Lowrance 000-0127-53 N2KEXT-6RD NMEA 2000 Network Extension Cable — 6 ft

Lowrance 000-0127-53 N2KEXT-6RD — NMEA 2000 Network Extension Cable, 6 ft

Overview

The Lowrance 000-0127-53 N2KEXT-6RD is a 6-foot NMEA 2000 network extension cable designed to lengthen a backbone segment or extend the reach of a drop cable to a network device. It uses standard Micro-C NMEA 2000 connectors and is compatible with any properly wired NMEA 2000 network regardless of brand. The 6-foot length is a practical choice when a 2-foot drop is too short but a 15-foot run would create excess slack.

Key Features

• 6 ft (1.82 m) NMEA 2000 extension cable — male-to-female Micro-C connectors
• Extends backbone segments or adds reach to existing drop cable runs
• Compatible with all standard NMEA 2000 Micro-C networks regardless of brand
• Weather-resistant marine-grade construction
• Straightforward plug-and-play installation — no tools required

Compatible Applications

• Extending an NMEA 2000 backbone segment where existing cables are too short
• Adding reach to a T-connector drop cable to reach a sensor or display
• Lowrance HDS, Elite, and HOOK series chartplotter/fishfinder networks
• Simrad NSS, NSO, GO, and Cruise series NMEA 2000 networks
• B&G Zeus, Vulcan, and Triton series networks
• Garmin echoMAP and GPSMAP series NMEA 2000 networks
• Any standard Micro-C NMEA 2000 backbone installation

Technical Notes

• NMEA 2000 networks have a maximum total backbone length of 100 meters — count all extension cables toward this limit
• Drop cables (device connections) are limited to 6 meters total length per drop
• Every NMEA 2000 backbone must be terminated at both ends with 120-ohm terminators
• All connectors must be fully seated and locked to maintain network integrity
• Mixing connector standards (e.g., Micro-C and Mini-C) requires an adapter and is not recommended for new builds

Parts Desk Insights

Best Use Case: This is the right cable when a customer is adding a new sensor or display to an existing NMEA 2000 network and needs a bit more reach than a standard drop cable provides, or when two backbone segments need bridging and the gap is in the 4–6-foot range. It’s one of the most commonly reached-for cables during a network expansion or instrument refit.

Common Issues: Customers occasionally try to daisy-chain multiple extension cables to cover long runs, which can work up to the backbone length limit but creates more potential failure points. A longer single cable or a properly planned backbone layout is preferable. The other common call is network drop-outs after installation — almost always caused by a connector that isn’t fully clicked and locked, or a missing terminator at one end of the backbone.

Related Products

• Lowrance 000-0119-88 N2KEXT-2RD NMEA 2000 Network Extension Cable — 2 ft
• Lowrance 000-0119-86 N2KEXT-15RD NMEA 2000 Network Extension Cable — 15 ft
• Lowrance 000-0119-79 N2K-T-RD NMEA 2000 T-Connector
• Lowrance TR-120-Kit NMEA 2000 Terminating Kit
• Lowrance 000-0120-37 Yamaha Engine Interface Cable for NMEA 2000
• Lowrance 000-0127-49 PC-30-RS422 Power & NMEA 0183 Cable