Volvo Penta Sealing Ring 424830 – OEM IPS Exhaust Seal
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Volvo Penta Sealing Ring 424830
| Part Number | 424830 |
| Brand | Volvo Penta |
| Official Part Type | Sealing Ring |
| Supersedes | 3842223 (historical exhaust system reference) |
| Replaced By | No current supersession identified — 424830 remains the active OEM part number |
| Engine Family | Volvo Penta IPS marine propulsion |
| System | Exhaust — pipe/elbow-to-flange sealing joint |
| Diagram Position | Between exhaust pipe/elbow assembly and flange 3819212, adjacent to gasket 3862150 |
| Weight | 0.024 kg |
What This Part Does
The 424830 is a genuine OEM sealing ring that sits at the exhaust pipe-to-flange joint in Volvo Penta IPS exhaust assemblies. It maintains a pressure-tight, water-cooled seal at this high-heat connection. Because the ring takes a permanent set after heat cycling, it should be replaced any time the exhaust pipe, riser, or flange is removed — not reused.
Compatible Applications
- Volvo Penta IPS-A
- Volvo Penta IPS-B
- Volvo Penta IPS-C
- Volvo Penta IPS-D
- Volvo Penta IPS-E
- Volvo Penta IPS-F
Fitment varies by drive generation, riser height, and exhaust-pipe configuration. Always confirm 424830 against the exact parts diagram for your vessel's serial number before ordering.
Works With These Parts
- Volvo Penta IPS Exhaust Pipe Kit 22896527
- Volvo Penta Exhaust Pipe Kit 3886136
- Volvo Penta Exhaust Pipe Kit 3887735
- Volvo Penta Exhaust Pipe Kit 3842835
- Volvo Penta Exhaust Pipe Kit 3887736
- Volvo Penta Exhaust Pipe 21259299
- Volvo Penta Flange 3819212
- Volvo Penta Exhaust Gasket 3862150
When to Replace
- Exhaust pipe, riser, or flange assembly is removed for any reason
- Original ring shows flattening, hardening, distortion, or compression set
- Exhaust or cooling-water leakage is visible at the joint
- Corrosion has affected the sealing surfaces
- Flange 3819212 or gasket 3862150 is being replaced
Installation Notes
Clean and inspect the sealing surfaces before fitting the new ring. Install in the diagram position shown for the exact exhaust-pipe configuration — orientation and seating depth matter at this joint. Inspect the flange, gasket, and nearby clamps while the system is apart. Torque to Volvo Penta specification for the applicable IPS installation.
Service Interval
Replace at every exhaust-assembly disassembly. There is no fixed calendar interval — this is a one-use sealing ring that should not be reinstalled once removed and heat-cycled.
Technical FAQ
Can I reuse the old sealing ring if it looks undamaged?
No. Once heat-cycled, a sealing ring takes a permanent set and will not re-seal reliably. Always fit a new ring on reassembly.
How do I confirm this is the correct ring for my drive?
Match 424830 to your vessel's exact IPS drive serial number using the Volvo Penta parts diagram. The ring position is shown adjacent to flange 3819212 and gasket 3862150 in the exhaust pipe assembly.
What superseded 3842223?
424830 is the current OEM part number associated with that historical exhaust system reference. Treat 3842223 as a historical ordering number only — 424830 is what to order today.
Parts Desk Insight
This is exactly the kind of low-cost seal worth replacing while the IPS exhaust pipe is already apart. A previously heat-cycled ring that looks fine can still fail to seal properly on reassembly — and a small leak at the exhaust joint usually means a full teardown to fix. Confirming the diagram position before ordering is especially important here, since IPS exhaust configurations vary across drive generations and riser heights.
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 1-3 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.