Ancor Marine Grade™ Tinned Battery Lugs – 4/0 AWG Cable, 3/8" Fastener, 2-Pack (252726)
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Ultra Heavy-Duty Tinned Copper Battery Lugs – 4/0 AWG, 3/8" Stud
Built for the highest-current connections on board, these Ancor Marine Grade™ tinned copper battery lugs handle 4/0 AWG cable with a 3/8" fastener hole — the stud size found on many heavy-duty marine battery terminals, bus bars, and high-draw equipment. Pure copper construction maximizes current flow, while tin plating provides lasting protection against corrosion in salt air and wet bilge environments. The closed-end barrel seals the cable entry against moisture intrusion for a connection that holds up over years of service.
Sold as a 2-pack, these lugs are sized for a complete battery cable run — one lug at each end.
Compatible Applications
- Marine battery bank connections on 4/0 AWG cable with 3/8" post bolts
- High-capacity inverter and charger cable terminations
- Windlass and bow thruster power feeds
- Main engine starting cable terminations
- Heavy-duty DC bus bar connections
- Commercial and offshore vessel electrical systems
Product Details
- Cable Size: 4/0 AWG
- Fastener Size: 3/8"
- Material: Pure tinned copper
- Barrel: Closed-end to seal out moisture
- Pack Quantity: 2 lugs
- Part Number: 252726
Also available in 4/0 AWG with a 5/16" fastener: Ancor Marine Grade™ Tinned Battery Lugs – 4/0 AWG, 5/16" Fastener, 2-Pack (252725). For 3/0 AWG with a 3/8" fastener, see the Ancor Marine Grade™ Tinned Battery Lugs – 3/0 Cable, 3/8" Fastener, 2-Pack (252716). For a full range of lug sizes, see the Ancor Marine Grade® Tinned Copper Battery Lug Kit – 100-Piece Assortment (255101).
🔧 Parts Desk Insights
Best use case: This is the lug to reach for when you’re terminating 4/0 AWG cable to a battery terminal, bus bar, or high-draw equipment that uses a 3/8" stud — a common size on Group 31, 8D, and 4D batteries, as well as many heavy-duty marine bus bars. The key difference from the 252725 is the fastener hole: 3/8" here vs 5/16" on the 252725. Measure your stud before ordering. If you’re wiring a windlass, bow thruster, or large inverter on 4/0 AWG cable, this lug paired with quality heat-shrink tubing gives you a professional, long-lasting termination.
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 3–4 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.