Minn Kota Riptide Terrova 80 lb Saltwater Bow Mount Trolling Motor – 54" Shaft, 24V

Saltwater-Rated. 24V Power. GPS Precision.

The Minn Kota Riptide Terrova 80 lb is the saltwater-rated version of Minn Kota’s most advanced bow-mount GPS trolling motor. Built with multi-layer corrosion protection from the lower unit up, the 54" shaft configuration is designed for inshore and nearshore saltwater boats with moderate bow heights — delivering 80 lbs of 24V thrust alongside Spot-Lock® GPS anchoring and AutoPilot™ heading control to hold position in tidal current and coastal wind.

Key Features

• 80 lbs of Thrust / 24V: Reliable power for mid-size saltwater boats in tidal current, wind, and coastal conditions
• 54" Indestructible Composite Shaft: Mid-length shaft for moderate bow heights in the Riptide 80 lb family; lifetime guarantee against breakage
• Spot-Lock® with Jog: GPS anchor holds your exact position; micro-adjust with the push of a button
• AutoPilot™: Automatically steers a straight heading so you can focus on fishing
• Advanced Corrosion Protection: Lower unit housings are grit-blasted, aluminum-coated to prevent oxidation, then finished with a powder coat layer — built to handle saltwater exposure
• Digital Maximizer™: Extends battery run time up to 5× compared to conventional motors
• Weedless Wedge™ 2 Prop: Swept-back blades power through grass and debris without bogging down
• Push-to-Test Battery Meter: Instant battery status at the motor head
• Mobile App Compatible: Full control from your Apple® or Android™ device
• Includes: Handheld remote

Compatible Applications

• Saltwater inshore and nearshore fishing boats with moderate bow profiles (approximately 20"–26" bow height)
• Flats boats, bay boats, and aluminum or fiberglass hulls in the 17–21 ft range in tidal and coastal environments
• 24-volt dual battery systems
• Anglers who need 24V GPS anchor control in current and wind without integrated sonar

In the Box

• Minn Kota Riptide Terrova trolling motor (80 lb / 54" / 24V)
• Handheld remote

Related Models

• Need a longer shaft? See the Riptide Terrova 80 lb / 60" Shaft model or the Riptide Terrova 80 lb / 72" Shaft model
• Need maximum saltwater thrust? See the Riptide Terrova 112 lb / 36V models
• Fishing freshwater? See the Terrova 80 lb freshwater models

Parts Desk Insights

Best Use Case: The Riptide Terrova 80 lb / 54" / 24V is the right choice for saltwater anglers with moderate bow heights (approximately 20"–26" from the waterline) on mid-size inshore or nearshore boats in the 17–21 ft range — flats boats, bay boats, and similar hulls where 12V thrust isn’t enough to hold position in tidal current but a full 36V / 112 lb system is more than needed. The 54" shaft is the mid-length option in the Riptide 80 lb lineup, sitting between the shorter and longer shaft configurations.

Shaft Selection Tip: A general rule is to add 16" to your bow height to determine the minimum shaft length needed. Measure from the waterline to the top of the bow mount before ordering. The 54" shaft is typically correct for bows measuring 20"–26" above the waterline. If your bow is higher, step up to the 60" or 72" shaft version.

No Integrated Sonar: The Riptide Terrova line does not include a built-in sonar transducer. If integrated MEGA Down Imaging is a priority, consider the freshwater Terrova 80 lb with MEGA Down Imaging — noting it is not saltwater-rated.

Saltwater Maintenance: Rinse the motor thoroughly with fresh water after every saltwater use. The corrosion protection is robust, but consistent rinsing significantly extends service life.

24V Battery Setup: Requires two 12V batteries wired in series. Use matched batteries of the same age, type, and capacity. AGM or lithium in the 100–120 Ah range recommended.