Minn Kota 1866070 Corded Foot Pedal – PowerDrive, PowerDrive V2, Riptide PowerDrive & Riptide SP

Part Information

• Part Number: 1866070
• SKU: 27-1866070
• Brand: Minn Kota
• Official Product Type: Corded Trolling Motor Foot Pedal
• UPC: 029402044313
• Cord Length: 18 ft (5.5 m)
• Connector: Waterproof round plug (2007-and-newer style)

What This Part Does

The Minn Kota 1866070 is the corded foot pedal for compatible PowerDrive and Riptide PowerDrive series trolling motors manufactured from 2007 onward. It gives you hands-free, foot-operated control of steering direction, propeller on/off, and motor speed — keeping your hands free for casting and fighting fish while your trolling motor responds to foot pressure and the speed knob.

Key Features

• Side-to-side steering control via foot pressure
• Momentary / Constant ON switch for propeller operation
• Variable speed-control knob for precise motor speed adjustment
• 18 ft (5.5 m) cord for positioning flexibility in the bow
• Waterproof connector plug — direct plug-and-play connection to compatible motors

Compatible Applications

• Minn Kota PowerDrive (2007 and newer)
• Minn Kota PowerDrive V2 (2007 and newer)
• Minn Kota Riptide PowerDrive (2007 and newer)
• Minn Kota Riptide SP (2007 and newer)

Fitment Notice — Please Read Before Ordering

• 2006 and older PowerDrive / Riptide motors: Not compatible. Older models use a flat-plug connector style that does not accept this pedal.
• PowerDrive motors with Advanced GPS, i-Pilot, or i-Pilot Link: Not compatible. These models use GPS-based steering control and do not support foot-pedal operation due to their hardware and software configuration.
• Terrova, Ulterra, and Instinct QUEST motors: Not compatible. These require a different pedal — see the Minn Kota 1866078 Corded Foot Pedal for Terrova QUEST / Riptide Terrova QUEST, or the Minn Kota 1866082 Corded Foot Pedal for Riptide Instinct QUEST / Ulterra QUEST.

Related Part Numbers

• 1866070 — This part. PowerDrive / PowerDrive V2 / Riptide PowerDrive / Riptide SP (2007+)
• 1866066 — PowerDrive V2 corded foot pedal variant (contact us for availability)
• 1866040 — Legacy PowerDrive corded foot pedal (pre-2007 flat-plug models; contact us for availability)

Compatible Motors Available

• Minn Kota PowerDrive 45 lb. Thrust, 48" Shaft, 12V
• Minn Kota PowerDrive 55 lb. Thrust, 54" Shaft, 12V
• Minn Kota PowerDrive 70 lb. Thrust, 60" Shaft, 24V
• Minn Kota Riptide PowerDrive 55 lb. Thrust, 54" Shaft, 12V
• Minn Kota Riptide PowerDrive 70 lb. Thrust, 54" Shaft, 24V

Parts Desk Insights

Best Use Case: This is the go-to replacement pedal for anglers running a PowerDrive or Riptide PowerDrive with the round waterproof connector (2007-model-year and newer). If your existing pedal has a sticky or unresponsive steering mechanism, a worn speed knob, or a damaged cord or connector, replacing the pedal is typically more cost-effective than motor service. It's also the correct choice when adding foot-pedal control to a used PowerDrive motor that came without one.

Common Issues: The most frequent ordering mistake is selecting this pedal for a motor that's i-Pilot or i-Pilot Link equipped — those motors steer via GPS and won't accept foot-pedal input regardless of the connector. If you're unsure whether your motor has i-Pilot, check the motor head: i-Pilot models have a GPS receiver housing on or near the motor head. The second common issue is fitting this to a pre-2007 motor with a flat rectangular connector — if your current pedal has a flat plug, this round-connector pedal will not physically connect.

Installation Notes

• Align the waterproof connector and press firmly until it seats and locks
• Route the 18 ft cord along the gunwale or under carpet to keep it clear of the casting deck
• Keep the cord away from pinch points, cleats, and deck hardware
• After connection, test steering left/right, propeller Momentary and Constant ON, and speed control before heading out

Service Interval

No scheduled service interval. Inspect the cord for cuts, kinks, and abrasion annually or before each season. Clean the waterproof connector with fresh water after saltwater use. Check the steering mechanism and control knob for smooth operation. Replace if steering becomes intermittent, the switch or speed knob fails to respond, or the connector is damaged.

Technical FAQ

• How do I know if my motor takes the 1866070 pedal? Your motor must be a PowerDrive, PowerDrive V2, Riptide PowerDrive, or Riptide SP made in 2007 or later with a round waterproof connector on the motor head. If your current pedal has a flat rectangular plug, your motor uses a different pedal.
• Will this work on my i-Pilot PowerDrive? No. PowerDrive motors equipped with i-Pilot or i-Pilot Link use GPS-based steering and are not designed to accept foot-pedal control. Check your motor's model designation — i-Pilot models will be labelled accordingly.
• Can I use this pedal with a Terrova or Ulterra? No. The 1866078 is for Terrova QUEST and Riptide Terrova QUEST, and the 1866082 is for Riptide Instinct QUEST and Ulterra QUEST.
• Is the 18 ft cord long enough for a larger boat? 18 ft covers most typical bow-mount installations from the motor to the front casting deck. On longer vessels, the cord may need to be routed carefully or a cord extension considered.
• Is this pedal waterproof? The connector is waterproof. The pedal body is designed for marine use but should be rinsed with fresh water after saltwater exposure and stored out of direct sun when not in use.