Minn Kota MKP-7 Weedless Wedge Prop 2091150

• Prop Name: MKP-7 Weedless Wedge Prop
• Prop Number: 2091150
• Kit Part Number: 1865006
• SKU: 27-1865006
• Brand: Minn Kota
• Official Product Type: Trolling Motor Replacement Propeller
• Prop Style: Weedless Wedge
• Required Prop Nut Kit: MKP-9 / Kit A (included)

What This Part Does

The Minn Kota MKP-7 is a Weedless Wedge replacement propeller for compatible mid-to-higher-thrust trolling motors. Its wedge-shaped blade design sheds aquatic vegetation — weeds, lily pads, milfoil, and thick cover — away from the blades to maintain consistent thrust and preserve battery run time. It is the larger-motor-family sibling to the MKP-6, covering a broader range of higher-thrust Minn Kota models.

Kit Contents

• MKP-7 Weedless Wedge propeller blade
• Prop nut (MKP-9 / Kit A)
• Drive pin
• Washer

Compatible Applications

Fits motors with serial number prefixes "MKJ" through "MKAF" or "J" through "V". Always confirm compatibility against your motor's model number, serial prefix, and parts diagram — do not select by thrust rating alone. Compatible motor families and models include:

• All Terrain — 42, 46, 47, 48, 50, 55, 65, 70
• Camo — 55
• Edge — 50, 55, 70
• Endura — 44, 46, 50, 55
• Endura Pro — 46
• Maxxum — 44, 50, 54, 55, 65, 70
• Maxxum Transom — 46, 50, 55, 70
• Pontoon — 54, 64
• PowerDrive — 50, 55, 65, 70
• Riptide — 50, 55
• Vector — 46, 55
• Vector 3X — 45, 55, 70
• PowerMax — 52
• Legacy numeric models: 112, 212, 312, 412, 512, 524, 712, 724, 812, 824, 112SS, 712SS, 724SS
• Legacy Ta / PD / AP / EX / RT models: 90Ta, 48PD/AP/C, 42PD/AP/C, 42PD/C, 42EX, RT48PD/AP/C, RT42AP/C
• EP series: EP96, EP48, EP42
• Spider 48

Fitment Notice

Select this prop by motor model and serial number prefix — not by thrust rating alone. Multiple prop sizes exist across the Minn Kota range, and the wrong prop can cause vibration, reduced thrust, or motor housing contact. If you are unsure, locate the serial number on your motor label, cross-reference it with the compatible models list above, and verify against your motor's parts diagram before ordering.

Parts Desk Insights

Best Use Case: The MKP-7 is the correct Weedless Wedge prop for the mid-to-upper-thrust Minn Kota families — particularly PowerDrive 50–70, Maxxum, Edge 50–70, and Riptide models in weedy freshwater or saltwater environments. If you fish consistently in heavy vegetation with one of these motors, the Weedless Wedge design will outperform a standard Power Prop by keeping the blades clear. For lighter-thrust motors in the same conditions, see the MKP-6.

Common Issues: The most frequent ordering mistake is selecting this prop based on thrust number alone rather than motor model and serial prefix. The MKP-7 and MKP-6 cover overlapping thrust ranges in different motor families, so always use the model/serial prefix check. Post-install, if the prop vibrates, verify the drive pin is fully seated and check for wrapped fishing line around the shaft — line wrap is the most common cause of vibration and drag after weed-fishing use.

Related Products & Accessories

• Minn Kota MKP-9 Prop Nut Kit A (3/8") — correct prop nut for MKP-7; also included in the kit
• Minn Kota MKP-23 Prop Nut — prop nut for compatible motor models
• Minn Kota MKP-34 Prop Nut — prop nut for compatible motor models
• Minn Kota MKP-6 Weedless Wedge Prop 2061125 — smaller-motor-family Weedless Wedge prop
• Minn Kota MKP-38 Weedless Wedge 2 Prop 2341160 — updated weedless wedge design for compatible motors
• Minn Kota MKP-39 Weedless Prop 1865039 — weedless prop for QUEST-series motors
• Minn Kota MKP-40 Power Prop 1865040 — standard power prop for compatible motors
• Minn Kota MKP-37 3-5/8" Power Prop — power prop alternative for compatible models

Service Interval

No scheduled service interval. Inspect the prop before each outing for cracks, chips, or blade warping. After fishing in heavy weeds, check the shaft area for wrapped fishing line — line accumulation causes drag and can damage shaft seals over time. Replace the prop if blades are cracked, heavily chipped, or if noticeable vibration or thrust loss develops.

Technical FAQ

• How do I confirm the MKP-7 fits my motor? Identify your motor model and the serial number prefix from the motor label. Cross-reference both against the compatible motor list above, and verify against your motor's parts diagram. Do not rely on thrust rating alone.
• What is the difference between the MKP-6 and MKP-7? Both are Weedless Wedge props with the same blade design principle. The MKP-6 covers lighter-thrust motor families (Edge 40–45, Endura 30–40, PowerDrive 36–40, etc.). The MKP-7 covers mid-to-higher-thrust families (Edge 50–70, PowerDrive 50–70, Maxxum, etc.). Check your specific model against each prop's compatibility list.
• Does the kit include the prop nut and drive pin? Yes — the MKP-7 kit (1865006) includes the prop nut (MKP-9 / Kit A), drive pin, and washer.
• Will this prop work in saltwater? Yes — Riptide saltwater models are included in the MKP-7 compatibility list. Rinse the prop and shaft area with fresh water after each saltwater use.
• What if my prop vibrates after installation? Check that the drive pin is fully and correctly seated. Inspect the shaft for fishing line or debris. Confirm the prop is not contacting the motor housing at any point during rotation. If vibration continues, verify you have the correct prop for your motor model.