Golight Stryker ST LED Searchlight – Black, Hardwired Remote – GLT30214ST

Golight Stryker ST LED Searchlight – Black, Hardwired Remote – GLT30214ST

SKU note: This listing uses SKU GLT-30214ST-24. If you are purchasing for a 24V system, confirm voltage compatibility with Golight before ordering — the specifications listed here reflect the 12V configuration.

What This Searchlight Does

The Golight Stryker ST GLT30214ST is the hardwired-remote version of the Stryker ST fixed-mount LED searchlight in a black housing. It delivers 544,000 candela through a focused 8° P-Vex beam with a maximum throw of 4,839 ft. The motor-driven head rotates 370° and tilts 135° with simultaneous pan and tilt from the dash-mounted hardwired controller. A home-return function resets the head to 0° forward instantly.

The IP56 weatherproof rating and anodized aluminum heat sink make this a robust choice for permanent installations in demanding marine and commercial environments. The hardwired remote with fluorescent buttons suits commercial vessels and work platforms where a fixed, wired control point is preferred over wireless.

Compatible Applications

• Marine vessels: commercial fishing boats, workboats, yachts, and larger powerboats
• Docking and night-running illumination
• Search-and-rescue lighting
• Tender retrieval and anchoring assistance
• Emergency, fleet, and utility vehicles requiring a fixed wired remote
• Commercial and industrial work site lighting
• Night-operations applications where a permanently wired control point is required

Kit Contents

• Golight Stryker ST searchlight head (GLT30214ST, black)
• Hardwired dash-mount remote with fluorescent buttons
• Stainless steel mounting brackets and hardware

Related Products

• Golight Stryker ST LED Searchlight – White, Wireless Remote – 30004ST
• Golight Stryker ST LED Searchlight – Black, Wireless Remote – 30514ST
• Golight Stryker ST LED Remote Control Light – Hardwired White
• Golight RadioRay Halogen Searchlight – Gray, Magnetic Shoe Mount

Fitment Notice

Confirm the following before installation:

• Mounting surface is solid, flat, and positioned where the lamp head can rotate and tilt freely
• 12V DC power is available at the mounting location with sufficient current capacity (40W / 3.7A)
• A hardwired run from the searchlight to the dash remote position is feasible
• Full 370° rotation and 135° tilt arc are clear of rigging, antennas, and deck hardware
• If ordering the “-24” SKU variant, confirm 24V compatibility with Golight directly

Installation Notes

• Mount using the included stainless steel brackets on a rigid, solid surface
• Use marine-grade tinned copper wiring, correct gauge for the run length, fused at the supply
• Route all wiring away from heat sources, sharp edges, and moving parts
• Verify polarity before applying power
• Test home-return function and full pan/tilt range before finalizing the installation
• The multi-light selection function allows independent control of two Stryker ST lights from one hardwired remote

When to Replace

• LED output becomes weak, intermittent, or fails entirely
• Pan or tilt motor fails or operates erratically
• Hardwired remote stops responding or has damaged wiring
• Housing is cracked, corroded, or water has entered the head
• Unit no longer provides reliable illumination for safe operation

Service Interval

No scheduled service interval. Inspect mounting hardware, wiring connections, and housing seal annually or at the start of each season. Clean the lens and check for UV degradation or corrosion at hardware contact points. LEDs are not field-replaceable — replace the unit if LED output fails.

Technical FAQ

What is the difference between GLT30214ST and the wireless Stryker ST models?
The GLT30214ST uses a hardwired dash-mount remote. The 30004ST (white) and 30514ST (black) use a 2.4 GHz wireless remote. Optical output and motion specs are identical across all three. Choose hardwired for permanent commercial installations; wireless for vessels where running a control cable to the helm is impractical.

What does IP56 mean?
IP56 means the unit is dust-protected (no harmful ingress) and protected against powerful water jets from any direction. It is suitable for exposed deck mounting but is not rated for submersion.

What does P-Vex lens technology do?
P-Vex is Golight’s proprietary lens design that concentrates the LED output into a tight 8° beam for maximum throw distance, producing the 544,000 candela output with minimal spill.

Can I control two searchlights with one remote?
Yes. The Stryker ST multi-light selection function allows one hardwired remote to independently control two Stryker ST lights.

What voltage does this require?
The standard specification is 12V DC. If the SKU suffix “-24” indicates a 24V version, confirm with Golight before connecting to a 24V system.

Parts Desk Insights

The GLT30214ST is the hardwired version of the Stryker ST, which makes it the preferred choice for commercial vessels and work platforms where a fixed wired control point is more reliable than wireless — less radio interference risk, no battery to replace in the remote. The IP56 rating and anodized aluminum heat sink also make it the more robust build of the Stryker ST line. The SKU on this listing includes a “-24” suffix — worth confirming with the customer whether their vessel is 12V or 24V before the order goes through, as connecting the wrong voltage version can damage the unit.