Lewmar Anchor Rode – 9/16" x 200' Nylon with 5/16" x 20' Chain

Lewmar Windlass-Ready Anchor Rode – 9/16" x 200' Nylon with 5/16" x 20' Galvanized Chain

The heavy-duty configuration in the Lewmar windlass-ready rode lineup, this pre-spliced anchor rode is built for larger vessels that demand more rope diameter, more chain weight, and more scope. The 9/16" 3-strand nylon rope and 5/16" ACCO hi-test hot-dipped galvanized chain are engineered to feed cleanly through Lewmar V-Series and Pro-Series windlass gypsies, while the tapered splice ensures a smooth, snag-free rope-to-chain transition under load.

Key Features

• Windlass-optimized design — engineered specifically for Lewmar V-Series and Pro-Series windlass compatibility
• ACCO hi-test, hot-dipped galvanized chain, 5/16" x 20' — heavier chain section for improved catenary and holding power on larger vessels
• 3-strand nylon twist rope, 9/16" x 200' — chemically treated to stay flexible after prolonged saltwater and UV exposure
• Tapered rope-to-chain splice — smooth, snag-free transition through the windlass gypsy
• Heavy-duty sizing — 9/16" rope diameter and 5/16" chain rated for vessels in the 35–55 ft range

Best Use Case

Designed for larger powerboats and sailboats in the 35–55 ft range equipped with a Lewmar V700, Lewmar V4, or other Lewmar V-Series or Pro-Series windlass rated for 5/16" chain. The 200' scope supports anchoring in depths up to 33 feet at a 6:1 scope ratio, and the 20' chain section provides meaningful catenary weight to keep the anchor lying flat and set in wind and current. This configuration is well-suited for extended coastal cruising, overnight anchoring in exposed anchorages, and conditions where a lighter rode would be undersized for the vessel.

Parts Desk Insights

• Confirm your Lewmar windlass gypsy is rated for 5/16" chain before ordering — some V-Series models ship with a 1/4" gypsy. A Lewmar replacement gypsy is available if an upgrade is needed.
• The 9/16" rope diameter is a meaningful step up from 1/2" — it provides higher breaking strength and better grip on a windlass capstan, but verify your windlass capstan groove width accommodates 9/16" rope before purchasing.
• The 20' chain section is a solid choice for most cruising applications. For heavy-weather anchoring or areas with strong tidal current, a 30–50' chain section is still preferred by experienced cruisers.
• 3-strand nylon stretches under load, absorbing shock from wave action and wind gusts — a key advantage over braided rope for anchoring. This protects both the windlass and the anchor cleat.
• Inspect the rope-to-chain splice annually for chafe and corrosion. The splice junction is the highest-wear point on any pre-spliced rode and should be replaced if fraying or rust staining is visible.