Volvo Penta Insulation 3817196

Volvo Penta 3817196 is a genuine OEM insulation component used in Volvo Penta diesel exhaust-system service. The strongest current public parts-diagram trail places this part in the D6-300A-F inlet and exhaust system as schematic object key 11, grouped with the exhaust riser, V-clamp, hose, hose clamps, and temperature sensor. That gives it a strong application trail as the insulation piece used at that exact exhaust-side assembly position where 3817196 is called for. Some reseller catalogs label this number as “isolation,” but the clearest diagram-based Volvo-style reference identifies it as insulation in the exhaust assembly.

Key Features

• Genuine Volvo Penta OEM part, part number 3817196.
• Strongest current public diagram support places it in D6-300A-F / Inlet and Exhaust System.
• Listed as schematic object key 11 in that exhaust-system breakdown.
• Shown in the same assembly group as exhaust riser 23328236, exhaust riser kit 23957023, hose 21511542, and temperature sensor 21673187, which helps confirm its exact exhaust-side service position.
• Current public seller references list approximate weight around 0.124 to 0.135 kg.

Engine Compatibility

The strongest supportable fitment trail for Volvo Penta 3817196 is with D6-300A-F diesel applications in the inlet and exhaust system. Public sources I checked are much stronger on this exact assembly position than on a broad official model-family matrix, so the safest fitment standard is the exact Volvo Penta serial-number-based parts diagram for the engine being serviced.

Serial Number Fitment Notice

Fitment can vary by engine version, exhaust layout, and serial-number range. Confirm Volvo Penta part number 3817196 against your engine serial number and the correct Volvo Penta inlet and exhaust diagram before ordering, especially on D6 applications where nearby heat shielding, insulation, and clamp-supported exhaust parts can look similar once removed.

When This Part Needs Replacement

Replace this insulation piece when the original component is heat-damaged, torn, oil-soaked, deteriorated, missing, or no longer protecting the surrounding exhaust-side assembly correctly. It is also a smart replacement during adjacent exhaust-riser service if the original insulation has already been disturbed or shows visible age-related breakdown. This service guidance is based on the part type and its exhaust-side assembly role.

Installation Notes

Match this insulation component to the exact Volvo Penta application before installation. The strongest public reference places it in the D6-300A-F inlet and exhaust system near the exhaust riser and associated clamps and hose, so confirming both the part number and exact diagram location is the safest cross-check before ordering or reassembly. Inspect the surrounding clamps, hose, and sensor area at the same time to help avoid repeat exhaust-side service issues after reassembly.

Alternate/Superseded Part Numbers

Current public sources reviewed consistently present 3817196 as the active OEM ordering number. One reseller source notes it as superseded from 3817198, but the strongest diagram-based references center on 3817196 as the active service number. Use 3817196 as the primary Volvo Penta ordering number for this listing.

Parts Desk Insight

Exhaust-side insulation parts are easy to underestimate because they do not always look critical once the assembly is apart. Matching the exact Volvo Penta diagram position first is usually much safer than trying to compare a used shield or insulation piece by shape alone, especially around D6 exhaust-riser service.

Shipping: Ships same or next day for fast Canada wide shipping. ⚓