Golight Stryker ST LED Searchlight – White, Wireless Remote – 30004ST

Golight Stryker ST LED Searchlight – White, Wireless Remote – 30004ST

What This Searchlight Does

The Golight Stryker ST 30004ST is a high-output fixed-mount LED searchlight with full wireless remote control. Its 10 high-flux LEDs deliver 544,000 candela through a focused 8° beam with a maximum throw of 4,839 ft — powerful enough for long-range target identification at night. The motor-driven head rotates 370° and tilts 135°, with the ability to pan and tilt simultaneously from the remote, giving the operator full directional control without leaving the helm or leaving a station. A one-touch return-to-home function resets beam position quickly between tasks.

The white housing is UV-resistant and saltwater-resistant, making it suitable for permanent deck and cabin-top installations on marine vessels and commercial work platforms.

Compatible Applications

• Marine vessels: recreational powerboats, yachts, commercial fishing vessels, workboats
• Docking and night-running illumination
• Search-and-rescue lighting
• Tender retrieval and anchoring assistance
• Dock and marina fixed-mount lighting
• Fleet vehicles, utility trucks, and work vehicles
• Night-operations lighting where long-range remote beam control is required

Kit Contents

• Golight Stryker ST searchlight head (30004ST)
• Wireless dash-mount remote
• Hardwired dash-mount remote
• Stainless steel mounting bracket and hardware

Related Products

• Golight Stryker ST LED Searchlight – GLT30514ST
• Golight Stryker ST LED Remote Control Light – Hardwired White
• Golight Stryker ST LED Remote Control Light – Hardwired Black
• Golight RadioRay Halogen Searchlight – Gray, Magnetic Shoe Mount

Fitment Notice

Confirm the following before installation:

• Mounting surface is solid, flat, and positioned where the lamp head can rotate and tilt freely without obstruction
• 12V DC power is available at the mounting location with sufficient current capacity (40W / 3.7A)
• Wiring run from the mounting location to the dash remote position is feasible
• Full 370° rotation and 135° tilt arc are clear of rigging, antennas, and other fixtures

Installation Notes

• Mount using the included stainless steel bracket on a rigid surface
• Use marine-grade wiring practices: tinned copper, correct gauge for the run length, fused at the supply
• Route wiring away from heat sources, sharp edges, and moving parts
• Verify polarity before applying power
• Test full pan/tilt range and remote function before finalizing the installation
• The multi-light selection function on the remote allows independent control of two Stryker ST lights from a single remote

When to Replace

• LED output becomes weak, intermittent, or fails
• Pan or tilt motor fails or moves erratically
• Remote no longer reliably controls the light
• Housing is cracked, corroded, or water has entered the head
• Unit no longer provides reliable illumination for safe operation

Service Interval

No scheduled service interval. Inspect the mounting bracket, wiring connections, and housing seal annually or before the start of each season. Clean the lens and inspect for UV degradation or saltwater corrosion at the hardware. LEDs are rated for long service life and are not field-replaceable — replace the unit if LED output fails.

Technical FAQ

Does 30004ST include a wireless remote?
Yes. The 30004ST comes with both a wireless dash-mount remote and a hardwired dash-mount remote. The hardwired version of this light without wireless capability is a separate model.

Can one remote control two lights?
Yes. The Stryker ST remote has a multi-light selection function that allows one remote to independently control two Stryker ST lights — useful for vessels with port and starboard searchlights.

What is the difference between 30004ST and 30514ST?
Both are Stryker ST series lights. Check the 30514ST listing for specific differences in color, mounting configuration, or included accessories.

Is the housing waterproof?
The Stryker ST housing is UV-resistant and saltwater-resistant and is designed for permanent marine installation. It is not intended for submersion. Install in a location where it will not be regularly submerged.

What voltage does this light require?
12V DC only. Confirm your vessel’s electrical system is 12V before ordering. A 24V system will require a voltage converter.

Parts Desk Insights

The Stryker ST comes up when a customer needs both raw output and beam placement control — the 544,000 candela throw is impressive, but the real advantage is being able to steer the beam from the helm without leaving the wheel. It is particularly useful for solo-operated vessels where leaving the helm at night to point a fixed light is not practical. The most common installation question is around mounting clearance: the 370° rotation needs clear arc, so check that antennas, rails, and rigging are not going to obstruct the head before committing to a mounting location.