Volvo Penta 8.1L V8 Ignition Cable Kit - 3861295
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
The Volvo Penta 3861295 is a genuine Volvo Penta OEM ignition cable kit for select GM-based Volvo Penta 8.1L gasoline marine engines. This kit provides the high-tension spark plug leads used to carry ignition voltage from the coil/ignition system to the spark plugs, helping maintain clean spark delivery, stable idle, smooth acceleration, and proper combustion under marine load. It is used where the Volvo Penta parts diagram or service manual calls for 3861295.
Key Features
- Genuine Volvo Penta factory OEM ignition cable kit.
- Volvo Penta part number: 3861295.
- Complete spark plug wire set for V8 ignition service.
- Kit quantity: 8 ignition cables.
- Listed UPC reference: 025623697628.
- Used with select Volvo Penta 8.1L gasoline marine engines where specified.
- Helps restore proper ignition performance when original wires are aged, cracked, heat-damaged, or leaking voltage.
- Common tune-up companion to Volvo Penta 8.1L spark plug kit references such as 3861327 / 3861326, where specified by serial number and service manual.
Engine Compatibility
Common application groups include select Volvo Penta GM-based 8.1L V8 gasoline marine engines by engine model, serial number, and ignition layout, including:
- 8.1Gi applications where specified
- 8.1GXi applications where specified
- 8.1OSi applications where specified
- 8.1Gi-C / 8.1Gi-E applications where specified
- 8.1GXi-E applications where specified
- Select 8.1IPS applications where specified
- Additional 8.1L model suffixes where the Volvo Penta parts diagram calls for 3861295
Use this ignition cable kit only where the Volvo Penta parts diagram or service manual specifically calls for 3861295.
Serial Number Fitment Notice
Confirm fitment by Volvo Penta engine serial number, exact 8.1L model suffix, ignition system layout, and spark plug wire routing before ordering. Volvo Penta 8.1L engines can use different ignition wire sets depending on production range, coil location, exhaust layout, and service updates.
When This Part Needs Replacement
Replace the ignition cable kit during scheduled ignition tune-up service or when the original wires are cracked, brittle, oil-soaked, heat-damaged, corroded at the terminals, loose at the boots, or showing signs of voltage leakage. Replacement may also be needed if the engine has a rough idle, hard starting, hesitation, ignition misfire, reduced power under load, or moisture-related spark issues after the spark plugs, coils, fuel system, and engine condition have been checked.
Installation Notes
Replace one wire at a time or label the original routing before removal to avoid crossing ignition leads. Route each cable in the same path as the original harness, keeping the wires away from hot exhaust surfaces, sharp edges, belts, and moving parts. Inspect the spark plugs, plug boots, coil terminals, wire separators, and retaining clips during installation. Make sure each boot is fully seated at both ends before starting the engine.
Alternate/Superseded Part Numbers
- 3861295 — Volvo Penta ignition cable kit
- 84-881698 / 84-881698T — Mercury Marine cross-reference; verify by application
- RK120019 — Crusader / PCM cross-reference; verify by application
- 756003 — Indmar cross-reference; verify by application
Parts Desk Insight
Ignition cable fitment should be confirmed by engine serial number and routing layout, not just by engine displacement. On 8.1L marine engines, wire length, boot angle, heat exposure, and coil location all matter. A correct cable set helps prevent crossfire, voltage leakage, misfires, and poor running under load.
Shipping: Ships same or next day for fast Canada wide shipping. ⚓
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 3–4 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.