Lenco Pro Control Assist 12V Trim Tab System – 9" x 12" Standard Kit (15181-106)
Free returns on all eligible orders
You have 30 days to request a return. All sale items are final sale.
Lenco Pro Control Assist 12V Trim Tab System – 9" × 12" Standard Kit
Take full command of your boat's running attitude with the Lenco Pro Control Assist trim tab system. This complete 9" × 12" standard mount kit includes everything needed to install a professional-grade, digitally controlled trim tab system from scratch — blades, actuators, controller, keypad, and all required cabling.
The Pro Control Assist uses a sleek flush-mount keypad with programmable memory position recall, letting you dial in your preferred running angle and return to it instantly at the push of a button. Day and Night display modes keep the interface readable in any conditions, and CAN bus communication keeps wiring clean and installation straightforward.
The 9" × 12" standard blade size is well suited to center console fishing boats, cuddy cabin cruisers, and similar mid-size hulls. Standard mount blades feature a 5/8" flared trailing edge and are fabricated from 12-gauge 304 stainless steel for long-term corrosion resistance.
Key Features
- Complete system — blades, actuators, controller, keypad, and all cabling included
- Programmable memory position recall for repeatable trim settings
- Day and Night display modes for all-condition readability
- CAN bus architecture — clean, expandable wiring with simple daisy-chain connections
- 12-gauge 304 stainless steel blades with 5/8" flared trailing edge
- 2.25" stroke SD Pro actuators, 10" pin-to-pin (15187-001)
- Compatible with Mercury and non-Mercury engine systems (Wake Signal Adapter included)
What's in the Box
- (1) Pro Control Assist Helm Keypad (15175-106)
- (2) 12-gauge 304 stainless steel standard mount blades, 9" × 12" with 1/8" hinge pin
- (2) 2.25" Stroke SD Pro Actuators, 10" pin-to-pin (15187-001)
- (5) Micro C Tee Connectors (30267-001)
- (1) Micro C Power Cable with fuse and ground (30281-001)
- (2) Micro C Drop Cables, 6 ft (30269-002)
- (1) Micro C Drop Cable, 25 ft (30269-004)
- (2) 6-Pin Deutsch to Micro C Actuator Network Adapter Cables (30377-001)
- (2) Pro Control Actuator Power Pigtails, 3 ft (30378-001)
- (2) Wake Signal Adapters for Non-Mercury Systems (30376-001)
Blade Size Guide
The 9" × 12" blade is the smallest in the Pro Control Assist lineup and is best suited to boats in the 17–22 ft range. For larger vessels or heavier hulls, consider stepping up to a 12" × 12" kit:
- Lenco Pro Control Assist 12V Trim Tab System – 12" × 12" Standard Kit (15183-106)
- Lenco Pro Control Assist 12V Trim Tab System – 12" × 12" Edge Mount Kit (15185-106)
Prefer Auto-Levelling?
If you'd like the system to automatically level the boat without manual input, see the Pro Control Auto series:
Add a Flybridge Station
Extend control to a second helm with the Lenco Pro Control Assist Flybridge Keypad Kit (15177-106).
Parts Desk Insights
Best Use Case: This is the right kit for a customer doing a full trim tab installation on a mid-size center console, cuddy cabin, or similar hull in the 17–22 ft range who wants manual memory-position control without the added cost of auto-levelling. Everything needed for a complete installation is included — no additional components are required for a standard single-station helm setup.
Assist vs. Auto: The Pro Control Assist uses manual memory-position control — the operator sets and recalls trim positions. If the customer wants the system to automatically level the boat based on real-time pitch and roll data, they should be directed to the Pro Control Auto 9" × 12" Kit (15182-107) instead.
Blade Size Selection: The 9" × 12" blade is the entry size in this lineup. For heavier or longer hulls (typically 22 ft and up), recommend the 12" × 12" standard or edge mount kits. Edge mount is preferred when transom space is limited or a lower actuator profile is needed.
Non-Mercury Engines: Two Wake Signal Adapters are included, covering both actuators. No additional adapter purchase is needed for non-Mercury installations.
Flybridge Upsell: If the customer has a dual-station vessel, add the Pro Control Assist Flybridge Keypad Kit (15177-106) to the order. It connects directly to the CAN bus network included in this kit.
Shipping information
In-stock and OEM parts: ship same or next business day.
Locally warehoused items: ship within 1-3 business days.
Special-order items: timeline confirmed after order.
Returns & warranty
Returns & Satisfaction Guarantee
We stand firmly behind the quality of every product we sell. Your confidence matters to us — and we back it with a straightforward 30-Day Satisfaction Guarantee.
If you are not fully satisfied, you may request a return within 30 days of delivery. All returns must receive pre-approval prior to being sent back. Unauthorized returns will not be accepted.
To qualify for a return:
Item must be in new, unused condition
Product must be in its original packaging
All parts, components, hardware, manuals, and accessories must be included
Packaging must be undamaged and suitable for resale
Important:
Electronics are strictly inspected. No returns on open-box electronics. Exceptions may apply only with prior written approval. Any electronic unit that has been installed, powered, activated, or altered may not be eligible for return.
We are serious about product integrity — and equally serious about taking care of our customers. If there is ever a product issue, contact us immediately so we can make it right.
For return authorization, please contact our support team before shipping anything back.