KiwiGrip Non-Skid Deck Coating | Cream | 1 Gallon | Rollable Anti-Slip Surface Treatment

Rollable Non-Skid Deck Coating in Cream — 1-Gallon Size for Full Deck Applications.

KiwiGrip is a water-based, non-skid deck coating that applies with a roller to create a durable, grippy surface on boat decks, cockpits, and other marine surfaces. The 1-gallon size covers approximately 8 square meters (~80 sq ft) — enough for a full cockpit, swim platform, or large deck area in a single purchase.

Unlike grit-based non-skid products, KiwiGrip's texture is built into the coating itself — so the color and grip are consistent throughout the film and won't wear through to expose filler materials underneath. The texture is adjustable: by varying your roller technique, you can dial in anything from a fine, comfortable grip to an aggressive, high-traction surface.

Packaged in 4 resealable pouches for easy use and storage of leftover product. A 4-inch proprietary roller cover is included.

Key Features

• Cream color — UV stabilized for consistent color retention
• 1-gallon size — covers approximately 8 sq m (~80 sq ft)
• Adjustable texture — fine to aggressive grip, controlled by roller technique
• Hard acrylic polymer construction — durable, elastic, homogeneous anti-skid surface
• Homogeneous color throughout — won't wear through to expose filler materials
• Low-glare, IR-reflective finish — stays cooler underfoot in direct sun
• Applies over fiberglass, wood, epoxy, concrete, or metal (with appropriate primers)
• Rolls directly over worn non-skid surfaces with only a scrub and scuff — no grinding or sanding smooth required
• Non-toxic, no volatile solvents — cleans up with soap and water
• 4-inch proprietary roller cover included
• Packaged in 4 resealable pouches

Compatible Applications

• Full cockpit, swim platform, or large deck area re-coating
• Boat decks, helm areas, and high-traffic deck surfaces
• Fiberglass, wood, epoxy, concrete, and metal surfaces (with appropriate primers)
• Refresh and repair of worn or faded factory non-skid surfaces on production fiberglass boats
• Any marine or outdoor surface where a durable, rollable non-skid coating is required

Parts Desk Insights

KiwiGrip Cream in the gallon size is the right choice for a full deck re-coat on boats where cream closely matches the original factory non-skid — particularly older production fiberglass boats from the 1980s and 1990s where off-white and cream were the standard deck color. At ~80 sq ft per gallon, it covers most cockpit soles and side decks on boats up to about 35 feet. Cream is also a practical choice for blending new non-skid into existing areas, as slight color variation is less visible than with more saturated colors. The 4-pouch packaging lets you use one pouch at a time and keep the rest sealed until needed.

For smaller touch-up quantities, see the KiwiGrip Cream 1-Quart. Also available in gallon size in Black, Blue, and Grey. Browse our full Paint & Coatings collection.