Johnson Pump 09-849P-2 Impeller Kit – Talulah HF High Flow Ballast Pump
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Johnson Pump 09-849P-2 Impeller Kit – Talulah HF High Flow Ballast Pump
Part Information
- Part Number: 09-849P-2
- Brand: Johnson Pump / SPX Flow
- Official Product Type: Replacement Impeller Kit
- For Pump: Johnson Pump Talulah HF Ballast Pump 10-24939-18 – 12V | 30 GPM
- Impeller Blades: 6
- System: Ballast Fill / Drain – Reversible
- UPC: 729321031899
What This Kit Is For
The 09-849P-2 is the genuine replacement impeller kit for the Johnson Pump Talulah HF (High Flow) ballast pump. The Talulah HF is rated at 30 GPM (113.6 L/min) at 1 ft of lift using 1-1/2 in. (38 mm) hose connections and operates on 12V DC in a reversible fill-and-drain configuration. This kit restores full pumping performance when the impeller has worn or been damaged.
Important: This is the HF (High Flow) impeller kit. The standard Talulah ballast pump uses a different impeller — Johnson Pump 09-824P-2. Always confirm your pump number before ordering.
Compatible Applications
- Johnson Pump Talulah HF High Flow Ballast Pump – 10-24939-18 (102493918)
- Wake and watersports boats using the Talulah HF ballast system
- Any installation where the pump housing is stamped or labeled 10-24939-18
Fitment Confirmation
Locate the pump part number on the pump housing label or documentation. Confirm it reads 10-24939-18 (also formatted as 102493918) before ordering. Johnson Pump’s Talulah and Talulah HF pumps look similar but use different impeller kits.
When to Replace
- Ballast fill or drain times have increased noticeably
- Flow is inconsistent or the pump runs with little to no output
- Impeller blades are cracked, torn, worn, or permanently distorted
- Pump has experienced repeated or extended dry-running
- Reversing direction becomes unreliable
- Service history of the current impeller is unknown
Service Interval
Johnson Pump does not publish a fixed hour-based interval for the Talulah HF impeller. Inspect the impeller annually or whenever ballast performance declines. The impeller compound is designed to tolerate brief dry-run events (approximately 30 seconds when wet with residual water), but extended dry-running will accelerate wear and should be avoided.
Installation Notes
Disconnect 12V power to the pump before servicing. Remove the pump cover and inspect the housing bore for scoring, debris, or fragments from the previous impeller — clear any debris before installing the new impeller. Lubricate the impeller with Johnson Pump impeller lubricant or the lubricant specified in the pump instructions. Install in the correct rotation orientation. After reassembly, test both fill and drain directions and check all hose connections for leaks.
Technical FAQ
Q: Will 09-849P-2 fit my standard Talulah pump (not the HF)?
A: No. The standard Talulah pump (10-24690 / 102469018) uses impeller kit 09-824P-2. The HF and standard Talulah impellers are not interchangeable.
Q: How many blades does this impeller have?
A: 6 blades.
Q: Can I dry-run the Talulah HF briefly during installation?
A: Johnson Pump states the impeller compound is designed to tolerate short dry-run events (approximately 30 seconds) when the impeller is still wet. Avoid sustained dry-running.
Related Products
- Johnson Pump Talulah HF Ballast Pump – 12V | 30 GPM (10-24939-18)
- Johnson Pump 09-824P-2 Impeller Kit – Standard Talulah Ballast Pump
- Johnson Pump Talulah Standard Ballast Pump – 12V | 13.5 GPM
Alternate Part Numbers
- Johnson Pump 09-849P-2
- 09849P2
- 189-09849P2
- 189-09849P2F1
- Compatible pump: 10-24939-18 / 102493918
Parts Desk Insights
The HF designation is the critical detail here — this is a 30 GPM high-flow pump, and its impeller is not the same as the standard Talulah. The most common ordering mistake is customers who have the standard Talulah pump picking up the HF impeller kit (or vice versa). Pull the pump number off the housing before ordering. If you’re replacing the impeller due to slow ballast times rather than visible damage, also inspect the hose and fittings for kinks or restrictions before assuming the impeller is the cause.
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 1-3 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.