Minn Kota Riptide Terrova 80 lb Saltwater Bow Mount Trolling Motor – 72" Shaft, 24V

High-Bow Saltwater Reach. 24V Power. GPS Precision.

The Minn Kota Riptide Terrova 80 lb with a 72" shaft is built for larger saltwater fishing boats with high bow profiles where a 60" shaft won’t reach the water cleanly. Multi-layer corrosion protection keeps the motor performing in demanding inshore and nearshore environments, while Spot-Lock® GPS anchoring and AutoPilot™ heading control hold your position in tidal current and coastal wind — all on a manageable 24V system.

Key Features

• 80 lbs of Thrust / 24V: Reliable power for mid-to-large saltwater boats in tidal current, wind, and coastal conditions
• 72" Indestructible Composite Shaft: Maximum reach for high-bow saltwater hulls in the 80 lb family; lifetime guarantee against breakage
• Spot-Lock® with Jog: GPS anchor holds your exact position; micro-adjust with the push of a button
• AutoPilot™: Automatically steers a straight heading so you can focus on fishing
• Advanced Corrosion Protection: Lower unit housings are grit-blasted, aluminum-coated to prevent oxidation, then finished with a powder coat layer — built to handle saltwater exposure
• Digital Maximizer™: Extends battery run time up to 5× compared to conventional motors
• Weedless Wedge™ 2 Prop: Swept-back blades power through grass and debris without bogging down
• Push-to-Test Battery Meter: Instant battery status at the motor head
• Mobile App Compatible: Full control from your Apple® or Android™ device
• Includes: Handheld remote

Compatible Applications

• Mid-to-large saltwater fishing boats with high bow profiles (approximately 28"–36" bow height)
• Larger bay boats, flats boats, and aluminum or fiberglass hulls in the 19–24 ft range in inshore and nearshore environments
• 24-volt dual battery systems
• Anglers who need extended shaft depth with 24V thrust and don’t require a 36V system

In the Box

• Minn Kota Riptide Terrova trolling motor (80 lb / 72" / 24V)
• Handheld remote

Related Models

• Need a shorter shaft? See the Riptide Terrova 80 lb / 60" Shaft model or the Riptide Terrova 80 lb / 54" Shaft model
• Need maximum saltwater thrust? See the Riptide Terrova 112 lb / 36V models
• Fishing freshwater? See the Terrova 80 lb / 72" freshwater model

Parts Desk Insights

Best Use Case: The Riptide Terrova 80 lb / 72" / 24V is the correct choice for saltwater anglers with a high-profile bow (approximately 28"–36" from the waterline) who need more shaft reach than the 60" provides but don’t need to step up to a 36V / 112 lb system. It’s well-suited to larger bay boats and inshore hulls in the 19–24 ft range fishing in tidal current and coastal wind. If your bow is below 28", the 60" shaft model is the better fit.

Shaft Selection Tip: A general rule is to add 16" to your bow height to determine the minimum shaft length needed. Measure from the waterline to the top of the bow mount before ordering. The 72" shaft is typically correct for bows measuring 28" or more above the waterline.

No Integrated Sonar: The Riptide Terrova line does not include a built-in sonar transducer. If integrated MEGA Down Imaging is a priority, the closest freshwater option is the Terrova 80 lb / 60" with MEGA Down Imaging — noting it is not saltwater-rated, and MEGA Down Imaging is not available in a 72" / 80 lb configuration. For 72" shaft with MEGA imaging, the correct step-up is the Terrova 112 lb / 72" with MEGA Down Imaging (freshwater).

Saltwater Maintenance: Rinse the motor thoroughly with fresh water after every saltwater use. The corrosion protection is robust, but consistent rinsing significantly extends service life.

24V Battery Setup: Requires two 12V batteries wired in series. Use matched batteries of the same age, type, and capacity. AGM or lithium in the 100–120 Ah range recommended.