Minn Kota MKP-6 Weedless Wedge Prop 2061125

Part Information

• Prop Name: MKP-6 Weedless Wedge Prop
• Prop Number: 2061125
• Kit Part Number: 1865003
• Service Part Number: 1378126
• SKU: 27-1865003
• Brand: Minn Kota
• Official Product Type: Trolling Motor Replacement Propeller
• Motor Diameter: 3-1/4 in.
• Prop Style: Weedless Wedge
• Required Prop Nut Kit: MKP-9 / Kit A (included)
• Interchangeable With: MKP-2 Power Prop

What This Part Does

The Minn Kota MKP-6 is a Weedless Wedge replacement propeller for compatible 3-1/4 in. diameter trolling motors. Its wedge-shaped blade design is engineered to push aquatic vegetation away from the blades rather than tangling around them — maintaining thrust and battery efficiency even in heavy weeds, lily pads, and thick cover where a standard prop would stall or wrap.

The MKP-6 is interchangeable with the older MKP-2 Power Prop on compatible motors, making it the recommended current replacement when that prop needs replacement.

Kit Contents

• MKP-6 Weedless Wedge propeller blade
• Prop nut (Kit A / MKP-9)
• Drive pin
• Washer

Compatible Applications

Fits motors with a 3-1/4 in. motor diameter and serial number prefixes "MKJ" through "MKAI" or "J" through "V". Confirm your motor's model and serial prefix before ordering. Compatible motor families include:

• All Terrain — 30, 33, 36, 40, 42, 44
• Edge — 40, 45
• Endura — 30, 34, 36, 38, 40
• Endura Pro — 32, 38
• Maxxum Transom — 30, 33, 36, 40
• PowerDrive — 36, 40
• PowerDrive V2 — 40, 42, 45
• Traxxis — 40, 45
• PowerMax — 36
• Legacy Turbo / Extreme models: 35Ta, 40Ta, 50Ta, 50MXTa, 65Ta, 555T, 565Ta, 665MXTa, 765MXTa, 865MXTa
• 36PD / AP / C
• Riptide: RT27/S, RT40/S

Fitment Notice

Fitment is based primarily on the 3-1/4 in. lower-unit motor diameter and the applicable serial number prefix range. Motor thrust rating alone is not a reliable way to confirm prop fitment — always verify by motor model, series, and serial prefix. If you are unsure, locate the serial number on your motor's label and cross-reference with the list above or contact us before ordering.

Parts Desk Insights

Best Use Case: The MKP-6 Weedless Wedge is the right choice any time you're fishing in heavy aquatic vegetation — lily pads, milfoil, hydrilla, or thick slop — where a standard prop wraps and stalls. Anglers running bass boats, jon boats, or canoes through weedy shallows consistently find it outperforms a Power Prop in coverage-heavy conditions. It's also the correct current replacement when an older MKP-2 Power Prop needs swapping out, since the two are interchangeable on compatible motors.

Common Issues: The most frequent ordering mistake is selecting this prop based on thrust rating alone. Thrust rating and motor diameter do not always align one-to-one across motor families — always confirm the 3-1/4 in. diameter and the serial prefix range. If the prop vibrates after installation, check that the drive pin is fully seated, the prop is not contacting the motor housing at any point, and the shaft is free of fishing line or debris that could cause an imbalance.

Related Products & Accessories

• Minn Kota MKP-9 Prop Nut Kit A (3/8") — the correct prop nut kit for MKP-6; also included in the kit
• Minn Kota MKP-10 Prop Nut (1/2") — prop nut for larger-diameter motor shafts
• Minn Kota MKP-34 Prop Nut — prop nut for compatible motor models
• Minn Kota MKP-7 Weedless Prop 2091150 — weedless prop for larger motor diameter applications
• Minn Kota MKP-38 Weedless Wedge 2 Prop 2341160 — updated weedless wedge design for compatible motors
• Minn Kota MKP-39 Weedless Prop 1865039 — weedless prop for QUEST-series motors
• Minn Kota MKP-40 Power Prop 1865040 — standard power prop for compatible motors
• T-H Marine G-Force Eliminator Prop Nut — MinnKota 80, 101 & 112 lb Thrust — aftermarket prop nut for higher-thrust motors

Service Interval

No scheduled service interval. Inspect the prop before each use for cracks, chips, warping, or blade damage. Check the shaft and drive pin area for wrapped fishing line after each outing in heavy weeds — line accumulation can damage seals and cause drag. Replace the prop if blades are cracked, heavily chipped, or causing noticeable vibration or reduced thrust.

Technical FAQ

• How do I confirm the MKP-6 fits my motor? Verify that your motor has a 3-1/4 in. lower-unit diameter and that its serial number prefix falls within "MKJ" through "MKAI" or "J" through "V". Cross-reference your specific motor model against the compatible models list above.
• What is the difference between the MKP-6 and the MKP-2? The MKP-6 Weedless Wedge and the MKP-2 Power Prop are interchangeable on compatible motors — the MKP-6 is the current production version. The Weedless Wedge blade shape is better suited to vegetation-heavy fishing; the Power Prop style is a more traditional blade design.
• Does the kit include the prop nut and drive pin? Yes — the MKP-6 kit (1865003) includes the prop nut (MKP-9 / Kit A), drive pin, and washer. If you only need the prop blade as a service part, that is part number 1378126.
• Will the Weedless Wedge reduce my top speed? The wedge design is optimised for weed-shedding rather than raw speed. In open water without vegetation, a standard Power Prop may provide slightly more thrust efficiency. In weeded conditions, the MKP-6 consistently maintains better performance by staying clear of vegetation.
• What if my prop vibrates after installation? First, confirm the drive pin is fully and correctly seated. Then verify there is no fishing line or debris wrapped around the shaft. If the prop contacts the motor housing at any point in rotation, the wrong prop size may have been installed.