March Pumps Centrifugal Pump - LC-3M-MD 115V | 0130-0177-0100
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
March Pumps LC-3M-MD Magnetic-Drive Pump, 115 V | 0130-0177-0100
Product Description
March Pumps 0130-0177-0100 is the 115 V single-phase LC-3M-MD seal-less centrifugal pump, with an encapsulated liquid-cooled motor for submerged or open-air installation. It uses magnetic drive rather than a rotating shaft seal for compatible marine water-circulation systems.
Key Features
- 115 VAC, 50/60 Hz; 0.05 HP at 60 Hz
- 60 Hz maximum flow: 8.5 GPM; maximum head: 19 feet
- 50 Hz maximum flow: 8.2 GPM; maximum head: 14.1 feet
- 3/4-inch female NPT inlet; 1/2-inch male NPT outlet
- Polypropylene housings and impeller, carbon impeller bushing, ceramic shaft and thrust washer, cupric-nickel cooling tube
- Maximum internal pressure: 25 PSI; maximum liquid temperature: 54°C
- IP67; ignition protected per SAE J1171 and ISO 8846
- Overall dimensions (L x W x H): 7.38 x 5.56 x 5.55 inches
- Manufacturer part number: 0130-0177-0100
- Sold as: EA
Product Compatibility
Match the full LC-3M-MD part number, 115 V supply, frequency, connections and operating point. Confirm fluid compatibility and required flow using the manufacturer curve. Use a flooded inlet and follow the installation requirements for the selected mounting position.
When This Part Needs Replacement
Check the intake, strainer, hoses and trapped air before replacing a pump with reduced flow. Inspect the impeller and supports if noise or poor circulation remains after the supply is restored.
Installation Notes
Disconnect power and isolate the fluid circuit before service. These centrifugal pumps are not self-priming: fill the pump and maintain flooded suction. Do not run dry. Follow the motor label, wiring instructions and applicable electrical requirements.
Manufacturer Schematic / Parts Diagram
View manufacturer parts diagram and service reference
Parts Desk Insight
This is the 115 V model. Check the motor label as well as the pump family before ordering. Published maximum flow and maximum head describe different points on the curve; hose length, lift, fittings and strainers determine the flow your system actually receives.
Shipping information
In-stock and OEM parts: ship same or next business day.
Available items are ready for pickup or shipping between one and three days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.