Cleats & Chocks
Marine Cleats & Chocks
Deck Cleats, Chocks, Fairleads & Line-Handling Hardware
Shop marine cleats and chocks for secure line handling and mooring, including deck cleats, dock cleats, cleat chocks, cam cleats, rope clutches, fairleads, pad eyes, and related mounting hardware.
Match cleat size, line diameter, mounting surface, backing plate, fastener grade, and expected line load before installation.
Cleats and chocks handle real docking loads. Confirm hardware size, fastener pattern, backing support, fair lead angle, bedding compound, and deck-core protection before drilling.
Cleat & Chock Categories
Fitment
Size Cleats to the Boat, Line, and Load
A cleat needs enough horn length for the line diameter and expected load. Docking, spring lines, anchor rode, dinghy tie-downs, and sail-control lines all need different hardware choices.
Line Lead
Chocks and Fairleads Protect the Line Path
Chocks, fairleads, and line guides help keep dock lines from sawing across gelcoat, toe rails, rails, or sharp deck edges. Good lead angles reduce chafe and help hardware carry load correctly.
Add chafe protection where lines touch metal, fiberglass, pilings, docks, or rough surfaces.
Mooring Hardware
Deck cleats, dock cleats, chocks, fairleads, and line guides help secure dock lines, spring lines, breast lines, and anchor rode.
Line Control
Cam cleats, clam cleats, rope clutches, and pad eyes manage running rigging, control lines, small craft lines, and utility tie-downs.
Mounting Support
Stainless fasteners, backing plates, washers, bedding compound, and anti-seize help line-handling hardware stay secure.
Install Notes
Back Loaded Cleats Properly
Docking hardware can see shock loads from wind, wake, current, and surge. Use backing plates or large washers, seal the deck penetration, and make sure the underside is accessible before drilling.
Inspection
Look for Movement, Cracks, and Chafe
Inspect cleats and chocks for loose fasteners, cracked bases, bent horns, rust streaks, leaking bedding, elongated holes, and sharp edges that damage lines.
Mooring Setup
Hardware and Lines Work Together
Even strong cleats can fail if lines are too small, led poorly, or shock-loaded without stretch. Choose dock lines, chafe guards, and hardware as a system.
Recheck hardware after storms, heavy wake exposure, rafting, or any hard docking load.
FAQ
Cleats & Chocks Questions
What size boat cleat do I need?
Cleat size depends on boat size, line diameter, expected load, and mounting location. The cleat should allow proper figure-eight wraps and be strong enough for docking or mooring loads.
Do deck cleats need backing plates?
Loaded deck cleats should generally use backing plates or substantial backing support to spread line loads and reduce the chance of pull-through or deck damage.
What is the purpose of a chock?
A chock guides a dock line or mooring line through a controlled lead angle and helps keep the line from rubbing across sharp or damaging deck edges.
What is the difference between a cam cleat and a deck cleat?
A deck cleat is typically used for securing dock lines and general tie-offs. A cam cleat grips smaller control lines quickly and is common on sailboats, dinghies, and control-line setups.
Ready to Secure the Lines?
Shop Marine Cleats, Chocks, Fairleads & Line-Handling Hardware
Search by cleat type, size, material, line diameter, mounting pattern, backing needs, or line-handling application.
Filters
Sea-Dog 043050 Open Base Nylon Cleat A: 5", B:1-1/16", C:1-7/16", D:2-1/2", #10 FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsSea-Dog 0430301 Open Base Nylon Cleat, A:3", B; 11/16" C; 1" D: 1-5/8", #6 FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsSea-Dog 0430501Open Base Nylon Cleat A: 5", B:1-1/16", C:1-7/16", D:2-1/2", #10 FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsSea-Dog 0430401 Open Base Nylon Cleat A: 4", B:7/8", C: 1-1/8", D: 2" , #6 FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsSea-Dog 0430651 Open Base Nylon Cleat A:6-1/2", B:1-3/8", C:1-11/16", D:2-15/16", #1/4" FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsSea-Dog 043040 Open Base Nylon Cleat A: 4", B:7/8", C: 1-1/8", D: 2" , #6 FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsSea-Dog 043030 Open Base Nylon Cleat, A:3", B; 11/16" C; 1" D: 1-5/8", #6 FH
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base tra...
View full detailsDock Edge Flip-Up Ring Dock Cleat, White
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge Flip-Up Ring Dock Cleat, Polished
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge Dock Cleat Open Base Aluminum, Matte
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an ...
View full detailsDock Edge Dock Cleat Open Base Aluminum, Matte
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an ...
View full detailsDock Edge Dock Cleat Open Base Aluminum, Matte
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an ...
View full detailsDock Edge PortaCleat White
Dock cleat you can take along! Easy to store and use, powder coated cleat with rope ring fits in between dock timbers. Twists 90° to lock in place....
View full detailsDock Edge Mooring Ring White
Traditional mooring ring with white polyester powder coated finish to prevent rusting.2-1/4" Ring.
Dock Edge 2808F Cast Iron Dock Cleat, Galvanized, 8"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge 2806F Cast Iron Dock Cleat, Galvanized, 6"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge 2804F Cast Iron Dock Cleat, Galvanized, 4"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge Flip-Up Dock Cleat, White
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge Flip-Up Dock Cleat, Polished
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge Flip-Up Dock Cleat, White
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge Flip-Up Dock Cleat, Polished
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsSeachoice 30052 316 Cast Stainless Steel Pull Up Cleat w/ Studs, Flush Mount, 6" long
Seachoice Pull Up Cleats mount flush to the deck to maintain your boat's elegant lines when stowed. Simply pull up when ready to use. Safer than or...
View full detailsSeachoice 30042 316 Cast Stainless Steel Pull Up Cleat w/ Studs, Flush Mount, 5" long
Seachoice Pull Up Cleats mount flush to the deck to maintain your boat's elegant lines when stowed. Simply pull up when ready to use. Safer than or...
View full detailsSeachoice 30003 Oval Folding Cleat - Stainless Steel, 8" Length
Mirror-polished, premium folding cleat provides a low-profile, ergonomic design for a sleek appearance while minimizing trip hazards. Constructed o...
View full detailsSeachoice 30001 Oval Folding Cleat - Stainless Steel, 6" Length
Mirror-polished, premium folding cleat provides a low-profile, ergonomic design for a sleek appearance while minimizing trip hazards. Constructed o...
View full detailsSeachoice 30001 Oval Folding Cleat - Stainless Steel, 5" Length
Mirror-polished, premium folding cleat provides a low-profile, ergonomic design for a sleek appearance while minimizing trip hazards. Constructed o...
View full detailsSea-Dog 041608 Cleat, Stainless Open Base,A:8" , B:1-1/2", C:2-13/16", D:1-3/8",1/4" FH
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style.Four thru-bolts required for installatio...
View full detailsDock Edge DE2810F Cast Iron Dock Cleat, Galvanized, 10"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge DE2808F Cast Iron Dock Cleat, Galvanized, 8"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge DE2806F Cast Iron Dock Cleat, Galvanized, 6"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge DE2804F Cast Iron Dock Cleat, Galvanized, 4"
Traditional hot-dip galvanized dock cleats.Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while se...
View full detailsDock Edge DE2608PF Flip-Up Dock Cleat, Polished
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge DE2606PF Flip-Up Dock Cleat, Polished
Where safety is a concern this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. ...
View full detailsDock Edge DE91107F PortaCleat White
Dock cleat you can take along! Easy to store and use, powder coated cleat with rope ring fits in between dock timbers. Twists 90° to lock in place....
View full detailsDock Edge DEDock Cleat Open Base Aluminum, Matte
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an ...
View full detailsDock Edge DEDock Cleat Open Base Aluminum, Matte
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an ...
View full detailsDock Edge DEDock Cleat Open Base Aluminum, Matte
Sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an ...
View full detailsSeaDog 0433621 Heavy Duty Nylon Cleat, Flat Dark Earth, 1 pr.
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stabili...
View full detailsSeaDog 0433421 Heavy Duty Nylon Cleat, Flat Dark Earth, 1 pr.
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stabili...
View full detailsSeaDog 0411361 Rectangular Folding Cleat w/ Hidden Hex Bolts, 6"
This Rectangular Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. I...
View full detailsSeaDog 0411351 Rectangular Folding Cleat w/ Hidden Hex Bolts, 4-1/2"
This Rectangular Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. I...
View full detailsSeaDog 041125B1 Oval Folding Cleat, Black Powder Coated
This Oval Folding Cleat incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up...
View full detailsSeaDog 0411251 Oval Folding Cleat, Polished SS
This Oval Folding Cleat incorporates a positive locking feature with audible click into the open/closed positions for easy rigging. Accommodates up...
View full detailsSeaDog 0411151 Oval Folding Cleat w/ Hidden Hex Bolts, Polished SS
This Oval Folding Cleat features an innovative design incorporating removable hex bolts vs. welded studs, making bolt length choices easy. Incorpor...
View full details4-1/2" Open Base Stud Mt. Cleat
Chrome plated zinc, plastic base.Stainless steel studs, nuts and washers.
Cleat 6" Open Base Chrome Plated
Chrome plated zinc alloy.
Cleat 4" Open Base Chrome Plated 2/Cd
Chrome plated zinc alloy.
6 Chromalex Cleat
Chrome plated zinc alloy with a Black plastic base.