - $207.39
$207.39
$207.39 - $207.39
$207.39
2 Roloc Surface Cond. Medium

2 Roloc Surface Cond. Medium

$103.99 - $103.99
$103.99
$103.99 - $103.99
$103.99
Item locally warehoused

Quickly removes cork or paper gaskets and form-in-place gasket material prior to assembling drive train components, engine blocks, heads, and valve...

View full details
$103.99 - $103.99
$103.99
$103.99 - $103.99
$103.99
3M 07480 Roloc 2" Coarse (80-100) Brown Surface Conditioning Disc - 25 per Box

3M Roloc 2" Coarse Surface Conditioning Disc | 07480 | 25-Pack

$103.99 - $103.99
$103.99
$103.99 - $103.99
$103.99
Item locally warehoused

3M Roloc 2" Coarse Surface Conditioning Disc — 07480 | 25-PackStrip old gaskets fast and get surfaces ready for a clean, leak-free reassembly. The ...

View full details
$103.99 - $103.99
$103.99
$103.99 - $103.99
$103.99
Disposable Gloves, 4 Pr.

Disposable Gloves, 4 Pr.

$23.19 - $23.19
$23.19
$23.19 - $23.19
$23.19
Item locally warehoused

Disposable Gloves, 4 Pr. for light-duty protection and improved dexterity during maintenance, installation, and service tasks. Key Features Lightw...

View full details
$23.19 - $23.19
$23.19
$23.19 - $23.19
$23.19
Fillable Caulking Tubes (2/Pk)

Fillable Caulking Tubes (2/Pk)

$17.69 - $17.69
$17.69
$17.69 - $17.69
$17.69
Item locally warehoused

Large-volume, fillable caulking tubes designed for use with a standard caulking gun—ideal for applying thickened WEST SYSTEM® epoxy in long beads a...

View full details
$17.69 - $17.69
$17.69
$17.69 - $17.69
$17.69
West System 809 Notched Spreader, 36/case

West System 809 Notched Spreader, 36/case

$3.59 - $3.59
$3.59
$3.59 - $3.59
$3.59
Item locally warehoused

Lightweight and reusable West System 809 Notched Spreader for fairing and filling applications. Key Features Notched spreader for quickly applying...

View full details
$3.59 - $3.59
$3.59
$3.59 - $3.59
$3.59
Syringes (2/Pk)

Syringes (2/Pk)

$11.99 - $11.99
$11.99
$11.99 - $11.99
$11.99
Item locally warehoused

Syringes (2/Pk) are reusable epoxy-dispensing syringes designed for injecting epoxy mixture into tight spots—helpful for hardware bonding and plywo...

View full details
$11.99 - $11.99
$11.99
$11.99 - $11.99
$11.99
Static Mixer 2 Count Pk/2

Static Mixer 2 Count Pk/2

$12.69 - $12.69
$12.69
$12.69 - $12.69
$12.69
Item locally warehoused

Combines the strength and reliability of a two-part WEST SYSTEM® epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispen...

View full details
$12.69 - $12.69
$12.69
$12.69 - $12.69
$12.69
West System 806 Poly Mixing Pot, 32 oz., 180/case

West System 806 Poly Mixing Pot, 32 oz., 180/case

$5.09 - $5.09
$5.09
$5.09 - $5.09
$5.09
Item locally warehoused

West System 806 Poly Mixing Pot (32 oz) is a strong, reusable mixing container designed to make epoxy measuring and mixing cleaner and more conveni...

View full details
$5.09 - $5.09
$5.09
$5.09 - $5.09
$5.09
West System 805 Poly Mixing Pot, 16 oz., 240/case

West System 805 Poly Mixing Pot, 16 oz., 240/case

$5.49 - $5.49
$5.49
$5.49 - $5.49
$5.49
Item locally warehoused

West System 805 Poly Mixing Pot (655-805) is a strong, reusable mixing container designed for West System epoxy work—helping you mix thoroughly and...

View full details
$5.49 - $5.49
$5.49
$5.49 - $5.49
$5.49
Reusable Mixing Sticks (8/Pk)

Reusable Mixing Sticks (8/Pk)

$12.39 - $12.39
$12.39
$12.39 - $12.39
$12.39
Item locally warehoused

Reusable mixing sticks for epoxy work—made to help you mix thoroughly, apply smoothly, shape clean fillets, and clean up excess epoxy for repeated ...

View full details
$12.39 - $12.39
$12.39
$12.39 - $12.39
$12.39
Resin & Hardener Packets

Resin & Hardener Packets

$36.79 - $36.79
$36.79
$36.79 - $36.79
$36.79
Item locally warehoused

WEST SYSTEM 101T Resin & Hardener Packets provide convenient, pre-measured portions for mixing WEST SYSTEM 105 Resin with 205 Fast Hardener. Ke...

View full details
$36.79 - $36.79
$36.79
$36.79 - $36.79
$36.79
1/2 Glue Brushes (12/Pk)

1/2 Glue Brushes (12/Pk)

$16.89 - $16.89
$16.89
$16.89 - $16.89
$16.89
Item locally warehoused

A disposable WEST SYSTEM® glue brush pack for spreading 1/2" epoxy adhesive and coatings with a 6" metal handle—convenient for shop use and quick c...

View full details
$16.89 - $16.89
$16.89
$16.89 - $16.89
$16.89
Roller Covers, 7"

Roller Covers, 7"

$17.89 - $17.89
$17.89
$17.89 - $17.89
$17.89
Item locally warehoused

7" roller covers made from high-density polyurethane foam for applying WEST SYSTEM epoxy with smooth, controlled film thickness. Key Features High...

View full details
$17.89 - $17.89
$17.89
$17.89 - $17.89
$17.89
Low Density Filler - 12 oz.

Low Density Filler - 12 oz.

$115.89 - $115.89
$115.89
$115.89 - $115.89
$115.89
Item locally warehoused

WEST SYSTEM® Low Density Filler is a blended microballoon-based fairing filler for WEST SYSTEM® epoxy—made to help you create putties that are easy...

View full details
$115.89 - $115.89
$115.89
$115.89 - $115.89
$115.89
Colloidal Silica - 5.5 oz.

Colloidal Silica - 5.5 oz.

$57.49 - $57.49
$57.49
$57.49 - $57.49
$57.49
Item locally warehoused

A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. Very strong filler that ...

View full details
$57.49 - $57.49
$57.49
$57.49 - $57.49
$57.49
Colloidal Silica - 1.9 oz.

Colloidal Silica - 1.9 oz.

$32.99 - $32.99
$32.99
$32.99 - $32.99
$32.99
Item locally warehoused

A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. Very strong filler that ...

View full details
$32.99 - $32.99
$32.99
$32.99 - $32.99
$32.99
High Density Filler-43 oz.

High Density Filler-43 oz.

$91.89 - $91.89
$91.89
$91.89 - $91.89
$91.89
Item locally warehoused

WEST SYSTEM 404 High-Density Adhesive Filler is an epoxy thickening additive for building maximum-strength, high-cyclic hardware bonds. It also wor...

View full details
$91.89 - $91.89
$91.89
$91.89 - $91.89
$91.89
High-Density Filler-15.2 oz.

High-Density Filler-15.2 oz.

$43.69 - $43.69
$43.69
$43.69 - $43.69
$43.69
Item locally warehoused

WEST SYSTEM 404 High-Density Filler is a thickening additive used with epoxy to create a high-strength, non-slumping adhesive for hardware bonding,...

View full details
$43.69 - $43.69
$43.69
$43.69 - $43.69
$43.69
West System 4039 Microfibers, Off-White, 6 oz., 24/case

West System 4039 Microfibers, Off-White, 6 oz., 24/case

$36.19 - $36.19
$36.19
$36.19 - $36.19
$36.19
Item locally warehoused

WEST SYSTEM® 403 Microfibers is a fine fiber blend used to thicken epoxy into a multi-purpose adhesive—especially for bonding wood. This off-white ...

View full details
$36.19 - $36.19
$36.19
$36.19 - $36.19
$36.19
West System 40328 Microfibers, Off-White, 20 oz., 12/case

West System 40328 Microfibers, Off-White, 20 oz., 12/case

$70.99 - $70.99
$70.99
$70.99 - $70.99
$70.99
Item locally warehoused

WEST SYSTEM 40328 Microfibers is a fine fiber blend thickening additive that builds volume quickly and blends easily with epoxy to create a multi-p...

View full details
$70.99 - $70.99
$70.99
$70.99 - $70.99
$70.99
Mini Pump Set 300 for Group A, B, Or C

Mini Pump Set 300 for Group A, B, Or C

$43.49 - $43.49
$43.49
$43.49 - $43.49
$43.49
Item locally warehoused

The 300 Mini Pump Set, containing three pumps-the 105 Resin pump, a 205/206 Hardener pump (5:1 ratio), and a 207/209 Hardener pump (3:1 ratio). Des...

View full details
$43.49 - $43.49
$43.49
$43.49 - $43.49
$43.49

Ancor Premium Marine Electrical Tape | 5-Roll Assorted Colour Pack | 639-339066

$12.59 - $12.59
$12.59
$12.59 - $12.59
$12.59
Item locally warehoused

Ancor Premium Marine Electrical Tape — 5-Roll Assorted Colour Pack Part / Item Number: 639-339066  |  Brand: Ancor  |  UPC: 091887987096 Ancor 639-...

View full details
$12.59 - $12.59
$12.59
$12.59 - $12.59
$12.59
Premium Electrical Tape, White

Premium Electrical Tape, White

$15.29 - $15.29
$15.29
$15.29 - $15.29
$15.29
Item locally warehoused

Keep wiring connections secure with Premium Electrical Tape (White)—a general-purpose, low-lead 7-mil PVC tape rated up to 600V and designed for he...

View full details
$15.29 - $15.29
$15.29
$15.29 - $15.29
$15.29
Premium Electrical Tape, Red

Premium Electrical Tape, Red

$17.69 - $17.69
$17.69
$17.69 - $17.69
$17.69
Item locally warehoused

Premium red electrical tape for general-purpose electrical insulation and repairs, rated up to 600V and up to 105°C (220°F). Key Features Made fro...

View full details
$17.69 - $17.69
$17.69
$17.69 - $17.69
$17.69