Ancor Shielded Twisted Pair Cable | 14/2 AWG, 100 ft, White Jacket
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Ancor 14/2 AWG Shielded Twisted Pair Cable — 100 ft, White Jacket
Purpose-built for installations where electromagnetic interference is a real concern. This 100-foot spool of Ancor shielded twisted pair cable combines a 93% tinned copper braid shield with a twisted conductor pair — two of the most effective techniques for rejecting EMI and RFI noise in marine electrical systems.
The twisted pair geometry cancels out induced noise along the cable run, while the dense tinned copper shield intercepts external interference before it reaches the conductors. Together, they make this cable the right choice for sensitive electronics, metal hull vessels, and any installation where unshielded wire would pick up interference from engines, alternators, inverters, or nearby radio equipment.
Conductors are ABYC color-coded and built on Ancor’s tinned copper wire platform — corrosion-resistant at every connection point and rated for the full range of marine environmental conditions.
Compatible Applications
- Instrument and sensor wiring on metal (steel or aluminum) hulls
- NMEA 0183 and analog instrument signal runs
- Depth sounder, speed, and temperature transducer wiring
- Audio signal runs near high-current or RF-generating equipment
- Autopilot feedback and control wiring
- Any low-voltage signal circuit requiring EMI/RFI shielding
Key Features
- 93% tinned copper braid shield for maximum EMI/RFI rejection
- Twisted pair geometry provides additional noise cancellation
- ABYC color-coded conductors for compliant, inspection-ready installations
- 100% tinned copper conductors resist corrosion in marine environments
- White round jacket — clean appearance, easy to route and secure
- 14 AWG / 2 conductor / 100-foot spool
- Recommended for all metal boats and installations near sensitive electronics
Parts Desk Insights
This is a specialized cable — most installations don’t need shielded twisted pair, but when they do, nothing else will solve the problem. If you’re seeing interference on instrument displays, erratic depth sounder readings, or noise in your audio system that correlates with engine RPM or alternator load, shielded twisted pair on the affected signal runs is the correct fix. It’s also the standard choice for any signal wiring on steel or aluminum hulls, where the hull itself can act as an antenna and couple noise into unshielded cables. The 14 AWG gauge gives you a bit more current capacity than typical signal wire, making it a good choice for longer runs where voltage drop on low-current circuits could otherwise be an issue. Ground the shield at one end only (typically the source/equipment end) to avoid creating a ground loop.
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 1-3 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.